Abstract:OBJECTIVE:To compare the wear resistance and surface roughness of nanofiller-containing composites and microhybrid composites after simulated wear.METHODS:Five microhybrid composites and five nanofiller-containing resin composites were included in the study. Six cylindrical specimens with a diameter of 10 mm and a thickness of 6 mm for each material were prepared. The volume loss, vertical loss and the surface roughness (Ra) were determined after 800 cycles of simulated chewing motion. One specimen of each material was analysed by scanning electron microscopy (SEM) to compare the morphology of the wear surfaces. The microhybrid composites group and nanofiller-containing composites group were tested using the Mann-Whitney U test with a significance level of α = 0.05.RESULTS:For all microhybrid composites, the average wear volume loss and vertical loss were 56.44 mm3 and 730.6 µm, respectively, while the average wear losses of nanofiller-containing composites were 40.15 mm3 and 528.17 µm, respectively. The nanofiller containing composite GNH400N showed the least roughness (Ra = 0.346 ± 0.076 µm), while the conventional microhybrid composite Ceramage showed the highest roughness (Ra = 0.699 ± 0.214 µm). However, wear resistance and surface roughness for the two groups showed no statistical difference. SEM micrographs of the nanofiller-containing composites after wear testing showed smoother and more uniform wear surfaces than for the microhybrid composites.CONCLUSION:Nanofillers did not significantly influence the wear resistance of resin composites, but might improve the surface roughness of resin composites.

Affects of nano-diamond contained filler on the compressive strength and microhardness of composite resin

The researchment of nami-material reinfoced dental composite resin

Effects of the proportion of ultrafine diamond and zirconia on the flexural strength of core resin

Mechanical Properties of Dental Composite Resins Containing Nanodiamond of Different Diameters

Nanoindentation Study on Mechanical Properties and Curing Depth of Dental Resin Nanocomposites

Effect of Nanohydroxyapatite, Zirconia and Glass Filler Particles on the Wear and Microhardness of Experimental Dental Composite Resin

Effects of Nano-TiO2 Filler By Physical Blending Method on the Color and Translucency of Light-cured Composite Resin.

Effect of Nano SiO 2 Particles on the Morphology and Mechanical Properties of POSS Nanocomposite Dental Resins

Computational and Experimental Study of Dental Resin Composites with High Filler Content

Effects of Three Different Nanometer Particles on Mechanical Properties of Dental FRC Posts Matrix Resin

Microstructure and Mechanical Properties of Nano-Tio2 Reinforced Dental Composite Resin

Synthesis of Nanodiamond Reinforced Dental Composite Resins and Their Mechanical Properties

Study on Micro-Structure of the Nano Enforced Dental Composite Resin

Flexural Strength of Dental Resin with Differently Made Diamonds

Influences of silica size distribution on the performance of dental composite

Effects of the proportion of nano-diamond and zirconia on the color of core resin

Design of Resin Composites with Enhanced Physical–mechanical Properties

The Influence of Different Fillers on the Properties of Carbon-Matrix Composites

[Research of Changes in the Mechanical Properties and Curability of Composite Core Materials Modified with Ultrafine Diamond].

Effect of Nanofiller on Wear Resistance and Surface Roughness of Resin Composites.

Effect of Nano-Vanadium Nitride on Microstructure and Properties of Sintered Fe-Cu-based Diamond Composites