Abstract:In order to study the synergistic effects of organic and inorganic thickening agents on the rheological properties of cement paste, the rheological parameters, thixotropy cement-paste containing limestone powder (LP), re-dispersible polymer powder (RPP), and hydroxypropyl methylcellulose ether (HPMC) were investigated using the Anton Paar MCR 102 rheometer at different resting times. The early-age hydration process, hydration products, and microstructure were also analyzed with scanning electron microscopy (SEM) and thermogravimetry analyses (TGA). The results showed that the addition of LP, RPP, and HPMC affected the rheological properties of cement paste, but the thickening mechanism between organic and inorganic thickening agents was different. The small amount of LP increased the plastic viscosity but decreased the yield stress of cement paste due to its dense filling effect. Adding 1% of RPP improved the thixotropic property of cement paste by 50%; prolonging the standing time could improve the thixotropic performance by as much as two times. Only 0.035% HPMC added to the cement paste increased the plastic viscosity by 20%, while the yield stress increased nearly twice. The more HPMC added, the more significant effect it showed. Cement paste compounds with LP, RPP, and HPMC balanced the yield stress and plastic viscosity and improved the thixotropy. The C-L6-R1.0-H0.035 paste presented as a pseudoplastic, its rheological indexes were close to one, and it was hardly affected by the resting time. The composite superposition effect of organic and inorganic thickening agents reduced the impact of resting time for all pastes. As the organic thickening component inhibited the hydration more than the LP promoted the hydration of the cement paste, indicating that the C-L6-R1.0-H0.035 paste remained in the particle fusion stage after curing for three days, as shown by the SEM images.

Variations of Yield Stress of Fresh Cement Pastes in the Presence of Superplasticizer Highlighted by A Hydration Index

Influence of Superplasticizers on Early Age Drying Shrinkage of Cement Paste with the Same Consistency

Influence of Superplasticizer Type and Dosage on Early-age Drying Shrinkage of Cement Paste with Consideration of Pore Size Distribution and Water Loss

Rheological Behaviors of Fresh Cement Pastes with Polycarboxylate Superplasticizer

The Early-Age Drying Shrinkage of Cement-Based Materials with the Same Workability after Temperature Compensation

Study on the rheological properties of Portland cement pastes with polycarboxylate superplasticizers

Influence of Superplasticiser on Early Shrinkage and Total Shrinkage of Concrete

Rheological properties and microstructure of fresh cement pastes with varied dispersion media and superplasticizers

A microstructure-based model for quantifying irreversible yield stress evolution in cement-based pastes during hydration

Rheology and Yield Stress Evolution of Highly Flowable Cementitious Grouting Materials: Mechanisms and Modeling

Effect of Additives on the Rheological and Mechanical Properties of Microfine-Cement-Based Grout

Deformation capacity of fresh cement pastes

In-situ Measurement of Viscoelastic Properties of Fresh Cement Paste by a Microrheology Analyzer

Microstructure Model of Fresh Cement Paste with Superplasticizer Incorporated

Study on the Synthesis and Rheological Properties of Polycarboxylate Superplasticizer with Different Main Link Density

Experimental study on new variety of cement-stabilized soil

Property of Water-Reducing and Crystallization on Superplasticize of the Concrete

Correlation Between the Adsorption Behavior of Colloidal Polymer Particles and the Yield Stress of Fresh Cement Pastes

Rheological Properties and Early-Age Microstructure of Cement Pastes with Limestone Powder, Redispersible Polymer Powder and Cellulose Ether

Yield stress of in-situ polymerization modified cement paste

Rheology of Fresh Cement Pastes Containing Polymer Nanoparticles