Abstract:Recent decades have seen a growing concern about ever-increasing green house gas (GHG) emissions and depletion of fossil fuels. Polygeneration, a multi-input multi-output energy system, provides huge opportunities to tackle these problems due to its superior performances over conventional energy systems in terms of energy conversion efficiency and GHG emissions. Many approaches have been made in process design and analysis of polygeneration energy systems, but most of them focus on using coal gasification as the only way to provide gas for downstream utilization. Coke oven gas, another gas source with huge capacity, however, has not received enough attention in polygeneration process design, and researches in this field are still rather limited. In this paper, we present a dual-gas sourced polygeneration process design which uses both gasification gas and coke oven gas and produces methanol, dimethyl ether (DME), and dimethyl carbonate (DMC) in an integrated catalysis procedure. Gasification gas and coke oven gas are converted to synthesis gas, or syngas, via a catalytic reforming procedure, where the ratio between carbon monoxide and hydrogen in the syngas is carefully adjusted according to specific requirements of downstream chemical synthesis reactions. An integrated catalysis procedure follows, where DME is synthesized from the fresh syngas first, unconverted syngas is then sent to a methanol synthesis unit to produce methanol, and part of the methanol is further converted to DMC in a DMC synthesis unit. Based on the proposed process design, an exergoeconomic analysis and an exergy cost distribution diagram are presented, from which the production cost of a product over each functional block of the process can be easily obtained. Analysis results show that the largest exergy loss occurs in an exothermic reformer, accounting 60.4 percent of the total exergy loss. The exergy cost distribution diagram indicates that DMC has the highest exergy cost, followed by DME and methanol, and it is economically favorable to use the exhaust gas from the chemical synthesis block for power generation.

Design and analysis of a new DME production process with power cogeneration

A dual-gas sourced integrated methanol/DME/DMC catalysis approach to polygeneration energy systems design and an exergoeconomic analysis

Techno-Economic Analysis of Methanol to Propylene Process

Design and Analysis of a New Dimethyl Ether- Electric Power Polygeneration System

Co-Production of Dimethyl Carbonate, Dimethoxymethane and Dimethyl Ether from Methanol: Process Design and Exergy Analysis

Study on Several Versions of Dimethyl Ether Production for Resolving the Natural Gas Utilization Problem in China

Technical and Economic Analysis of Some Dimethyl Ether Production Technologies

Research on DME-power co-generation from coal gas and coke-oven gas

Study on co-feed and co-production system based on coal and natural gas for producing DME and electricity

Process Simulation of Single-Step Dimethyl Ether Production Via Biomass Gasification.

How to make the production of methanol/DME “GREENER“—Integration of wind power with modern coal chemical industry

How to make the production of Methanol/DME "GREENER"-The integration of wind power with coal chemical industry

Process design and downstream optimization of the direct synthesis route for cleaner production of dimethyl ether from biogas

Simulation and exergoeconomic analysis of a dual-gas sourced polygeneration process with integrated methanol/DME/DMC catalytic synthesis

Conceptual Design and Techno-economic Analysis of a Coal to Methanol and Ethylene Glycol Cogeneration Process with Low Carbon Emission and High Efficiency

Integrated Energy-Exergy-Based Evaluation and Optimization of A Bio-Dimethyl Ether Production System Via Entrained Flow Gasification

Study On Systems Based On Coal And Natural Gas For Producing Dimethyl Ether

Process Simulation and Optimization of One-Step Synthesis of Dimethyl Ether from Syngas

Techno-economic assessment of renewable dimethyl ether production pathways from hydrogen and carbon dioxide in the context of power-to-X

Modeling and Simulation of Production Process on Dimethyl Ether Synthesized from Coal-based Syngas by One-step Method

A novel power, DME, and ammonia polygeneration system using Aspen plus based on the integration of biomass gasification and syngas chemical looping