Abstract:The critical heat flux (CHF) of flow boiling in a mini-channel is vital for equipment safety, but the boiling crisis triggering mechanism has been proved unsatisfactory. In this study, the VOSET method is adopted to investigate CHF of subcooled flow boiling in a vertical rectangular mini-channel by considering the conjugated heat transfer and using a reasonable nucleation site density model. Hundred of bubbles are accurately captured, and the evolutions of flow pattern, dry patch, and wall superheating are reproduced. Based on those, the relationship between boiling crisis and dry patch is demonstrated. When the heat flux is lower, some middle-sized isolated bubbles adhere to the wall surface with a dry patch below. This dry patch can be rewetted quickly. Hence, the wall superheating increases slightly along the flow direction and is within control. With the increasing heat flux, the dry patch expands because some big bubbles merge into the elongated bubble, leading to the local heat transfer deterioration, but the local wall superheating rise is still limited due to heat conduction inside the solid wall and the rewetting effect. However, the continuous coalescence of elongated bubbles midstream and downstream causes the appearance of an almost permanent dry patch with a high local wall superheating of 183.04 K near the outlet of the mini-channel when the heat flux rises to 500 kW/m 2 , which has exceeded the CHF of 375 kW/m 2 obtained in this study. This triggering mechanism of the flow boiling crisis is new and different from the traditional ones. Besides, the departure from nucleate boiling (DNB) is found at 325 kW/m 2 , beyond which the wall superheating increases rapidly with heat flux.

Numerical investigation of azimuthal heat conduction effects on CHF phenomenon in rod bundle channel

Prediction of Critical Heat Flux in Rod Bundle Based on CFD Methodology

3D Numerical Investigation on Flow Boiling Characteristics in Large Length-to-diameter Ratio Microchannel

Numerical investigation of critical heat flux during subcooled flow boiling in a vertical rectangular Mini-channel

Numerical simulation of boiling behavior in vertical microchannels

Experimental investigation and a mechanical model of critical heat flux in a narrow rectangular channel

Numerical Investigation Of Flow Boiling In A Manifold Microchannel Heat Sink With Conjugate Heat Transfer

Numerical Simulation of Heat Transfer Characteristics of Supercritical Water in 2 × 2 Bundles

Theoretical study on the characteristics of critical heat flux in vertical narrow rectangular channels

Theoretical analysis of the characteristics of critical heat flux in vertical narrow rectangular channels under motion conditions

Prediction of CHF in vertical heated tubes based on CFD methodology

Investigation on visualization and heat transfer performance study of the mini-channel flow boiling

Numerical Study on Effect of Gap Width of Narrow Rectangular Channel on Critical Heat Flux Enhancement

Numerical Investigation of Flow and Heat Transfer Characteristics of Subcooled Boiling in a Single Rod Channel With/without Spacer Grid

Investigation of flow boiling critical heat flux and heat transfer within a horizontally oriented channel with one-sided heating at three levels of subcooled inlet

Research on prediction of non-uniform heated rod bundle CHF based on subchannel analysis code coupling modified mechanistic model

Numerical Investigation on Saturated Boiling and Heat Transfer Correlations in A Vertical Rectangular Minichannel

Prediction of Critical Heat Flux for Subcooled Flow Boiling in Annulus and Transient Surface Temperature Change at CHF

CFD Investigation of the Cold Wall Effect on CHF in a 5 × 5 Rod Bundle for PWRs

Subchannel Analysis of Critical Heat Flux in Radially Non-Uniform Heated Rod Assembly at Low Flow Rate

Numerical Study on the Critical Heat Flux Based on the Two-Phase Multi-Scale Interface Model Using OpenFOAM