Abstract:Recent decades have seen a growing concern about ever-increasing green house gas (GHG) emissions and depletion of fossil fuels. Polygeneration, a multi-input multi-output energy system, provides huge opportunities to tackle these problems due to its superior performances over conventional energy systems in terms of energy conversion efficiency and GHG emissions. Many approaches have been made in process design and analysis of polygeneration energy systems, but most of them focus on using coal gasification as the only way to provide gas for downstream utilization. Coke oven gas, another gas source with huge capacity, however, has not received enough attention in polygeneration process design, and researches in this field are still rather limited. In this paper, we present a dual-gas sourced polygeneration process design which uses both gasification gas and coke oven gas and produces methanol, dimethyl ether (DME), and dimethyl carbonate (DMC) in an integrated catalysis procedure. Gasification gas and coke oven gas are converted to synthesis gas, or syngas, via a catalytic reforming procedure, where the ratio between carbon monoxide and hydrogen in the syngas is carefully adjusted according to specific requirements of downstream chemical synthesis reactions. An integrated catalysis procedure follows, where DME is synthesized from the fresh syngas first, unconverted syngas is then sent to a methanol synthesis unit to produce methanol, and part of the methanol is further converted to DMC in a DMC synthesis unit. Based on the proposed process design, an exergoeconomic analysis and an exergy cost distribution diagram are presented, from which the production cost of a product over each functional block of the process can be easily obtained. Analysis results show that the largest exergy loss occurs in an exothermic reformer, accounting 60.4 percent of the total exergy loss. The exergy cost distribution diagram indicates that DMC has the highest exergy cost, followed by DME and methanol, and it is economically favorable to use the exhaust gas from the chemical synthesis block for power generation.

Techno-economic assessment of renewable dimethyl ether production pathways from hydrogen and carbon dioxide in the context of power-to-X

Techno-Economic Assessment of the Integration of Direct Air Capture and the Production of Solar Fuels

Entrained flow gasification-based biomass-to-X processes: A techno-economic assessment

Process design and downstream optimization of the direct synthesis route for cleaner production of dimethyl ether from biogas

Techno-economic assessment of hydrogen production via dimethylether steam reforming and methanol steam reforming

Integrated CO 2 capture and conversion into methanol units: Assessing techno-economic and environmental aspects compared to CO 2 into SNG alternative

CO2-to-methanol: Economic and environmental comparison of emerging and established technologies with dry reforming and methane pyrolysis

Conceptual Process Design and Technoeconomic Analysis of an e-Methanol Plant with Direct Air-Captured CO 2 and Electrolytic H 2

A dual-gas sourced integrated methanol/DME/DMC catalysis approach to polygeneration energy systems design and an exergoeconomic analysis

Process Simulation and Environmental Aspects of Dimethyl Ether Production from Digestate-Derived Syngas

Design and analysis of a new DME production process with power cogeneration

Optimizing hydrogen and e-methanol production through Power-to-X integration in biogas plants

Beyond Ethanol: a Techno‐economic Analysis of an Integrated Corn Biorefinery for the Production of Hydrocarbon Fuels and Chemicals

A novel energy-efficient process of converting CO2 to dimethyl ether with techno-economic and environmental evaluation

COST COMPARISON OF DIMETHYL ETHER (DME) VIA MULTIPLE COAL DERIVED PATHWAYS

A techno-economic and environmental evaluation of the integration of direct air capture with hydrogen derivatives production

Simulation and exergoeconomic analysis of a dual-gas sourced polygeneration process with integrated methanol/DME/DMC catalytic synthesis

Power-to-liquid versus biomass-derived kerosene: a comparative study

Towards a sustainable, and economic production future: Proposing a new process for methanol production based on renewable hydrogen

Remote Renewable Hubs for Carbon-Neutral Synthetic Fuel Production

Feasibility Study of Renewable E-Methanol Production: A Substitution Pathway from Blue to Green