Abstract:Czochralski (CZ) silicon is a base material for manufacturing integrated circuits (ICs). The mechanical strength of CZ silicon determines the processing limitations and often dominates the issues related to packaging and failure of ICs. With the ever-smaller feature size of ICs, the scaling of device dimensions may indirectly lead to increase the stress in silicon substrate, thus increasing the probability of generating dislocations. Consequently, improving the mechanical strength of CZ silicon is of significance for increasing the manufacturing yield of ICs. In this work, we propose a strategy of co-doping germanium (Ge) impurity and nitrogen (N) impurity into CZ silicon to achieve better mechanical strength. In order to explore the feasibility of such a strategy, we comparatively investigate the room-temperature hardness and dislocation gliding behaviors in the temperature range of 600–1200 ℃ in the conventional CZ silicon, Ge-doped CZ silicon, N-doped CZ silicon, as well as N and Ge co-doped CZ silicon. The significant experimental results are described as follows. 1) Ge-doping, N-doping or co-doping of Ge and N hardly influences the hardness and therefore the dislocation gliding behavior at room temperature. 2) The suppressing effect of N-doping on the dislocation gliding is remarkable at 600–1000 ℃ and becomes weakened at the temperatures higher than 1100 ℃, while Ge-doping hardly affects the dislocation gliding at 600–900 ℃ but exhibits a strong suppressing effect on the dislocation gliding at 1000–1200 ℃. 3) Co-doping Ge and N impurities into CZ silicon can take the complementary advantages of both Ge- and N-doping to suppress the dislocation gliding at 600–1200 ℃. It is believed that N-doping can result in the formation of N-O complex-related pinning agents within the dislocation cores to suppress the dislocation gliding at 600–1000 ℃. For Ge-doping, it is supposed that Ge-O complexes acting as the pinning agents can form near the front of a single dislocation when the temperature is as high as 1000 ℃ and above. In a word, it is verified in this work that co-doping Ge and N into CZ silicon can further improve the mechanical strength at the processing temperatures of ICs fabrication.

Silicon Used for Sub-Micro LSI

Monocrystalline Silicon Used for Integrated Circuits: Still on the Way

Advancing in Research of One-dimensional Silicon Nano-materials

Germanium doping for improved silicon substrates and devices

Germanium Doping of Si Substrates for Improved Device Characteristics and Yield

Defect Engineering In Silicon Used For Ultra Large-Scale Integrated Circuits

Silicon: the Semiconductor Material

Mechanical Strength of Czochralski Silicon Crystal: Effects of Co-Doping Germanium and Nitrogen

High-fidelity Moulding Growth and Cross-section Shaping of Ultrathin Monocrystalline Silicon Nanowires

Single-Crystal Silicon: Growth and Properties

Two-dimensional devices and integration towards the silicon lines

Fabrication of Silicon-based Microstructures and Its Application in Microchips

Silicon as a mechanical material

Silicon micro- and nanofabrication for medicine

Impurity Engineering of Czochralski Silicon

Post-CMOS Process for High-Aspect-ratio Monolithically Integrated Single Crystal Silicon Microstructures

Novel metal silicide materials for nanometer scale CMOS technology

Silicon microstructuring technology

Methods to Protect Silicon Microstructures from the Damages in Deep Reactive Ion Etching

Research on Silicon Wafer Manufacturing Process and Physical Properties Testing Using High-Purity Polysilicon

Study on the application of silicide in surface micromachining