Abstract:In vessel retention (IVR) is one of the key severe accident mitigation strategies to maintain reactor pressure vessel (RPV) integrity. IVR designs utilize the reactor pressure vessel lower head to contain molten fuel and rely on external reactor vessel cooling (ERVC) to remove decay heat. The capacity of ERVC is limited by the critical heat flux (CHF) of flow boiling on the outside of the reactor vessel surface. Therefore, the determination of critical heat flux (CHF) is crucial to predict whether the adoption of IVR would be successful in mitigating severe accidents. In 1999, Celeta et.al proposed a superheated layer vapor replenishment model. In this model they postulated that CHF would occur when the superheated layer was occupied by the vapor blanket coming into contact with the heated wall and they successfully predicted the critical heat flux in subcooled water flow boiling under high mass flux, high liquid subcooling and low/medium pressure conditions. To evaluate the practicability of this model in predicting CHF under IVR conditions, CHF experiments were performed under natural circulation conditions on the experiment facility "Test of External Vessel Surface with Enhanced Cooling" (TESEC). Experiments are conducted in a 30 mm wide, 61mm high rectangular flow channel with a 200 mm long heated surface along the flow direction. Two quartz windows are installed at the sidewalls of the flow channel for visualization. In order to simulate various positions of the reactor lower head, experiments at different inclination angles of the test section were conducted. The high speed visualization data at CHF point at various inclination angles were processed and analyzed by a MATLAB code developed by the author. The vapor blanket thickness at various inclination angles was measured from the visualization data and was also predicted by the Celeta model. By using geometry data from high speed images, CHF values were calculated by Celeta model and compared with the experimental results at various inclination angles. Limitations of the Celeta model in adaptation of predicting CHF under IVR conditions were further discussed.

Study on Application of CHF Models on Reactor Pressure Vessel Lower Head for Severe Accident Condition

A Theoretical CHF Model for Downward Facing Surfaces and Gaps under Saturated Boiling

Theoretical Study on Critical Heat Flux for Reactor Lower Head Using Subscale Boundary Layer Boiling Model

Numerical Investigation on the CHF Model and Prediction for the External Cooling Channel of Lower Head

A Critical Heat Flux Model for IVR-ERVC Application Based on the Experimental Observation

Theoretical Research of CHF in Hemispherical Narrow Gap Channel Between Molten Corium and Lower Head

Evaluation of Passive Circulation Flow Characteristics and Chf under In-Vessel Retention

A Critical Heat Flux Model for Saturated Flow Boiling on the Downward Curved Heated Surface

Development of CHF Models for Inner and Outer RPV Gaps in a Meltdown Severe Accident

Prediction Of subcooled water flow boiling critical heat flux (CHF) at low pressure

CHF experiments and prediction model under subcooling flow boiling condition in passive IVR-ERVC system

Prediction of Critical Heat Flux (CHF) for the High-Pressure Region in Uniformly Heated Vertical Round Tubes

Development of mechanistic model for CHF based on boiling crisis process

A Two Dimensional Approach for Temperature Distribution in Reactor Lower Head During Severe Accident

Parameter Study for Critical Heat Flux under External Reactor Vessel Cooling Condition Based on a Mechanism Model

Theoretical analysis of the characteristics of critical heat flux in vertical narrow rectangular channels under motion conditions

Theoretical model for subcooled upward flow boiling heat transfer and critical heat flux for an inclined downward heated surface

Numerical Prediction of CHF Based on CFD Methodology under Atmospheric Pressure and Low Flow Rate

Study on the Lower Head Failure in Severe Accident Part I: Model Development and Validation

An Improved Liquid Film Model to Predict the CHF Based on the Influence of Churn Flow

Prediction of Critical Heat Flux for Subcooled Flow Boiling in Annulus and Transient Surface Temperature Change at CHF