Abstract:Perovskite-type proton-conducting materials, such as BaCe0.7Zr0.1Y0.1Yb0.1O3-δ (BCZYYb), are very attractive for the next-generation equipment of electrochemical energy conversion and storage owing to their excellent conductivity in the intermediate-temperature range (300-750 °C), as well as good thermo-chemical stability, coking resistance, and sulfur tolerance. However, the lack of a reliable and cost-effective synthesis method for such multi-component co-doping oxides limits their large-scale application. In this study, for the first time, we successfully synthesize BCZYYb electrolyte nanopowders by using a rapid, scalable flame-based gas-phase synthesis method with two different barium precursors Ba(NO3)2 and Ba(CH3COO)2, named as BCZYYb (N) and BCZYYb (CA). The as-synthesized nanoparticles exhibit good crystallinity of the pure orthorhombic perovskite BCZYYb phase. BCZYYb (CA) shows more uniform doping with the element ratio of 1:0.74:0.12:0.08:0.1, which is very close to the theoretical value. The shrinkage and surface SEM (scanning electron microscope) results indicate that the flame-made powders have superior sinterability compared to the sol-gel-made powders because of the smaller primary particle size (∼20 nm). Electrochemical impedance spectroscopy tests show that BCZYYb (CA) sintered at 1450 °C has the highest protonic conductivity of 1.31 × 10-2 S cm-1 in wet H2 when operating at 600 °C and still maintains a high-level conductivity of 1.19 × 10-2 S cm-1 even when the sintering temperature is reduced to 1350 °C, which is mainly attributed to uniform doping and good sinterability. The activation energy for the conductivity of BCZYYb (CA) is also significantly lower than that of conventional electrolytes, which suggests much better conductivity in the intermediate (∼600 °C) and even lower operating temperature. The excellent conductivity performance combined with the high-throughput production capability makes the swirling spray flame a promising synthesis method for promoting the BCZYYb electrolytes from lab to industrial-scale solid oxide fuel cells.

A Strategy of Tailoring Stable Electrolyte Material for High Performance Proton-Conducting Solid Oxide Fuel Cells (Sofcs)

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

An ammonia fuelled SOFC with a BaCe0.9Nd0.1O3-δ thin electrolyte prepared with a suspension spray

A stable and easily sintering BaCeO3-based proton-conductive electrolyte

Performance of BaCe0.8Y0.2O3-δ Proton Electrolyte Materials for Solid Oxide Fuel Cells by Compositing the Transition Metal Oxide NiO

The Chemical Stability and Conductivity of BaCe0.9−xYxNb0.1O3−σ Proton-Conductive Electrolyte for SOFC

Ce0.8sm0.2o1.9 Decorated with Electron-Blocking Acceptor-Doped Baceo3 As Electrolyte for Low-Temperature Solid Oxide Fuel Cells

Enhancing chemical stability and performance in proton-conducting solid oxide fuel cells through novel composite cathode design

Rapid Gas-Phase Synthesis of the Perovskite-Type BaCe0.7Zr0.1Y0.1Yb0.1O3-δ Proton-Conducting Nanocrystalline Electrolyte for Intermediate-Temperature Solid Oxide Fuel Cells

Tuning an ionic-electronic mixed conductor NdBa0.5Sr0.5Co1.5Fe0.5O5+δ for electrolyte functions of advanced fuel cells

In situ drop-coated BaZr0.1Ce0.7Y0.2O3-δ electrolyte-based proton-conductor solid oxide fuel cells with a novel layered PrBaCuFeO5+δ cathode

In Situ Fabrication of a Supported Ba3Ca1.18Nb1.82O9−δ Membrane Electrolyte for a Proton‐Conducting SOFC

A novel single phase cathode material for a proton-conducting SOFC

High-performing and stable non-doped ceria electrolyte with amorphous carbonate coating layer for low-temperature solid oxide fuel cells

Tailoring triple charge conduction in BaCo<sub>0.2</sub>Fe<sub>0.1</sub>Ce<sub>0.2</sub>Tm<sub>0.1</sub>Zr<sub >0.3</sub>Y<sub>0.1</sub>O<sub>3-</sub> semiconductor electrolyte for boosting solid oxide fuel cell performance

Application of a Triple-Conducting Heterostructure Electrolyte of Ba0.5Sr0.5Co0.1Fe0.7Zr0.1Y0.1O3−δ and Ca0.04Ce0.80Sm0.16O2−δ in a High-Performance Low-Temperature Solid Oxide Fuel Cell

Nb-doped La0.6Sr0.4FeO3−δ as an electrolyte for intermediate-temperature solid oxide fuel cells

Compositing protonic conductor BaZr0.5Y0.5O3 (BZY) with triple conductor BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY) as electrolyte for advanced solid oxide fuel cell

High-entropy design in sintering aids for proton-conducting electrolytes of solid oxide fuel cells

Nickel-doped BaCo0.4Fe0.4Zr0.1Y0.1O3-δ As a New High-Performance Cathode for Both Oxygen-Ion and Proton Conducting Fuel Cells

A new stable BaCeO3-based proton conductor for intermediate-temperature solid oxide fuel cells