Abstract:Coal tar pitch was ground into powder and hydroformed with high pressure. After pre-oxidation, the pitch was activated by CO2 at high temperature. The effects of different preparation conditions on the yield, pore structure and phenol adsorption capacity of activated carbon were investigated, and activated carbon prepared under suitable conditions had good adsorption performance. A pore volume of 1-10 nm is the main absorption structure according to the analysis of pore size distribution and phenol adsorption capacity. The activated carbon showed high mechanical strength through compressive strength tests. Graphite nanocrystals around 5 nm were observed in the TEM images, and it illustrates that grain refinement results in the high strength. These nanocrystal stacked structures are easier to make and enlarge pores by activation than graphite layer stacked structures. Surface functional groups are considered not to be the active sites of phenol adsorption as suggested by the results of FTIR and Boehm's titration, and acidic oxygen-containing functional groups are harmful to phenol adsorption, which happen to be removed in the reductive preparation atmosphere. The donor-acceptor complex mechanism can be ruled out, and the pi-pi interactions are considered the most likely mechanism. The Langmuir and Reach-Peterson models are better fitted to the adsorption isotherms. Adsorption kinetics fit the intraparticle diffusion model best. Comparison of different activated carbons shows that suitable pore size is important for phenol adsorption. Thermodynamic parameters demonstrate that the adsorption process is spontaneous and exothermic, and the entropy increases. Pitch-based high-strength columnar activated carbon is an effective and low cost adsorbent for phenol wastewater treatment. This carbon nanocrystal material also provides a new direction for catalyst carriers.

THE STUDY OF PHENOLIC RESIN-BASED MESOPORE ACTIVATED CARBON WITH SUPERHIGH SPECIFIC SURFACE AREA

Facile, Low-Cost, and Sustainable Preparation of Hierarchical Porous Carbons from Ion Exchange Resin: an Improved Potassium Activation Strategy

A Comparative Study of Phenolic Resin-Based Activated Carbons by Means of Supercritical Water Activation and Steam Activation

Preparation of Phenolic Resin-based Spherical Activated Carbon and Adsorption of CO2

Hierarchical Pore Structure of Activated Carbon Fabricated by CO2/microwave for Volatile Organic Compounds Adsorption

Preparation and Electrochemical Properties of PF-based Activated Carbon

Preparation, characterization and adsorption performance of high surface area biomass-based activated carbons

Preparation of porous carbons from phenol–formaldehyde resins with chemical and physical activation

Preparation of High Surface Area Activated Carbon from Spent Phenolic Resin by Microwave Heating and KOH Activation

Orthogonal experimental study on activated carbon from biomass hydrolysis residues activated by carbon dioxide

Preparation of Expanded Graphite-based Carbon/Carbon Composites and Its Adsorption Properties on Phenol

A study on the preparation of pitch-based high-strength columnar activated carbon and mechanism of phenol adsorption from aqueous solution

Adsorption of phenol on CO2-treated activated carbon

Preparation of Activated Carbon Microspheres from Phenolic Resin with Metal Compounds by Sub- and Supercritical Water Activation

Preparation of Phosphate-activated Carbon from the Coconut Fibers

Optimization Of Preparation Program For Biomass Based Porous Active Carbon By Response Surface Methodology Based On Adsorptive Property

Preparation of Mesoporous Carbon by Phenol Resin Polymerization-dependent Phase Separation and Pyrolysis

Preparation of High-Surface-Area Activated Carbon from Coconut Shell Fibers

Waste Phenolic Resin Derived Activated Carbon By Microwave-Assisted Koh Activation And Application To Dye Wastewater Treatment

Ultra-large Specific Surface Area Activated Carbon Synthesized from Rice Husk with High Adsorption Capacity for Methylene Blue

PREPARATION AND CHARACTERISTICS OF CARBONACEOUS ADSORBSENTS OBTAINED FROM WASTE CATION-EXCHANGE RESINS