Abstract:The authors propose a double-layer composite straight beam model that incorporates the Euler beam theory and the state space method to account for the nonlinear interaction between concrete core,cement soil,and surrounding soil interfaces.This model allows for convenient derivation of general solutions for internal forces and deformations for different combinations of piles in layered soil.By employing the state space method,the model effectively considers soil-structure interactions and variations in local structural parameters when analyzing composite piles.To validate the proposed solution,field test results and numerical analysis findings from existing literature are compared.The obtained analytical solution aligns well with these validation sources.Additionally,using the derived analytical solution,the authors investigate the effects of various pile parameters on pile loading responses.Specifically,they analyze the impacts of pile diameter ratio,core length ratio,and Young's modulus of the cement soil.The results indicate that increasing the diameter ratio reduces pile settlement and increases pile bearing capacity due to enhanced total side friction resistance and tip resistances.Increasing the core length ratio also leads to higher pile bearing capacity with an increasing growth rate.However,the Young's modulus of the cement soil has a negligible influence on pile bearing capacity.

The Analysis of Bearing-beam of Piles Under the Interaction of Pile-soil

Dynamic torsional response of an end bearing pile in saturated poroelastic medium

ANALYTICAL THEORY OF LATERAL VIBRATION OF SINGLE PILE IN VISCO-ELASTIC SUBGRADE CONSIDERING SHEAR DEFORMATION

An Analytical Solution for Lateral Vibration of a Pile with Finite Length Pile in Viscoelastic Subgrade

Analytical Solutions for Lateral Vibration of Pile in Layered Soils Considering Shear Deformation

Model Test Study of Bearing Behavior of Small Prefabricated Piles in Soft Soil Area

Analytical Elastoplastic Solutions of Laterally Loaded Long Piles

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

FINITE ELEMENT ANALYSIS OF BEARING CAPACITY OF A SINGLE DX PILE

Analysis of effected factors for vertical compressive bearing capacity of ribbed bamboo joint pile

Analytical Approach to Axially Loaded Concrete Core-Cement Soil Composite Pile

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

Bearing Behaviors of Self-Balanced Pile

Analysis of Axial Load-Transfer of Large-Diameter Cast-in-situ Tubular Pile

ANALYSIS ON BEARING CAPACITY OF DIVING DRY-VIBRATION COMPACTION STONE PILES

RESEARCH ON INFLUENCE OF SOIL CORE ON BEARING CHARACTER OF LARGE-DIAMETER TUBULAR PILE USING CAST-IN-SITU CONCRETE

FINITE ELEMENT ANALYSIS OF BEARING CAPACITY PROPERTIES FOR RAMMED ENLARGED COMPOSITE BEARER PILES

The Behaviour of Single Piles under Axially and Laterally Loads

Finite Element Analyses of Bearing Performance of Energy Pile Based on TTS Model

A test on base bearing capacity of static drill rooted nodular pile