Abstract:Displacement piles are driven to support a wide range of structures. However, analysis of the stress and strain fields developed during their installation remains one of the most challenging problems in geotechnical engineering. Advances in design methods, particularly for sand sites, have had to rely on an imperfect analogy between pile and cone penetration test (CPT), rather than modeling pile installation itself. Recent physical model experiments have provided benchmark data sets that describe the stress and deformation patterns developed around displacement piles penetrating sand masses. Following from large-deformation finite-element analyses that captured the stresses measured in the Grenoble 3S-R calibration chamber NE34 sand experiments, this paper presents simulations of the displacements measured in equivalent high-quality experiments conducted at Purdue University with dense, angular #2Q-ROK silica sand. A modified Mohr-Coulomb model with state-dependent parameters was calibrated to match element tests conducted by the authors, and an arbitrary Lagrangian-Eulerian scheme was applied in the simulations. The evolution and distribution of the deformations induced by pile penetration are compared with the experiments. Predictions for the deformation and strain fields applying during and after pile installation are presented, showing broad agreement between the simulations and experiments. The predicted and measured pile capacities are also compared and contrasted. Points of divergence between the simulations and tests are highlighted and their implications for numerical modeling are discussed.

Finite Element Analysis of Compacting Displacements of Single Jacked Pile

Large Deformation Finite-Element Simulation of Displacement-Pile Installation Experiments in Sand

Large Deformation Analysis of Intermittent Pile Penetration into Dense Sand Incorporating a State Dependent Mohr–Coulomb Model

Large-Deformation Finite-Element Simulation of Deformation and Strain Fields Resulting from Closed-End Displacement Pile Installation in Sand

DEM Study of the Stress Fields Around the Closed-Ended Displacement Pile Driven in Sand

Numerical Simulation and Factor Analysis of Jacked Pile Compacting Effects

COMPARATIVE STUDY OF DYNAMIC SIMULATION FOR COMPACTING DISPLACEMENT OF JACKED PILE AND IN-SITU TEST

Squeezing Effects Of Jacked Pile In Layered Soil

3-D Numerical Simulation for Large-Diameter Cast-<i>In Situ</i> Tubular Pile

STUDY OF COMPACTING SOIL DISPLACEMENTS AROUND JACKED SINGLE PILE BASED ON EXCESS PORE PRESSURE DISSIPATION

3-D Numerical Simulation for Large-Diameter Cast-In-Situ Tubular Pile

Finite Element Analysis of Deformation Characteristics of Composite Foundation with Rigid-Flexible Piles

Analytical Elastoplastic Solutions of Laterally Loaded Long Piles

Settlement of composite ground reinforced by deformable piles

Soil Displacements Around Jacked Group Piles Based on Construction Sequence and Compacting Effects

Displacement and Force Analyses of Piles in the Pile-Caisson Composite Structure under Eccentric Inclined Loading Considering Different Stratum Features

Squeezing Effects of Jacked Pile Considering Static Pile Press Machine's Action

A Large Deformation Finite Element Investigation of Pile Group Installations with Consideration of Intervening Consolidation

Dynamic Impedances and Free-Field Vibration Analysis of Pile Groups in Saturated Ground

Behavior Analysis of Laterally Loaded Single Pile under Large Deflection

Research On Settlement Calculation Method Of Composite Foundation Of Discrete Material Piles