Abstract:<p>Joining by elastomeric swaging (ES) is a deformation-based way to manufacture tubular form-fit joints composed of aluminum alloy (AA) tubes and high-strength steel sleeve-fittings. To explore the relationship among the joined tubular material properties, joining behavior and performance of tubular form-fit joints fabricated by elastomeric swaging (ES), this paper took 6061-T4 and 5052-O AA tubes as material cases and carried out a comprehensive investigation by modeling and experiments. In terms of these two AA tubes, their microstructure was characterized by means of EBSD; their mechanical properties were characterized by tension tests based on digital image correlation and Visco-plasticity Self Consistent modeling. The characterization results demonstrate that the 6061-T4 tube has precipitation strengthening mechanism, texture unfavorable to shear, no Portevin–Le Chatelier (PLC) effect, larger strain hardening exponent and higher strength. In view of process, based on the material modeling for anisotropic AA tubes, hyperelastic polyurethane elastomer hose and 15-5PH sleeve, implicit axisymmetric numerical models of ES joining process with loading and unloading were established and validated. The simulation results show that there is a larger normal deformation in the 5052-O tube under the same extrusion depth and rate, and at the same bulging heights as 5052-O, the 6061-T4 tubular joints have larger residual contact shear stress at the undercuts. As for service performance, the ES joining tests and joining performance verification experiments were carried out. The experimental results show that the 6061-T4 tubular joining components have higher pressure resistance, larger pull-out force and better fatigue endurance. In conclusion, the joined tubes with texture unfavorable to shear, higher strength, larger strain hardening exponent and no PLC effect are beneficial to forming form-fit joints.</p>

Joining process for copper and aluminum tubes by rotary swaging method

Tube/Tube Joining Technology by Using Rotary Swaging Forming Method

Rotary Swaging Forming Process of Tube Workpieces

Energy-controlled rotary swaging process for tube workpiece

Relationship among joined tubular material properties, joining behavior and performance by elastomeric swaging

Material Flow in Infeed Rotary Swaging of Tubes

Hydroforming of Aluminum Tubular Parts with Different Diameter

Joining Aluminium to Red Copper by High-Frequency Induction Brazing with Argon Shielding

Preliminary Results of CuCrZr/316L Tube-to-tube Junctions Fabricated with Rotary Friction Welding

Soldering process of aluminum fins in radiator

Numerical and Experimental Study on Expansion Forming of Inner Grooved Tube

Mechanical Expansion of Thick-Walled Microgroove Tube for High Pressure Acr System

Study on magnetic pulse crimping process for joining large-diameter aluminum alloy tube/magnesium alloy shaft

Modeling and analysis of multi-pass progressive flanging force of copper tube end

Warm Hydroforming of Aluminum Alloy Part by Axially Different Heating Zones

New technology for brazing aluminum clustered tube of refrigerator

Die Design and Finite Element Analysis of Welding Seams during Aluminum Alloy Tube Extrusion

Experimental and Numerical Investigation on Axial Hydro-Forging Sequence of 6063 Aluminum Alloy Tube

Realization of ODS-Cu/T91 Tube-to-tube Joining with Rotary Friction Welding

A new tube forging process for manufacturing hollow parts with inner flange at an arbitrary location

Microstructure and Properties of Aluminum Aa6061-T6 to Copper (Cu)-T2 Joints by Cold Metal Transfer Joining Technology