Abstract:As a typical carbon-based material, activated carbon (AC) has satisfied adsorption performance and is of great significance in the field of volatile organic compounds (VOCs) pollutants removal. In order to further reveal the optimization mechanism of AC adsorption performance, coconut shell-based AC was selected as the research object, and different concentrations of HNO 3 coupled with microwave were used for rapid modification and activation. The characteristic changes of pore structure and surface chemical of AC before and after rapid modification were analyzed, and the performance changes of VOCs absorption were discussed from the perspective of reaction kinetics. The pore structure and surface chemical properties of before and after modification were analyzed by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Brunauer-Emmeta-Teller (BET) analysis, Fourier Transform Infrared Spectroscopy (FTIR), and Boehm titration. The results showed that HNO 3 coupled with microwave could significantly eliminate impurities in the pores of AC. After impregnation in HNO 3 at a concentration of 1.5 mol L −1 and under microwave irradiation of 900 W, the number of micropore on the surface of samples increased slightly. When the impregnation concentration of HNO 3 continued to increase, the two adjacent pore structures of the samples merged, which lead to a large decrease in the number of micropore and a corresponding increase in the proportion of mesoporous. Meanwhile, the specific surface area S BET of the modified NAC-6 sample increased to 1,140.40 m 2 g −1 , and the total acidic oxygen-containing functional groups on the surface increased by 0.459 mmol g −1 compared to that of the unmodified raw carbon. Furthermore, by analyzing the experimental results of formaldehyde adsorption on AC samples, it was concluded that the saturated adsorption capacity of the modified NAC-6 sample was 43% higher than that of the raw carbon. This study provides a more convenient and faster modification method for AC in the field of gas phase pollutants purification, which is helpful to realize the practical engineering application of AC with high efficiency, energy saving and sustainable.

[Study on Preparation Mechanism and Property of Biomass Environmental Coordination Function Material with Fourier Transform Infrared Spectrum].

Optimization Of Preparation Program For Biomass Based Porous Active Carbon By Response Surface Methodology Based On Adsorptive Property

Preparation of Hydrophobic Hierarchical Pore Carbon–silica Composite and Its Adsorption Performance Toward Volatile Organic Compounds

Precise Preparation of Biomass-Based Porous Carbon with Pore Structure-Dependent VOCs Adsorption/desorption Performance by Bacterial Pretreatment and Its Forming Process.

Performance optimization and kinetic analysis of HNO3 coupled with microwave rapidly modified coconut shell activated carbon for VOCs adsorption

Preparation and Properties of Stearic Acid/ Porous Carbon Composites

Study on preparation and thermal property of binary fatty acid and the binary fatty acids/diatomite composite phase change materials

Co3O4 Nanoparticle-Modified Porous Carbons with High Microwave Absorption Performances

Experimental and DFT Investigations on Adsorption-Regeneration Performance and Deactivation Mechanism over Engineered Carbon Fiber: Role of Pore Structure and Functional Groups

Coassisted Carbonization with HCOOK/(HCOO)2Ca for the Fabrication of Bamboo-Derived Oxygen-Doped Porous Carbons Exhibiting High-Performance Sorption of Diethyl Phthalate from Aqueous Solutions.

Preparation and characterization of activated carbon from wool waste and the comparison of muffle furnace and microwave heating methods

Preparation and characterization of modified diatomite/fatty acid form-stable phase change material

Study on the correlation between pore morphology of porous calcium silicate and high-capacity formaldehyde adsorption

Agarics-derived Porous Fe/C Material Activated by ZnCl2 and Its Enhanced Microwave Absorption Performance

Preparation Of Phosphorus-Containing Porous Carbon By Direct Carbonization For Acetone Adsorption

Preparation And Characterization Of Activated Carbons From Biomass-Based Carbon Through Phosphoric Acid Activation

Functionalized construction of biochar with hierarchical pore structures and surface O-/N-containing groups for phenol adsorption

THE STUDY OF PHENOLIC RESIN-BASED MESOPORE ACTIVATED CARBON WITH SUPERHIGH SPECIFIC SURFACE AREA

Hierarchical Porous Structure Formation Mechanism in Food Waste Component Derived N-doped Biochar: Application in VOCs Removal.

Systematic study of dynamic CO2 adsorption on activated carbons derived from different biomass

PREPARATION AND CHARACTERISTICS OF CARBONACEOUS ADSORBSENTS OBTAINED FROM WASTE CATION-EXCHANGE RESINS