Abstract:The rigid pile composite foundation is widely used in highway projects in soft soil area as it can effectively increase the bearing capacity and stability of the foundation. While the research on the behavior and failure mode of rigid pile composite foundation under embankment is not enough, instability failure of rigid pile composite foundation often occurs in practical projects. This paper presents a centrifuge model test to investigate the load transfer mechanism, settlement characteristic and failure mode of rigid pile composite foundation under embankment. The test results show that: the soil displacement of different region in rigid pile composite foundation was different, obvious vertical displacement occurred in the soil under the center of embankment and the horizontal displacement was very small in this region; both vertical and horizontal displacement occurred in the soil under the shoulder of embankment; and obvious horizontal displacement occurred in the soil under the slope toe of embankment; moreover, ground heave also occurred near the slope toe of embankment. The soil displacement in rigid pile composite foundation had a large influence on the stress characteristic and failure mode of rigid piles, the compressive failure and bending failure would probably occur for the piles under the center and shoulder of the embankment, respectively, and the tension-bending failure would probably occur for the piles under the slope toe of embankment. The different failure modes of piles at different regions should be considered in the design of rigid pile composite foundation under embankment. The test results can be used to improve the design method for rigid pile composite foundation under embankment in practical projects.

FINITE ELEMENT ANALYSIS OF BEARING CAPACITY PROPERTIES FOR RAMMED ENLARGED COMPOSITE BEARER PILES

ESTABLISHMENT OF THREE DIMENSIONAL COMPOSITE MODEL AND ITS APPLICATION TO COMPOSITE FOUNDATION WITH GRANULAR PILES

THE CRITICAL EDGE LOAD OF COMPOSITE GROUND REINFORCED BY STONE COLUMNS UNDER RIGID FOUNDATION

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

Finite Element Analysis of Deformation Characteristics of Composite Foundation with Rigid-Flexible Piles

STUDY ON VERTICAL BEARING CAPACITY OF LARGE-DIAMETER CAST-IN-SITU THIN-WALL TUBULAR PILE

Study On Characteristics Comparison Between Rigid Pile In Composite Foundation With Rigid-Flexible Piles And That In Free State

Test Research on the Behavior of Composite Foundations Incorporating Rigid and Flexible Piles

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Finite Element Analysis of Rigid-Soft Composite Pile Foundation

FINITE ELEMENT ANALYSIS OF BEARING CAPACITY OF A SINGLE DX PILE

Analysis of effected factors for vertical compressive bearing capacity of ribbed bamboo joint pile

A test on base bearing capacity of static drill rooted nodular pile

Centrifuge Study on Behavior of Rigid Pile Composite Foundation under Embankment in Soft Soil

Analysis of stress and failure mechanism on composite foundation improved by rigid piles under flexible foundation considering damage of piles

Engineering Characteristics Of Composite Foundation With Rigid-Flexible And Long-Short Piles

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

Finite Element Analysis of Compacting Displacements of Single Jacked Pile

Experimental Study Of The Rigid-Flexible Pile Composite Foundation

Stability of composite foundation improved by rigid piles under embankment considering different failure modes of piles

Centrifugal Model Tests on Working Behavior of Composite Foundation Reinforced by Rigid Piles with Caps Under Embankment