Abstract:The high chromium cast irons (HCCIs) with rare earth (RE) nanoparticles or inoculants were fabricated in the casting process. The phase compositions and microstructure were analyzed by X-ray diffraction (XRD) and optical microscopy (OM), respectively. The hardness and impact toughness were tested by Rockwel-hardmeter and impacting test enginery. And then, the morphology of fracture was researched by scanning electron microscopy (SEM). The results demonstrated that the phase compositions of HCCIs with addition of RE nanoparticles or inoculants which were M7C3 carbides + alpha-Fe did not change obviously. However, the prime M7C3 carbides morphology had great changes with the increase of RE nanoparticles, which changed from long lath to granular or island shape. When the content of RE nanoparticles was 0.4 wt.%, the microstructure of high chromium cast iron was refined greatly. The microstructure of carbides was coarser when the addition of RE nanoparticles was higher than 0.4 wt.%. The hardness and impact toughness of HCCIs were improved by addition of RE nanoparticles or inoculants. The impact toughness of HCCIs was increased 36.4% with RE nanoparticles of 0.4 wt.%, but the hardness changed slightly. In addition, the adding of RE nanoparticles or inoculants could reduce the degree of the brittle fracture. Fracture never seemed regular, instead, containing lots of laminates and dimples with the increase of the RE nanoparticles. The results also indicated that the optimal addition amount of the RE nanoparticles was 0.4%, under this composition, the microstructure and mechanical property achieved the best cooperation. In addition, through the study of erosion wear rate, when adding 0.4% RE nanoparticles into the HCCIs, the erosion wear rate got the minimum 0.32x10(-3) g/mm(2), which could increase 51.5% compared with that without any RE nanoparticles.

Influences of Si/C Ratio and Speed of Cooling on the Structure and Properties of Medium-chromium Cast Iron As-cast

Influence of Cooling Velocity on the Structure and Property of Medium-Chromium Cast Iron

Influences of Ni/Cu/Cr3C2 Composite Additive on Microstructure and Properties of WC–10Co Fine Grained Hardmetal

Influence of Tungsten on Microstructure and Properties of As-Cast Hi-Cr Cast Iron

Effect of quenching temperature on microstructure and properties of multivariate high chromium cast iron

Influences of Pouring Temperature and Cooling Rate on Microstructure and Mechanical Properties of Casting Al-Si-Cu Aluminum Alloy

Characterization of Microstructure and Mechanical Properties of High Chromium Cast Irons Using Sem and Nanoindentation

Effects of Quenching Medium on Microstructure and Mechanical Properties of High Chromium Cast Iron

Effect of quenching temperature on microstructure and properties of low silicon hypereutectic high chromium cast iron

Influence of Carbide Morphology in High-Chromium Cast on the Mechanical Performance

Effect of Si on Microstructure and Wear Resistance of Hypereutectic High-Chromium Cast Iron

Effect of Carbon and Cooling Rate on the Structure of Hypereutectic High Chromium Cast Iron in the Cast State and after Heat Treatment

Normalizing Temperature Influence on the Microstructure Characteristics, Mechanical and Wear Performance of a Novel High Chromium Cast Iron

Microstructure evolution of heavy section ductile iron

Influence of Cu on Properties of High Strength Ductile Cast Iron

Effect of Chromium on Microstructure and Properties of High Boron White Cast Iron

Effect of tempering temperature on microstructure and properties of low silicon hypereutectic high chromium cast ironAuswirkung der Anlasstemperatur auf das Gefüge und die Eigenschaften von übereutektischem Gusseisen mit niedrigem Siliziumgehalt und hohem Chromgehalt

Influence of Rare Earth Nanoparticles and Inoculants on Performance and Microstructure of High Chromium Cast Iron

Preparation of Semisolid Hypereutectic High Chromium Cast Iron and Quantitative Analysis of Microstructure

Tempering temperature dependence on the microstructure, mechanical properties and wear behaviour of a novel high chromium cast iron