Abstract:The durability and service life of reinforced concrete (RC) structural components in bridges and frames are limited by the susceptibility of the reinforcement to corrosion. Corrosion leads to a reduction in the cross-section of the rebar and degrades its material properties. Severe corrosion and damage to stirrups can trigger buckling of the longitudinal bars. Additionally, it has been reported that concrete cracking, caused by mechanical forces, accelerates the corrosion process. The fundamental cause or driving force for all corrosion is the lowering of the system’s Gibbs energy. Based on a lumped damage model and the theory of the thermodynamics of solids, coupling relations of three internal variables (concrete cracking damage, reinforcement plasticity, and corrosion level) are proposed. This macro-model also allows for considering buckling of longitudinal bars and loss of confinement due to corrosion of the transverse reinforcement. By combining available time-dependent corrosion laws with lumped damage constitutive equations, it is possible to predict the life-cycle resistance of RC bridge columns and frames and simulate their behavior when subjected to extreme loading in a corrosive environment. Earthquake forces are considered as an example of such kind of extreme loading. The thermodynamic formulation extends the range of applicability for the available corrosion laws in the literature by including the influence of concrete cracks. Two parametric examples demonstrate the potential applications of the model, including the estimation of critical mass loss for specific structures and the reduction of service life after medium-intensity earthquakes. The accuracy, effectiveness, and computational efficiency of the proposed model are fully verified in terms of the comparisons of experimental and numerical results.

Mechanical Modeling of Damage Accumulation and Life Evaluation for Stress Corrosion Cracking

A Model for Ultra Low Cycle Fatigue Damage Prediction of Structural Steel

A Proposal on Ultra-Low Cycle Fatigue Damage Evaluation of Structural Steels

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Continuum Damage Mechanics Based Fatigue Life Prediction and Fatigue Property Analysis of Pitting Corrosion Steel Bars

A continuum damage model for prediction of crack initiation life of pitting corrosion and fatigue

Corrosion Reliability Analysis Considering the Coupled Effect of Mechanical Stresses

Life Prediction of Corrosion-Fatigue Based on a New Crack Growth Rate Model with Damage and the Extended Finite Element Method

A Corrosion Cracking Mechanism-Based Model with Molten Salt Corrosion Damage Coupling the Effect of Chloride Impurity and Plastic Deformation

Damage Evolution Modeling for Steel Structures Subjected to Combined High Cycle Fatigue and High-Intensity Dynamic Loadings

A Nonlinear Cumulative Evolution Model for Corrosion Fatigue Damage

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

Damage Evolution Model Considering Fatigue Failure Factor Under Multiaxial Non-Proportional Loading

A Model To Predict The Stress Corrosion Cracking Growth Rate Of The Metallic Materials

Methodologies For Predicting Corrosion Fatigue Life

A Phenomenological Life Evaluation Method for Corrosion Fatigue

A coupled creep damage evolution model and creep life evaluation

Isodamage Curve-Based Fatigue Damage Accumulation Model Considering the Exhaustion of Static Toughness

Detail Stress Analysis and Fatigue Crack Initiation Life Prediction of Riveted Joint

Thermodynamic Model of Life-Cycle Deterioration of Seismic Resistance for Complex RC Structures by Coupling Corrosion and Cracking Damage

Macromodeling of Crack Damage in Steel Beams Subjected to Nonstationary Low Cycle Fatigue