Abstract:Generally, optical methods for precision measurement have limitations when rotation of large angle (larger than 10°) and translation of large range occur simultaneously. To deal with the problem, an improved method based on spatial magnetic detection is proposed for planar 3-degree-of-freedom position measurement with large ranges in this article. The position-solving algorithm of the method calculates position by decoupling 3 degrees of freedom with the magnetic flux densities of the inherent magnetic field of the permanent-magnet synchronous planar motor detected by the proposed Hall-sensor array. On the basis of previous work, the calculation approach of decoupling is improved; as a result, the calculations for solving position are simplified. The characteristics of the sensor topology are exploited further, and a new calculation approach of decoupling is introduced to compensate the original one, achieving better robustness to noise. The ability of solving 3-degree-of-freedom position and the robustness to noise and magnetic-field imperfections are evaluated by simulation; the results show that the accuracies of translational and rotational motions are 10 µm scale and 0.1° scale in the case with noise of 0.01% of signal amplitude, while they are 100 µm scale and 10° scale in the case with the magnetic-field imperfections caused by parameter deviations. Comparison experiments with commercial sensors are conducted on a self-developed testing platform to verify the feasibility of the method, and the results show that the method can achieve sensing a large rotational angle and a large translational range with a simple implementation.

Optimization of Hall Position Sensor for Permanent Magnet Synchronous Linear Motors

Error Compensation of Linear Hall Based Position Detection for Tubular Permanent Magnetic Linear Synchronous Motor

A Hall Sensor-Based Position Measurement with On-Line Model Parameters Computation for Permanent Magnet Synchronous Linear Motor

Analog-Hall-Sensor-Based Position Detection Method With Temperature Compensation For Permanent-Magnet Linear Motor

An Improved Position Detection Method for Permanent Magnet Linear Motor Using Linear Hall Sensors

Position Detection and Error Compensation for Tubular PMLSM with Hall-effect Sensors

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

Analysis and Compensation of Hall Sensor-Based Position Detection Errors in TPMSLM

Checking method of initial position for surface-mounted permanent magnet linear synchronous motor

An improved rotor position estimation in PMSM with low-resolution hall-effect sensors

A Parameter Adaptive Feedforward Compensation Method for SPMSM Using Hall-Effect Sensor

Research on Rotor Position Estimation of PMSM Based on Hall Position Sensor

A Position Measurement Method for 3-Degree-of-freedom Motion Based on Magnetic Detection.

Low-cost motor position detection method by linear Hall-effect sensors

An Improved PMSM Rotor Position Sensor Based on Linear Hall Sensors

Planar 3-Degree-of-freedom Position Sensing Method Based on Decoupling Using a Linear-Hall Array

Planar Position for Permanent-Magnet Synchronous Motor Using Historical and Magnetic-Detection Information

Comparative Performance Evaluation of Hall Effect Sensorless Control Options in Permanent Magnet Brushless DC Motor Drives

A novel planar 3D magnetic position measurement methodology using linear Hall sensors

Sensorless Position Estimation for Permanent Magnet Synchronous Linear Motor with Variable Coupling Length

A Low-Cost Three-Degree-of-Freedom Position Measurement Method of the Y-type Maglev Planar Motor Based on Hall Sensor