Abstract:Hybrid membranes formed by blending TiO2 nanoparticles and organic materials are attractive for creating new materials with enhanced properties such as high permselectivity, good hydrophilicity and excellent fouling resistance in a wide range of applications. In order to overcome the agglomeration of nanoparticles in membranes and leakage of nanoparticles from nanocomposite membranes in the water treatment process and enhance the hydrophilicity of membranes, polymer chains of HEMA (2-hydroxyethyl methacrylate) were grown from TiO2 by the atom transfer radical polymerization (ATRP) process in methanol. The hybrid polysulfone (PSF) membranes were then prepared by adding different ratios of TiO2 (T membranes) and TiO2-g-HEMA (HT membranes) particles via phase inversion induced by the immersion precipitation technique. The modification nanoparticles were found to provide obvious improvements in reducing the particles agglomeration and fouling in sheet membranes. Different techniques such as SEM, TEM, FTIR, EDS, contact angle goniometry and filtration experiments of water, BSA and EPS were applied to characterize and explore the performance of particles and membranes. Compared with unmodified TiO2 particles, modified TiO2 particles held enhanced hydrophilicity, better compatibility and dispersibility in organic solvent and matrix polymer. Similarly, the HT membranes exhibited superior water flux and anti-pollution performance in separation than the pure PSF membrane and T membranes.

Study on Modification of Hydrophobic Polysulfone Membrane

PC Technology Improving the Hemocompatibility of Polymer Membranes Developed for Biomedical Application

Improving Hydrophilicity And Protein Resistance Of Poly(Vinylidene Fluoride) Membranes By Blending With Amphiphilic Hyperbranched-Star Polymer

Porous poly(vinylidene fluoride) membrane modified with hyperbranched poly(amine-ester)

Modification of Porous Poly(Vinylidene Fluoride) Membrane Using Amphiphilic Polymers with Different Structures in Phase Inversion Process

Hydrophilic modification of a PSU membrane with block copolymer of PS-b-SBMA

Improving the Hydrophilicity of Poly(vinylidene Fluoride) Porous Membranes by Electron Beam Initiated Surface Grafting of AA/SSS Binary Monomers

Fabrication of Hydrophilic and Sponge-Like PVDF/brush-like Copolymer Blend Membranes Using Triethylphosphate As Solvent

Advances on Hydrophilic Modification of Polytetrafluoroethylene Porous Membrane

Improving the hydrophilicity and fouling-resistance of polysulfone ultrafiltration membranes via surface zwitterionicalization mediated by polysulfone-based triblock copolymer additive

Application of polyethylene oxide and its derivatives in hydrophilic modification of ultrafiltration membranes

An Extending of Candidate for the Hydrophilic Modification of Polysulfone Membranes from the Compatibility Consideration: the Polyethersulfone-Based Amphiphilic Copolymer As an Example

Cytocompatibility of new-type sulfonated polymer surfaces

Novel polysulfone hybrid ultrafiltration membrane prepared with TiO2-g-HEMA and its antifouling characteristics

Modification of chitosan membrane with poly(vinyl alcohol) and biocompatibility evaluation

Improving Hemocompatibility of Polysulfone Membrane by UV-Assisted Grafting of Sulfonated Chitosan

On the surface hydrophilization of a blended polysulfone membrane: atomic force microscopy measurement and molecular dynamics simulation

Polysulfone-based amphiphilic polymer for hydrophilicity and fouling-resistant modification of polyethersulfone membranes

Hydrophilic modification of poly(aryl sulfone) membrane materials toward highly-efficient environmental remediation

ENHANCING HYDROPHILICITY OF POLYSULFONE MEMBRANE SURFACE BY UV IRRADIATION OF DIFFERENT WAVELENGTHS AND BY PEG GRAFTING

STUDY ON HYDROPHILICITY MODIFICATION OF POLY(VINYLIDENE FLUORIDE) HOLLOW FIBER MICROPOROUS MEMBRANES VIA A TWO-STEP GRAFTING POLYMERIZATION