Abstract:Dual fluidized bed (DFB) reactor systems are widely used in gas–solid two-phase flow applications, whose gas–solid flow characteristics have a significant effect on the performance of many kinds of technologies. A numerical simulation model was established on the basis of a large-scale DFB reactor with a maximum height of 21.6 m, and numerical simulations focused on gas–solid flow characteristics were carried out. The effects of the superficial gas velocity of both beds and the static bed height and particle size on the distribution of the pressure and solid suspension density and the solid circulation rate were studied. The simulation results were in good agreement with the experimental data. With the strong support of the experimental data, the gas–solid flow characteristics of large-scale DFB reactors were innovatively evaluated in this numerical simulation study, which effectively makes up for the shortcomings of the current research. The results showed that the superficial gas velocity of both beds and the static bed height have different degrees of influence on the gas–solid flow characteristics. Specifically, for 282 μm particles, when the superficial gas velocity of both beds and the static bed height were 4.5 m/s, 2.5 m/s, and 0.65 m, respectively, under typical working conditions, the bottom pressure of the two furnaces was 3412.42 Pa and 2812.86 Pa, respectively, and the solid suspension density was 409.44 kg/m3 and 427.89 kg/m3, respectively. Based on the simulation results, the empirical formulas of the solid circulation rate were fitted according to different particle sizes. Under similar conditions, the solid circulation rates of particles with a particle size of 100 μm, 282 μm, 641 μm, and 1000 μm were 2.84–13.28, 0.73–4.91, 0.024–0.216, and 0.0026–0.0095 kg/(m2s), respectively. It can be found that the influence of the particle size on the solid circulation rate is the most significant among all parameters.

Circulation Velocity of Fluid in Three-phase Biological Fluidized Bed Reactor with Internal Circulation

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Investigation of Particle Flow Behaviors in a Simplified Downcomer of Multistage Fluidized Bed

CFD Simulation of Internal Flow Field of Three-Phase Fluidized Bed Reactor with Internal Circulation

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

A comparative study on hydrodynamics of circulating fluidized bed riser and downer

Hydrodynamic Behavior of an Internally Circulating Fluidized Bed with Tubular Gas Distributors

Numerical Simulation Study on the Gas–Solid Flow Characteristics of a Large-Scale Dual Fluidized Bed Reactor: Verification and Extension

Effect of superficial gas velocity on solid behaviors in a full-loop CFB

Cocurrent gas-solid downflow fluidized bed (downer) reactors: II hydrodynamics

Experimental Study on Gas–solid Flow and Heat Transfer Characteristics in Downer Moving Bed

Axial Flow Pattern in a Concurrent Downflow Fluidized Bed (downer) with Linearly Variable Superficial Gas Velocity

Relationship between Reactor Performances and Structural Parameters of Inner-loop Three-phase Fluidized Bed

Volumetric Mass Transfer Coefficient of Oxygen in an Internal Loop Airlift Reactor with A Convergence-Divergence Draft Tube

Study on three-phase Newtonian fluid in an internal loop airlift reactor with a convergence-divergence draft tube

Particle Distribution and Pressure Drop in a Horizontal Two-Pass Liquid–solid Circulating Fluidized Bed Heat Exchanger

Solids flow characteristics and circulation rate in an internally circulating fluidized bed

HYDRODYNAMICS AND MASS TRANSFER OF TRIPLET LOOP BIOLOGICAL FLUIDIZED BED

Hydraulic characteristics of internal loop fluidized bed with baffle setting on bottom