Abstract:A water-soluble soldering flux, aiming at making the flux-cored Sn-0.7Cu solder wire for soldering aluminum and its alloys, has been developed in this study, whose active matrix contains different amounts of zinc and tin metal oxides or salts. The solderability of Sn-0.7Cu solder on 6061 aluminum alloy (6061Al) substrate and corrosion resistance of Sn-0.7Cu/6061Al joints using the developed flux are evaluated systematically. Results show that an increase in content of both zinc-oxide and zinc-salt in the flux can significantly improve the solderability of Sn-0.7Cu solder and chemical corrosion resistance of Sn-0.7Cu/6061Al joints, in particular the increase of zinc-salt content shows a more effective role in increasing the corrosion resistance of the joints. There are a large number of micro-sized Zn-containing particles and network-like Zn-containing phase on the surface of 6061Al arisen from the reaction between the substrate and flux containing zinc-oxide or zinc-salt. During the soldering process, the complex reactions among the flux, Sn-0.7Cu solder and 6061Al result in formation of a combined system of Sn-0.7Cu/Zn/Al, in which Zn plays a key role in forming Zn metallization on the surface of 6061 aluminum. Meanwhile, an increase in content of tin-salt in the flux can also improve the solderability of Sn-0.7Cu solder but reduce the chemical corrosion resistance of Sn-0.7Cu/6061Al joints. There is a flat Sn metallization layer formed on the surface of 6061Al. The result indicates that the role of Sn metallization is only for improving the solderability of Sn-0.7Cu solder rather than effectively enhancing the corrosion resistance of Sn-0.7Cu/6061Al joints.

Research and Analysis of Zn-Al Alloy Soft Flux

Zn-Al Alloy Soldering

Recent Researches and Development of Brazing Flux for Aluminum

Research on the Corrosion Behavior of Low Carbon Mold Flux on Submerged Nozzle Refractory

Study on a New Flux Used in Aluminium Melt Purification

Effect of New Flux on the Purification of A356 Aluminum Alloy

Improvement of the electrochemical properties of Zr-based AB2 alloys by an advanced fluorination technique

Wetting of liquid Zinc-aluminum-magnesium alloy on steel substrate during hot-dipping: Understanding the role of the flux

Study on Novel Fluxes for the Purification of Aluminum Alloy

Result and Analysis of a Rare Earth Flux Used in Aluminum Melt

Elucidating the effect of Al2O3/SiO2 mass ratio upon SiO2-MnO-CaF2-Al2O3-based welding fluxes: Structural analysis and thermodynamic evaluation

Preparation and Electrochemical Properties of AlMgZnSnPbCuMnNi High Entropy Alloys with Low Free Corrosion Potentials

Aluminum Solder Paste and Its Application

Mechanism to remove oxide inclusions from molten aluminum by solid fluxes refining method

Effect of Al Content on the Microstructure and Properties of Zn-Al Solder Alloys

Influence Of Metal-Oxide/Salt Content In The Aluminum Soldering Flux On Solderability And Corrosion Resistance Of Sn-0.7cu/6061al Joints

A structure-oriented elucidation for viscous flow of SiO2-MnO-Al2O3 fused submerged arc welding fluxes

Analysis of New Lead-Free Solder Alloy Microstructure

Influence Of The Zinc-Oxide/Salt Content In The Aluminum Soldering Flux On Interfacial Microstructure And Mechanical Property Of Sn-0.7cu/Al Joints In Assembling Led Lighting Components

Research and Development of Sn-Zn Lead-free Solder

Wetting Behaviour of Zn–Al Filler Metal on a Stainless Steel Substrate