Abstract:Mask Projection micro-Stereolithography (MPμSL) is an additive manufacturing technique capable of producing solid parts with micron-scale resolution from a vat of photocurable liquid polymer resin. Although the physical mechanism remains the same, the process differs from traditional laser-galvanometer based stereolithography (SL) in its use of a dynamic mask UV projector, or digital light processor (DLP), which cures each location within each 3D layer at the same time. One area where MPµSL has garnered considerable attention is in the field of microfluidics and Lab-on-a-Chip, where complex multistep microfabrication techniques adopted from the semiconductor industry are still widely used, and where MPµSL offers the ability to fabricate completely encapsulated fluidic channels in a single step and at low cost [1–3]. However, a significant obstacle exists in the prevention of channel blockage due to overcuring of the polymer resin [4, 5]. Overcuring can be attributed to the so-called ‘back side effect’ [2] which occurs during the build process as light from successive layers penetrates into the resin to a depth greater than the layer thickness. This effect is most prevalent in channels or features oriented horizontally (in a parallel plane to that of the build platform). Currently there are two main approaches in controlling the cure depth; 1. the chemical approach, which involves doping the resin material with a chemical light absorber [6–8]; and 2. by improving the system's hardware and optical elements to improve the homogeneity of the light dosage and control the cure depth [9]. Here we investigate a third approach through modification of the 3D CAD file prior to printing to mitigate for UV light leakage from successive build layers. Although used here in conjunction with the MPμSL technique, this approach can be applied to a range of SL techniques to improve printer resolution and enable production of internal features with higher dimensional accuracy.

Research on rapid prototyping of planar mask in micro-manufacture

Rapid Prototyping of Soft Lithography Masters for Microfluidic Devices Using Dry Film Photoresist in a Non-Cleanroom Setting

Rapid prototyping of PDMS microdevices via <i></i>PLAT on nonplanar surfaces with flexible hollow-out mask

Prototyping of Masks, Masters, and Stamps/molds for Soft Lithography Using an Office Printer and Photographic Reduction

Rapid Prototyping of Organ-on-a-Chip Devices Using Maskless Photolithography

Ceramics Fabrication Using Rapid Prototyping of Mask Projection Stereolithography

The Key Technology and Research Status of Mask Projection Stereolithography

MEMS Microfabrication Technology Based on Rapid ProtoTyping

Fast Mask Image Projection-Based Micro-Stereolithography Process for Complex Geometry

Development of a Multi-Step Exposure Method for Projection-Based Printing System

Rapid Prototyping of Multilayer Thermoplastic Microfluidic Chip

Rapid Fabrication of Paper-Based Microfluidic Analytical Devices with Desktop Stereolithography 3d Printer

Printing Depth Modeling, Printing Process Quantification and Quick-Decision of Printing Parameters in Micro-Vat Polymerization

Study on Integrated Method of Medical Implant Manufacture Based on Rapid Prototyping Technology

Research on Micro-Machine and Method of Micro-Fabrication

Mitigation and control of the overcuring effect in mask projection micro-stereolithography

Rapid prototyping of etch test structures for hard mask development using electron beam lithography

An integrated manufacturing system for rapid tooling based on rapid prototyping

Rapid Prototyping of Poly(methyl Methacrylate) Microfluidic Systems Using Solvent Imprinting and Bonding.

Near-field sub-diffraction photolithography with an elastomeric photomask

Investigation of Inkjet-Printed Masks for Fast and Easy Photolithographic NIL Masters Manufacturing