Abstract:This article introduces an eco-friendly method for the reclamation of carbon fiber-reinforced polymers (CFRP). The research project involved numerous experiments using microwave-assisted pyrolysis (MAP) to explore a range of factors, such as the inert gas flow, the power level, the On/Off frequency of rotation, and the reaction duration. To design the experiments, the three-level Box-Behnken optimization tool was employed. To determine the individual and combined effects of the input parameters on the thermal decomposition of the resin, the data were analyzed using least-squares variance adjustment. The results demonstrate that the models developed in this study were successful in predicting the direct parameters of influence in the microwave-assisted decomposition of CFRPs. An optimal set of operating conditions was found to be the maximum nitrogen flow (2.9 L/min) and the maximum operating experimental power (914 W). In addition, it was observed that the reactor vessel's On/Off rotation frequency and that increasing the reaction time beyond 6 min had no significant influence on the resin elimination percentage when compared to the two other parameters, i.e., power and carrier gas flow rate. Consequently, the above-mentioned conditions resulted in a maximum resin elimination percentage of 79.6%. Following successful MAP, various post-pyrolysis treatments were employed. These included mechanical abrasion using quartz sand, chemical dissolution, thermal oxidative treatment using a microwave (MW) applicator and thermal oxidative treatment in a conventional furnace. Among these post-treatment techniques, thermal oxidation and chemical dissolution were found to be the most efficient methods, eliminating 100% of the carbon black content on the surface of the recovered carbon fibers. Finally, SEM evaluations and XPS analysis were conducted to compare the surface morphology and elementary constitution of the recovered carbon fibers with virgin carbon fibers.

On the Carbonization Process of CMWF DPF Filter Core

Microwave-Assisted Pyrolysis of Carbon Fiber-Reinforced Polymers and Optimization Using the Box-Behnken Response Surface Methodology Tool

Microwave assisted preparation of activated carbon from biomass: A review

Simulation of microwave heating device for activated carbon preparation

Carbon-enabled microwave chemistry: From interaction mechanisms to nanomaterial manufacturing

Decreasing the environmental impact of carbon fibre production via microwave carbonisation enabled by self-assembled nanostructured coatings

Research on dynamic microwave low-temperature carbonization of high performance carbon fiber

APPLICATION OF MICROWAVE HEATING IN POROUS CARBON TREATING

Detailed manufacturing process of a tubular carbon microfiltration membrane for industrial wastewater treatment

Using aerosols to create Nano-scaled membranes that improve gasoline particulate filter performance and the development of Wafer-based membrane coated filter analysis (WMCFA) method

Research on the recovery process and product performance of carbon fiber flexible sucker rod in microwave field

Tailoring Wood Waste Biochar As a Reusable Microwave Absorbent for Pollutant Removal: Structure-property-performance Relationship and Iron-Carbon Interaction.

Microwave Preparation of Catalyst Layer for Enhancing the Oxygen Reduction of Air Cathode in Microbial Fuel Cells

Hierarchically core-shell Ni@C-NCNTs nanocomposites tailored for microwave-induced dry reforming of methane process

Microwave Driven Steam Reforming of Biomass Model Tar Based on Metal Organic Frameworks (ZIF-67) Derived Co/C Catalyst

Metal-Organic Framework Supporting Fe3O4 Prepared by Microwave in Couple With NTP to Eliminate VOCs From Biofuel

Preparation of High-Value Porous Carbon by Microwave Treatment of Chili Straw Pyrolysis Residue

Characteristics and Optimization Strategy of Microwave Thermal Regeneration of Spent Activated Carbon Based on a Multi-Physical Field Model

[Study on Preparation Mechanism and Property of Biomass Environmental Coordination Function Material with Fourier Transform Infrared Spectrum].

Preparation and characterization of PFNR-based carbon membrane for microfiltration

Preparation and characterization of activated carbon from wool waste and the comparison of muffle furnace and microwave heating methods