Abstract:Current sensors based on the fluxgate magnetic field meter and feedback zero-field operating principle have excellent current measurement accuracy and linearity in a large range of up to thousands of amperes. An excitation current (${I}_{e}$ ) is employed in a magnetic fluxgate sensor to magnetize the magnetic core periodically, which will generate magnetization distortion that affects the performance of the sensor. This article proposes a novel scheme for suppressing the magnetization distortion through electrical compensation. The source of the magnetization distortion is theoretically derived and analyzed. It is found that the magnetization distortion is a function of the excitation current ${I}_{e}$ and is not affected by the primary current. Since ${I}_{e}$ is a periodical current that is determined by the parameters of the sensor itself, it is feasible to inject a specified periodical current to the output port of the sensor to cancel the magnetization distortion. Compared with the magnetization distortion compensation method with an additional core and coil, this method does not need to pair the cores or coils, which significantly reduces the complexity of the production process and saves space for the sensor. A prototype sensor with electrical compensation is designed, fabricated, and tested. Experimental results show that the compensation setting significantly suppresses the magnetization distortion signal. The amplitude of the basic frequency component is reduced from 24 to $6.8 ~\mu \text{V}$ . The other odd harmonics of the magnetization distortion are also reduced. The electrical compensation method works properly in a large current range from −1.5 to 1.5 kA. The scale accuracy of the prototype sensor is less than 5.7 ppm (parts per million). The compensation method can suppress the magnetization distortion to a similar level with operating temperature changes from room temperature to 50 °C.

The national agenda for Healthcare Associated Infection, Antimicrobial Resistance and Infection Prevention and Control in Scotland: Structures, current priorities and programmes

Research on the Temperature Characteristic of Magnetic Sensor in the Magnetic Drift Compensation Fiber-Optic Gyroscope

Software Compensation for the Coupling Error of a Single-Mode Fiber Coil under Time-Varying Temperature and Magnetic Field

An Optical Microfiber Taper Magnetic Field Sensor with Temperature Compensation

Temperature Dependence of the Off‐diagonal Magnetoimpedance in Sensor Configuration Utilizing Co‐rich Amorphous Wires

Three Dimensional Compensation Spherical Coils for Compact Atomic Magnetometers

Temperature Compensated Fiber Optic Magnetic Sensor Based on the Combination Interference Principle.

Temperature Compensation of Optical Fiber Current Sensors With a Static Bias

Research on the Temperature Compensation of Optical Fiber Displacement Sensor Based on Multisensor Data Fusion.

Temperature Compensation Method for Tunnel Magnetoresistance Micro-Magnetic Sensors Through Reference Magnetic Field

Temperature Compensated Magnetic Field Sensor Using Magnetic Fluid Filled Exposed Core Microstructure Fiber

Temperature-compensated Optical Fiber Magnetic Field Sensor with Cascaded Femtosecond Laser Micromachining Hollow Core Fiber and Fiber Loop

Optical Fiber Sensor with Stable Operating Point for AC Magnetic Field Measurement

Temperature Compensation Method of Fluxgate Sensor Based on Polynomial Fitting

Artificial Neural Network Compensation for an Optical Fiber Temperature Sensing System Based on Optical Time Offset

Design and implementation of a temperature-insensitive heterogeneous resonant magnetic field sensor

Fiber Optic Fabry-Perot Magnetic Field Sensor with Temperature Compensation Using a Fiber Bragg Grating

Temperature self-compensating photonic crystal fiber grating magnetic field sensor

Simultaneous Measurement of Magnetic Field and Temperature Based on SMF-MMF-SMF-HCF-SMF Fiber Structure

Electrical Compensation for Magnetization Distortion of Magnetic Fluxgate Current Sensor

Temperature-Insensitive Integrated Optical Electric Field Sensor Based on Asymmetric Mach–Zehnder Interferometer