Abstract:For the purpose of reducing weight of steel parts, save raw materials and keep or even improve safety standards, the development of advanced high strength steels is increasingly demanded in the automotive industry and engineering applications. We have proposed a novel heat treatment (quenching-partitioning-austempering treatment, Q-P-A) to obtain steel parts with high strength and good ductility. The Q-P-A process is intended to produce microstructure consisted of carbon-depleted martensite, carbon-enriched retained austenite and nanostructured bainite. Quenching(Q) treatment fabricates mixed microstructure of carbon-supersaturated martensite and certain amounts of untransformed austenite. Partitioning(P) thermal treatment accomplishes fully diffusing of carbon from the supersaturated martensite phase to the untransformed austenite phase and enriching the amount of carbon in untransformed austenite. Further low-temperature austempering(A) process induces incredible thin bainite from the carbon-enriched untransformed austenite. A study of the microstructure and mechanical properties of 50SiMnNiNb steel subjected to the novel Q-P-A treatment is presented. Microstructure is assessed by optical microscope(OM), field emission scanning electron microscope(FESEM) and transmission electron microscope(TEM), and the corresponding mechanical properties are measured. The experimental results indicate that attractive mechanical properties of steels during the Q-P-A process are attributed to the complex multi-phase structure. Slender plates of bainite with 20-40 nm thick are generated in the medium carbon steel. Meanwhile, with increasing of the volume fraction of nanostructured bainite, yield strength of steel parts is increased with little degradation of ultimate tensile strength. In this paper, a novel quenching-partitioning-austempering heat treatment is proposed, and the attractive mechanical properties of steels are obtained during the Q-P-A process.

Study on quenching & partitioning heat treatment for hot-stamped high-strength steel B1500HS

Application of Hot Stamping Process by Integrating Quenching & Partitioning Heat Treatment to Improve Mechanical Properties

Research on One-Step Quenching and Partitioning Treatment and Its Application in Hot Stamping Process

Microstructure and Performance Evaluations on Q&P Hot Stamping Parts of Several UHSS Sheet Metals

Effect of hot stamping and quenching & partitioning process on microstructure and mechanical properties of ultra-high strength steel

Research on Hot Stamping-Carbon Partition-Intercritical Annealing Process of Medium Manganese Steel

Enhanced Mechanical Properties of A Hot Stamped Advanced High-Strength Steel Treated by Quenching and Partitioning Process

Research on Q&P Hot Stamping Process Integrated with Fractional Cooling Strategy

A Newly-Designed Hot Stamping Plus Non-Isothermal Q&P Process to Improve Mechanical Properties of Commercial QP980 Steel

Application of a Model for Quenching and Partitioning in Hot Stamping of High-Strength Steel

Hot Formation Quality of High Strength Steel BR1500HS for Hot Stamping Without Cooling System

Fractional Cooling Strategy of the Hot-Stamping Process and Its Influence on Formability and Mechanical Properties of Ultra-High-Strength Steel Parts

Ultrahigh strength-ductile medium-Mn steel auto-parts combining warm stamping and quenching & partitioning

Microstructure and mechanical properties of Si-modified hot stamping steels treated by Q&P process

Improve Bendability of a Cr-alloyed Press-Hardening Steel Through an In-Line Quenching and Non-Isothermal Partitioning Process

Microstructure and Mechanical Properties of 50simnninb Steel by A Novel Quenching-Partitioning-Austempering Heat Treatment

Martensitic Microstructural Transformations from the Hot Stamping, Quenching and Partitioning Process

Study on the Effect of Heat Treatment on Microstructures and High Temperature Mechanical Properties of Welding Spots of Hot Stamped Ultra-High Strength Steel Patchwork Blanks

Integrated Modelling of Microstructure Evolution and Mechanical Properties Prediction for Q&P Hot Stamping Process of Ultra-High Strength Steel

Improving Hydrogen Embrittlement Resistance of Hot-Stamped 1500 MPa Steel Parts That Have Undergone a Q&P Treatment by the Design of Retained Austenite and Martensite Matrix

Experimental Study on Thermodynamic Performance of Boron Steel B1500HS Used for Hot Stamping Process