Abstract:Rare-earth elements (which include all lanthanides, scandium, and yttrium) play a key role in many fields including oil refining, metallurgy, electronics manufacturing, and other high-technology applications. Although the available lanthanide resources are enough for current levels of manufacturing, increased future demand for lanthanides will require new, efficient recovery methods to provide a sustainable supply. Membrane adsorbers are promising separation materials to recover lanthanides from high volumes of wastewater due to their tailorable surface chemistry, high binding capacity and high throughput. In this work, membrane adsorbers were synthesized by first using ultraviolet-initiated free radical polymerization to graft a poly(glycidyl methacrylate) (p-GMA) layer to the surface of polyethersulfone membranes. Then, the reactive epoxy groups of the grafted p-GMA were used for the covalent attachment of lysine molecules via a zinc perchlorate-catalyzed, epoxide ring-opening reaction at 35°C. Changes in membrane surface chemistry throughout the functionalization process were monitored with Fourier Transform Infrared Spectroscopy. The degree of grafting for the p-GMA film was quantified gravimetrically and increased with increasing polymerization time. Equilibrium adsorption experiments were performed for single specie solutions of La3+, Ce3+, Nd3+, Na+, Ca2+, and Mg2+ at pH 5.25 ± 0.25. Lysine-modified membranes showed negligible uptake of Na+, Ca2+, and Mg2+. The maximum capacities modeled by the Langmuir isotherm for La3+ and Ce3+ were 6.11 ± 0.58 and 6.45 ± 1.29 mg/g adsorbent, respectively. Nd3+ adsorbed to the membrane; however, the fit of the Langmuir model was not significant and it adsorbed to a lower extent than La3+ and Ce3+. Lower adsorption of the higher charge density species indicates that the primary binding mode is through the amine moieties of lysine and not the carboxylic acid. Dynamic adsorption experiments were conducted with 1 ppm La3+ feed solutions at different flow rates using either a single membrane or three membranes in series. The dynamic binding capacity at 50% breakthrough was independent of flowrate within the tested range. The low-temperature membrane functionalization methodology presented in this work can be used to immobilize biomolecules with even higher specificity, like engineered peptides or proteins, on membrane surfaces.

Selective Adsorption and High Recovery of La3+ using Graphene Oxide/Poly (N-Isopropyl Acrylamide-Maleic Acid) Cryogel

Selective adsorption and high recovery of La<SUP>3+</SUP> using graphene oxide/poly (<i>N</i>-isopropyl acrylamide-maleic acid) cryogel

Scavenging mechanism of rare earth metal ions in water by graphene oxide

Effect of preparation methods on La3+adsorption properties of GO/P(NIPAM-MA) hydrogels

Rare Earth Metal Ions Adsorption Using 2-[2-Oxo-2-(1-pyrrolidinyl)ethoxy]acetic acid/Sodium Alginate Gel

Rare Earth Ions Adsorption Onto Graphene Oxide Nanosheets

Novel nitrogen-rich hydrogel adsorbent for selective extraction of rare earth elements from wastewater

Selectively Recovering Rare Earth Elements with Carboxyl Immobilized Metal-Organic Framework from Ammonium-Rich Wastewater

Mechanistic insights into the adsorption and extraction of rare earth ions using oxygen- and phosphorus-doped porous graphitic carbon nitride

Selective Separation of Rare Earth Ions from Mine Wastewater Using Synthetic Hematite Nanoparticles from Natural Pyrite

Facile synthesis of NaY molecular sieve by low-temperature ultrasonic gelling method for efficient adsorption of rare-earth elements

Selective adsorption of actinides and rare earth elements from leach liquor using metal oxide-polymer nanocomposites

Structural Modification of Polyacrylic Resin by Hydroxamic acid to Increase the Adsorption Performance for rare Earth ions

A Phosphonic Functionalized Biopolymer for the Sorption of Lanthanum (III) and Application in the Recovery of Rare Earth Elements

Highly efficient recovery of heavy rare earth elements by using an amino-functionalized magnetic graphene oxide with acid and base resistance

Selective Adsorption of Rare Earth Elements over Functionalized Cr-MIL-101

Three-dimensional hybrid nitrogen/oxygen-containing components modified graphene oxide as a recyclable adsorbent for rapid adsorption of REEs

Scalable and facile fabrication of sulfonic-acid-functionalized porous hypercrosslinked polymers for efficient recovery of rare earth elements from tailing wastewater

A Lysine-Modified Polyethersulfone (PES) Membrane for the Recovery of Lanthanides

A Chitosan-Based Y3+-Imprinted Hydrogel with Reversible Thermo-Responsibility for the Recovery of Rare Earth Metal

Preparation of emulsion hydrogels encapsulating extractant by the Pickering emulsion template method to recover lanthanum ions in aqueous solutions