Abstract:Great length, large weight and other factors may cause difficulty in measuring the profile accuracy of the double-headed screw rotor. To solve this problem, an on-machine measuring system based on a laser-displacement sensor (LDS) was designed and implemented in this paper by taking an LXK100 four-axis whirlwind milling machine as the carrier. To improve the measurement accuracy of the system, the generalized variable-structural-element morphological method, polynomial interpolation algorithm and ellipse fitting method were first combined to realize the rapid subpixel centroid extraction from a noise-containing spot image, thus improving the data acquisition accuracy of the LDS, and then the hybrid method was experimentally verified. Next, a wavelet threshold function with high-order differentiability and adaptive wavelet coefficient contractility was constructed based on the hyperbolic tangent function, so as to inhibit the disturbance from random errors and preserve real profile information, and this method was simulated and verified. Subsequently, a smoothing algorithm for point cloud data was proposed based on the Lagrange multiplier method to avoid the defect of the piecewise curve-fitting method, that is, function continuity and differentiability could not be satisfied at piecewise points. Finally, the profile accuracy was calculated in real time according to the data reconstruction result and the machining quality was judged. The measurement experiment of the double-headed screw rotor indicates that the proposed on-machine measuring system can complete the profile accuracy measurement for a screw pitch within 39.7 s with measurement accuracy reaching ±8 μm, and the measurement uncertainties of the major axis, minor axis and screw pitch are 0.72 μm, 0.69 μm and 1.24 μm, respectively. Therefore, the measurement accuracy and efficiency are both remarkably improved.

Research on the Part Dimensions of Double-path Laser-CCD Dynamic Measuring System

Measuring Straightness Method with Common Path Compensation for Laser Drift

A High-Precision Laser Displacement Measurement System

Simultaneous Measuring Method Of Linear Guide Geometric Errors In Four-Degrees Of Freedom

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

Distance Measuring Using Single-Point Laser Triangulation System Design Based on CMOS

Machining Precision Online Measurement of Large Span Pin Hole Using Structured Light

Research on CCD-based microscopic measuring for precision part geometry error

Embedded displacement measuring device based on error separating technique of multi-circle overlapping three-probe method

Error identification and compensation for a laser displacement sensor based on on-machine measurement

Thickness Measurement of Rotary Parts with Double Laser under Unknown Relative Position Condition

&Lt;title>ccd-Based Microscopic Measurement System for Precision Part Geometry Error</title>

Study on some key technique of large scale laser measuring machine

A Laser-Based On-Machine Measuring System for Profile Accuracy of Double-Headed Screw Rotor

A Quality Improvement Method for Complex Component Fine Manufacturing Based on Terminal Laser Beam Deflection Compensation

High-accuracy Measurement of Dimensional Minichanges of Large-Size Components with Laser Interferometry

Measurement and Compensation of Volumetric Positioning Errors for CNC Machines

Automatic System to Measure Mechanical Parts Based on Edge Detection

Delay Error and Compensation in Measurement of Micro-Scale Using Aiming and Triggering Method

Design of a high-precision and non-contact dynamic angular displacement measurement with dual-Laser Doppler Vibrometers