Abstract:Nano-aerosols are airborne aerosols in the range of 100 nm. They are present abundantly in both pollutants and viruses, both of which affect human health. Filtering these nano-aerosols leads to high-pressure drop in cabin filters due to their small sizes forming impermeable dust cake, and prior to cake formation the capture efficiency is rather poor with conventional microfiber filters. We have investigated a composite filter with a microfiber layer positioned immediately upstream of a nanofiber layer. Such composite filter provides high efficiency and low-pressure drop during all phases of filtration of nano-aerosols: initial depth filtration, transition, and final cake filtration. The behavior of the composite filter together with various filter benchmarks (single and composite filters of microfiber/nanofiber filters) has been investigated by monitoring the pressure drop, especially during cake filtration. Using the measurements together with Ergun/Kozeny-Carman equation and material balance we come up with a new method to determine the solid volume fraction and permeability of the cake. The grade efficiency for the most penetrating particle is also measured concurrently to define the incipient point to cake formation and provide material balance. Most importantly, for the first time we have confirmed that the cake ultimately forms on the composite filter is due to the cake that originates from the upstream microfiber layer and not from the downstream nanofiber layer. Therefore, the pressure drop for the composite filter can be sustained relatively low throughout the filtration. On the other hand, the aerosol capture efficiency stays very high from start-to-end of filtration, with high initial filtration efficiency courtesy of the nanofiber filter installed downstream of the composite filter. The price to pay is a slightly higher pressure drop for the composite filter in the clean unloaded state, but this is insignificant during aerosol loading as most pressure drop is attributed to that of the cake. For the first time we have introduced, also independently using Buckingham-Pi analysis, a brand new dimensionless parameter, Beta, which measures the equivalent “thickness” of additional cake deposition (in molten form) to the viscous flow resistance “path length” due to the additional cake deposit. A high-capacity filter aimed for heavy aerosol loading should have large Beta that results in low solidosity, high porosity, and high permeability for the cake. In our study, the microfiber-nanofiber composite filter has the highest Beta of nearly 4 and also highest efficiency. Despite high efficiency the single nanofiber filter has much lower Beta of 2, while the single microfiber filter has Beta of 3, yet much lower efficiency, especially at initial filtration. Using the microfiber-nanofiber composite filter design, we can “engineer the cake” deposited on the filter to be more permeable and with least flow resistance during aerosol loading to attain high Beta values. This is an innovative approach to increase the badly needed aerosol storage capacity with low pressure drop for the nanofiber filter while maintaining high efficiency throughout the aerosol loading for extended filtration applications. The highly permeable aerosol cake can also be cleaned by backpulsed-and-backblow readily for filter reuse.

Using aerosols to create Nano-scaled membranes that improve gasoline particulate filter performance and the development of Wafer-based membrane coated filter analysis (WMCFA) method

A dual-geometry pore-size-resolved model to predict deep-bed loading in a wall-flow filter

Study on Test Instrument and Filtration Theory of the Carbonized Micron Wood Fiber Dpf

Filtration efficiency analysis of fibrous filters: Experimental and theoretical study on the sampling of agglomerate particles emitted from a GDI engine

Study On Flow Resistance And Filtration Efficiency Of The Carbonized Micron Wood Fiber Dpf

An Experimental Investigation of the Impact of Washcoat Composition on Gasoline Particulate Filter (GPF) Performance

Mixing Rules for an Exact Determination of the Dielectric Properties of Engine Soot Using the Microwave Cavity Perturbation Method and Its Application in Gasoline Particulate Filters

Single wall diesel particulate filter (DPF) filtration efficiency studies using laboratory generated particles

Removal of PM and oil mist from automobile exhaust by a "Hamburger" structured conjugated microporous polymers membrane

Efficient desulfurization by polymer-inorganic nanocomposite membranes fabricated in reverse microemulsion

Study of Soot Dynamic Behavior and Catalytic Regeneration in Diesel Particulate Filters

Microfiber-nanofiber composite filter for high-efficiency and low pressure drop under nano-aerosol loading

Puffy hierarchical nanonet structured multifunctional membranes for NO degradation and ultrafine dust filtration

Advances in soot particles from gasoline direct injection engines: A focus on physical and chemical characterisation

Fuel economy benefits in internal combustion engines due to soot restructuring in the particulate filter by water injection

Filtration performance and loading capacity of nano-structured composite filter media for applications with high soot concentrations

Advancing Marine Post-combustion Soot Control: Diesel Engine Particles and Soot Capture Through Electrostatic-Enhanced Filtration

Exhaust non-volatile particle filtration characteristics of three-way catalyst and influencing factors in a gasoline direct injection engine compared to gasoline particulate filter

Adsorption properties of carbonized micron wood fiber filter for nanoparticles emitted by engine

Modeling of Soot Fragmentation That Proceeds in a Catalyzed Diesel Particulate Filter of a Diesel Engine

Synthesis of Nanoporous Acicular-Mullite Ceramic and Electroless Platinum Coating for Particulate Matter Entrapment and Catalytic Combustion