Abstract:Generally, optical methods for precision measurement have limitations when rotation of large angle (larger than 10°) and translation of large range occur simultaneously. To deal with the problem, an improved method based on spatial magnetic detection is proposed for planar 3-degree-of-freedom position measurement with large ranges in this article. The position-solving algorithm of the method calculates position by decoupling 3 degrees of freedom with the magnetic flux densities of the inherent magnetic field of the permanent-magnet synchronous planar motor detected by the proposed Hall-sensor array. On the basis of previous work, the calculation approach of decoupling is improved; as a result, the calculations for solving position are simplified. The characteristics of the sensor topology are exploited further, and a new calculation approach of decoupling is introduced to compensate the original one, achieving better robustness to noise. The ability of solving 3-degree-of-freedom position and the robustness to noise and magnetic-field imperfections are evaluated by simulation; the results show that the accuracies of translational and rotational motions are 10 µm scale and 0.1° scale in the case with noise of 0.01% of signal amplitude, while they are 100 µm scale and 10° scale in the case with the magnetic-field imperfections caused by parameter deviations. Comparison experiments with commercial sensors are conducted on a self-developed testing platform to verify the feasibility of the method, and the results show that the method can achieve sensing a large rotational angle and a large translational range with a simple implementation.

High Accuracy Magnetic Field Measurement Methods Based on Hall Sensor

Research on the Temperature Characteristic of Magnetic Sensor in the Magnetic Drift Compensation Fiber-Optic Gyroscope

Three Dimensional Compensation Spherical Coils for Compact Atomic Magnetometers

Construction and Experimental Verification of a New Miniature Low-Noise Hall Sensor for Wide-Range Vector Magnetic Field Measurements

Single-Chip Integrated 3-D Hall Sensor

Study of Current Measurement Method Based on Circular Magnetic Field Sensing Array

Effects of Meloxicam on Hematologic and Plasma Biochemical Analyte Values and Results of Histologic Examination of Kidney Biopsy Specimens of African Grey Parrots (Psittacus erithacus)

Method of Improving the Measurement Accuracy of Magnetic Material Characteristic for Open Circuit Test Specimen

Cumulative Error Calibration of Fluxgate Sensor Considering Temperature Effects

Study on Fast and Precise Measurement of Three-Dimensional Displacement Using Hall Sensors

Simulation and optimization of conductor structural parameters of free-space hall-effect current sensor

Improved Component Compensation of Magnetic Interferential Field for Geomagnetic Vector Measurement System Using 3-D Helmholtz Coil

Modeling of Three-Axis Hall Effect Sensor Based on CMOS Process

A CMOS Hall sensor modeling with readout circuitry and microcontroller processing for magnetic detection

Optimization of Hall Position Sensor for Permanent Magnet Synchronous Linear Motors

A novel planar 3D magnetic position measurement methodology using linear Hall sensors

A Position Measurement Method for 3-Degree-of-freedom Motion Based on Magnetic Detection.

The Calibration Method of Magnetometer Based on A Triaxial Non-coincident Model

Magnetic Calibration System With Interference Compensation

The national agenda for Healthcare Associated Infection, Antimicrobial Resistance and Infection Prevention and Control in Scotland: Structures, current priorities and programmes

Zero-crossing method for hard iron interference and zero drift compensation applied to magnetometers