Abstract:Due to the extremely complex and strict service conditions of non-magnetic drill collars, the friction, wear and corrosion will lead to their damage and failure. Therefore, the surface modification technology can be used to substantially improve the surface performance and effectively extend the service life of non-magnetic drill collars. Under this engineering background, the laser cladding technology was employed to fabricate pure Inconel 625 and Inconel 625/WC coatings on the surface of TWZ-2 non-magnetic steel substrate, and the influences of WC content on the microstructure, phase composition, element distribution, microhardness and wear and corrosion resistance of these coatings were analyzed. The experimental results show that the microstructures of pure Inconel 625 and Inconel 625/WC coatings are all composed of planar grain, cellular grain, columnar grain and equiaxed grain successively. The phases of pure Inconel 625 coating are composed of γ-Ni phase and Laves phase. With WC particles mixed into Inconel 625 powder, various carbide phases appear in the composite coatings. The higher the WC content, the more the precipitated carbides formed by the reaction, thus aggravating the segregation of the solid solution strengthening elements. Besides, W and C elements present severe local segregation due to the undissolved WC particles. In terms of the hardening and strengthening effects of WC particles, the microhardness of the coatings gradually increases with the rise of WC content. The wear mechanisms of substrate and coatings are all compound wears, and different wear forms have different priorities. Accordingly, the wear mechanisms would change with the WC content. The higher the WC content, the lower the wear loss of coating, and the better the wear and friction resistance. Moreover, the corrosion resistance of coatings is better than that of substrate. With the increase of WC content, the corrosion resistance of the composite coatings decreases gradually.

Selection of Surface-Layer Composites for the Parts of Slurry Pump

Research on WC/Cast Iron Matrix Surface-layer Composites for Slurry Pumps

Search for New Materials for Slurry Pumps with Erosion-wear Resistance

Preparation of WC Particle Surface Reinforced Steel Composite by Using Additive

Interfacial characteristics and wear resistance of WCp/white-cast-ion composites

Interfacial Characteristics and Wear Resistance of WCp/White-Cast-Iron Composites

Study on Surface WC Particle Reinforced Chromium Abrasion Resistant White Cast Irons Composite

Abrasive Erosion Comparison for A Ceramics and A High Chrome Cast Iron Applied in A Slurry Pump

Fabrication of WC Particles Reinforced Iron Matrix Surface Composites by Centrifugal Casting

Interface Structure and Wear Behavior of Cr26 Ferrous Matrix Surface Composites Reinforced with CTC P

Producing WC Particles Reinforced Gray Cast Iron Matrix Steel Rolled Guiding Board in Sand Mold

The Development of WC Particle Reinforced High Chromium Cast Iron Matrix Surface-layer Composites Lining Plates of Eject Orifice

Microstructure and Wear Behavior of High-Cr WCI Matrix Surface Composite Reinforced with Cemented Carbide Rods

On the Preparation and Wear Properties of Ceramic Particle-reinforced High-chromium Cast Iron-based Surface Composite Material

Elucidation of Abrasive Wear and Slurry Erosion Behavior of Fe Matrix Composites Reinforced with Metallic Coating Modified ZTAP Ceramics

The Development of High Carbon Chromium Iron Power Reinforced Steel Matrix Wear-resistant Surface-layer Composite

Interfacial Characteristics of WC Particles Reinforced Hadfield Steel Matrix Composites

Study on Erosive Wear and Novel Wear-Resistant Materials for Centrifugal Slurry Pumps

Producing of WCp Reinforced SG lron Composites Firebrick Mould And Its Abrasive Wear Behavior

Interface and wear characteristics of high-Cr cast iron matrix composite reinforced with cemented carbide particles

Microstructure and properties of composite coatings by laser cladding Inconel 625 and reinforced WC particles on non-magnetic steel