Abstract:Experimental investigations of heat transfer at prototypical conditions of supercritical water cooled reactors (SCWRs) are strongly limited due to their huge technical and financial efforts required. One of the possible solutions is the application of model fluids, which have much lower critical pressure and critical temperature. Model fluid technique has been widely applied in the thermal-hydraulic studies of nuclear engineering. In spite of growing activities of heat transfer at supercritical conditions using model fluids, there does still not exist any reliable fluid-to-fluid scaling methods, to transfer the test data in model fluids directly to the conditions of prototype fluid. This paper presents a fluid-to-fluid scaling method for heat transfer in circular tubes cooled with supercritical fluids. Based on conservation equations and boundary conditions, one set of dimensionless numbers and the requirements of a complete scaling are determined. Scaling of pressure and temperature ensures the similarity of thermo-physical properties of various fluids. A new dimensionless number, presenting the product of the so-called pseudo Boiling number, Reynolds number and Prandtl number, is applied to scale heat flux. The distortion approach is used to scale mass flux. The scaling of heat transfer coefficient is based on Nusselt number. In addition, a new approach is introduced to validate the scaling law. The validation results show good feasibility and reasonable accuracy of the proposed scaling law. Assessment of scaling factors of various parameters indicates the high feasibility of Freon-134a as model fluid for SC water. Some guidelines can be derived for the future experimental investigations on heat transfer at supercritical pressures using model fluid techniques. (C) 2010 Elsevier B.V. All rights reserved.

Fluid to Fluid Modeling of CHF in Round Tube

Fluid-to-Fluid Modelling of CHF at High-Pressure Subcooled Water Conditions

Fluid-to-fluid Modeling of Critical Heat Flux in 4×4 Rod Bundles

Researches in the Flow Modeling of Critical Heat Flux in Bundle

Prediction of CHF in vertical heated tubes based on CFD methodology

Fluid-to-fluid Scaling of Heat Transfer in Circular Tubes Cooled with Supercritical Fluids

Numerical Prediction of CHF Based on CFD Methodology under Atmospheric Pressure and Low Flow Rate

Experimental and Theoretical Study on Liquid-Vapor Behavior Characteristics Near CHF

Applicability Research of Round Tube CHF Mechanistic Model in Rod Bundle Channel

A New Method on Fluid-to-fluid Scaling for Heat Transfer in Tubes at Supercritical Pressures

An experimental study of the CHF in a square channel with non-uniformly heated rod under low pressure and low flow conditions

Study on CHF Characteristics in Narrow Rectangular Channel under Complex Motion Condition

A Critical Heat Flux Model for Unilateral Heating Rectangular Narrow Channel

Research on prediction of non-uniform heated rod bundle CHF based on subchannel analysis code coupling modified mechanistic model

Study on the CHF Correction Factor under Rolling Condition in Vertical Tube

Study on Application of CHF Models on Reactor Pressure Vessel Lower Head for Severe Accident Condition

Experimental investigation and a mechanical model of critical heat flux in a narrow rectangular channel

Studies on the Critical Heat Flux in Fuel Assembly Using a Modified Two-Phase Multi-Scale Interface Model-Validation and Sensitivity Analysis

Numerical investigation of azimuthal heat conduction effects on CHF phenomenon in rod bundle channel

Prediction of Critical Heat Flux in Rod Bundle Based on CFD Methodology

An Improved Liquid Film Model to Predict the CHF Based on the Influence of Churn Flow