Abstract:Purpose: Mechanical properties of dental composite resins need to be improved in order to enhance their performance for applications in direct restorations. Application of nanoparticles in this field is a recent development. The aim of this study was to investigate the mechanical properties of experimental composites containing various mass fractions of silica nanoparticles. Materials and methods: Experimental composites were composed of a visible-light-curing monomer mixture (70 wt% Bis-GMA and 30 wt% TEGDMA) and silica nanoparticles of a size ranging from 20 nm to 50 nm modified with gamma-methacryloxy propyl trimethoxy silane (gamma-MPS) as reinforcing filler. The composites were classified into four groups according to their filler mass fractions ranging from 20% to 50%. Following the same preparation procedure, a conventional composite was also fabricated consisting of a mass percentage of 60% silica fillers having particle sizes ranging from 10 microm to 40 microm in the same organic matrix, which served as control. Ten specimens were prepared of each experimental group and also of the control. Fracture toughness was measured using single-edge notched bend (SENB) specimens. Specimen fracture surfaces were mounted on aluminum stubs with carbon cement, sputter-coated with gold and examined under scanning electron microscopy (SEM). Flexural strength was evaluated through a standard three-point bending test and Vickers microhardness test was performed to investigate the hardness of the samples. Results: Filler mass fraction had a significant effect on composite properties. Fracture toughness, flexural strength, and hardness of composites at filler mass fraction of 40% of silica nanoparticles were (mean +/- SD) 1.43 +/- 0.08 MPa.m(1/2), 149.74 +/- 8.14 MPa, and 62.12 +/- 3.07 VHN, respectively; relevant values for composites at 50% mass fraction of silica nanoparticles were 1.38 +/- 0.07 MPa.m(1/2), 122.83 +/- 6.13 MPa, and 70.69 +/- 3.67 VHN, respectively, all of which were significantly higher than 1.07 +/- 0.06 MPa.m(1/2), 104.61 +/- 8.73 MPa, and 52.14 +/- 4.02 VHN of the control, respectively (Tukey's multiple comparison test; family confidence coefficient = 0.95). Measured values for composites at 20% mass fraction of silica nanoparticles were 0.94 +/- 0.06 MPa.m(1/2), 103.41 +/- 7.62 MPa, and 42.87 +/- 2.61 VHN, respectively; relevant values for composites at 30% mass fraction of silica nanoparticles were 1.16 +/- 0.07 MPa.m(1/2), 127.91 +/- 7.05 MPa, and 51.78 +/- 3.41 VHN, respectively. Conclusions: Reinforcement of dental composite resins with silica nanoparticles resulted in a significant increase in the evaluated mechanical properties in comparison with the conventional composite. The filler mass fraction played a critical role in determining the composite's mechanical properties.

Microstructure and Mechanical Properties of Nano-Tio2 Reinforced Dental Composite Resin

Study on Micro-Structure of the Nano Enforced Dental Composite Resin

Nanoparticle-reinforced Resin-Based Dental Composites.

Fabrication and Evaluation of Light-Curing Nanocomposite Resins Filled with Surface-Modified TiO2 Nanoparticles for Dental Application

Effect of Nano SiO 2 Particles on the Morphology and Mechanical Properties of POSS Nanocomposite Dental Resins

Effects of Nano-TiO2 Filler By Physical Blending Method on the Color and Translucency of Light-cured Composite Resin.

[Surface Modification and Microstructure of Single-Walled Carbon Nanotubes for Dental Composite Resin].

Nanoindentation Study on Mechanical Properties of Nano-SiO2/Dental Resin Composites

The researchment of nami-material reinfoced dental composite resin

Evaluation of Micro-Tensile Bond Strength of Fibre Post with Titanium Dioxide Nanoparticles as Fillers in Experimental Dental Composite Resin

Effects of Three Different Nanometer Particles on Mechanical Properties of Dental FRC Posts Matrix Resin

Effect of the Amount of Silane Coupling Agent γ-MPS on Properties of ZrO2-SiO2 Based Dental Resin Composites

Investigation of mechanical properties of experimental Bis-GMA/TEGDMA dental composite resins containing various mass fractions of silica nanoparticles

Titanium/nanodiamond Nanocomposites: Effect of Nanodiamond on Microstructure and Mechanical Properties of Titanium

[Mechanical and light-activated antibacterial properties of resin filled with Ag-TiO2 nanoparticles].

Effects of Titanium Dioxide Nanoparticles on the Mechanical Strength of Epoxy Hybrid Composite Materials Reinforced with Unidirectional Carbon and Glass Fibers.

In-situ construction of the nanostructured TiO 2 /TiN composite films by induction heat treatment: Improved mechanical, corrosion, and biological properties

Molecular dynamics investigation of structural and mechanical properties of silica nanorod reinforced dental resin composites

Affects of nano-diamond contained filler on the compressive strength and microhardness of composite resin

Synergic Effect of TiO2 Filler on the Mechanical Properties of Polymer Nanocomposites

Preparation and study of PMMA/TiO2 nanocomposites