Research Progress of Trivalent Chrome Passivation on Zinc Plating

陈锦虹,任艳萍,卢锦堂,许乔瑜,孔纲

DOI: https://doi.org/10.3969/j.issn.1001-1560.2004.11.013

2004-01-01

Abstract:Mechanisms of trivalent chrome passivation for zinc plating were reviewed as well as its research progress at home and abroad. All research findings have higher reference and practical value for replacing of toxic Cr(Ⅵ) passivation.

What problem does this paper attempt to address?

Research Status of Trivalent Chromium Passivation for Zinc Coatings

Gang Kong

2013-01-01

Abstract:The development history and current research status of trivalent chromium passivation for zinc coating were reviewed. The state of the art of sealing for trivalent chromium passivation film was emphatically introduced. It’s pointed out that the main development direction of trivalent chromium passivation is to find out suitable sealing agents and processes, with the existing non-chromium passivation technology as a reference.
Research Advances of Trivalent Chromium Black Passivation Process

柯昌美,周黎琴,胡永,王全全,张金龙,汪振忠

2011-01-01

Abstract:Based on references from abroad and home, the main composition and mechanism of trilent chromium solution, as well as film properties and characteristics are reported firstly. Some typical trivalent chromium black passivation technologies are introduced systemically. As hexavalent chromium is a high toxicity material, the trivalent chromium black passivation with non-chromate passivation should be widely investigated together in order to replace hexavalent black passivation.
PROGRESS OF NON-CHROME PASSIVATION FOR ZINC COATING

陈锦虹,卢锦堂,许乔瑜,孔纲,眭润舟

DOI: https://doi.org/10.3969/j.issn.1002-6495.2003.05.007

2003-01-01

Abstract:Progress of non-chrome passivation for zinc coating is summarized.The recent status of research of inorganic and organic non-cromate passivation is introduced separately.Some suggestions are presented for further study on chromate-free protective coatings.
Progress in Research of Chromate-free Passivation of Zinc and Zinc Alloy Galvanized Steel

YAN Lei,ZHANG Ying-jie,FAN Yu-ying

DOI: https://doi.org/10.3969/j.issn.1000-4742.2007.05.001

2007-01-01

Abstract:Progress of chromate-free passivation of zinc or zinc alloy galvanized steel is summarized,focusing on several chromate-free passivation processes of zinc plated steel by inorganic and organic agents.The developing tendency of chromate-free passivation techniques is overcasted.It is also pointed that silicate passivation film will be one of the main researching objects,which will replace current traditional chromate passivation because it is non-toxic and environment-friendly,highly corrosion resistant and lower in cost.
Advances in Research on Chromate-free Passivation for Zinc Coating

Kang Ju,Han Lihua,Liang Yinghua

DOI: https://doi.org/10.3969/j.issn.1004-017X.2008.06.005

2008-01-01

Abstract:The development and features of chromate-free passivation for Zinc coating are summarized. Point out that as the environmental protection become stricter, future research in Zinc coating passivation will focus on the transition from chromate passivation to low toxicity or non-toxicity passivators, especially molybdate passivation, organic passivation and the mixing passivation of organic and inorganic will have a better application foreground.
Study of Trivalent Chromium Bright Blue Passivation for Zinc Coating

DU Ya-nan,BI Si-fu,TU Zhen-mi,LI Ning

DOI: https://doi.org/10.3969/j.issn.1000-4742.2007.01.006

2007-01-01

Abstract:Trivalent chromium passivation technology causes less pollution on environment,but compared with chrome passivation,its bath composition is more complicated, and the corrosion resistance of its passivation film is still poorer.For this reason,the effects of process parameters on the morphology and corrosion resistance of the passivation film are investigated,and a simpler trivalent chromium bright blue passivation technology for zinc coating is obtained.The passivation film has excellent corrosion resistance,and no white rust is found on the passivated zinc coating after 84 h of neutral salt spraying test.
Advances in Research on Unchromium Passivation of Galvanized Zinc Layer

En–Hou Han

2003-01-01

Abstract:The article reviews progress in unchromium passivation of galvanized zinc layer,and points out that as environmental protection requirements become ever stricter,future research in galvanized zinc layer passivation will focus on the transition from chromate passivators to low toxicity passivators. These research results will offer some help to researchers in this area.
Review on effects of components in passivation bath on trivalent chromium passivation of zinc coating

Yi-hui SHI,De-yu LI,Ning LI

DOI: https://doi.org/10.19289/j.1004-227x.2017.21.010

2017-01-01

Abstract:The film formation process and mechanism of trivalent chromium passivation on zinc coating were introduced. The effects of oxidant, complexant, film forming agent, other metal salts and sealant in passivation bath on trivalent chromium passivation on zinc coating and related research status were reviewed. The industrialization situation of trivalent chromium passivation was summarized. The development directions of trivalent chromium passivation were prospected.
Progress in Research on Chromium-Free Passivation of Galvanized Wares

章江洪,张英杰,闫磊,闫宇星

DOI: https://doi.org/10.16577/j.cnki.42-1215/tb.2009.03.014

2009-01-01

Abstract:A review is provided of the progress in research of chromium-free passivation of galvanized wares. It has been point-ed out galvanized wares usually have poor unsatisfactory corrosion resistance,thus it is imperative to conduct Cr-free passivation for galvanized wares so as to improve the corrosion resistance and get rid of pollution to environment by Cr. Moreover,suggestions have also been made with respect to future study of Cr-free passivation of galvanized wares.
Study on Trivalent Chromium Iridescent Passivation Process for Zinc Coating

ZHANG Jing-shuang,SHEN Shui-yun,YANG Guo-qiang,TU Zhen-mi,LI Ning

DOI: https://doi.org/10.3969/j.issn.1000-4742.2007.02.010

2007-01-01

Abstract:A new trivalent chromium iridescent passivation process for zinc coating is developed through probing test,orthogonal experiment and single-factor test.The iridescent passivation film is also tested by Tafel curve test,impedance measurement and corrosion current test and neutral salt spray test.The experimental results show that the iridescent passivation film has a good corrosion resistance,which can withstand 96 hours of neutral salt spray test without white rust.
Chromium-Free Passivating Technology for Zinc Plating

孙克宁,刘兰毅,石伟,李敏,孙福民,胡平

DOI: https://doi.org/10.3969/j.issn.1001-1560.2002.12.013

2002-01-01

Abstract:A chromium-free passivating technology for zinc plating was developed, and the effects of passivating solution and process conditions on the passivation film were studied. Results showed that the passivation film reached (GB) grade 5 after 24 hours white rust resistance test and 72 hours neutral salt spraying test.
Trivalent Chromium Passivation Process for Zinc Coating

He Sheng-chao

Abstract:Zinc coatings were passivated under different pH value,temperature and processing time by using a modified trivalent chromium solution with the addition of oxidant and chelating agent.The effect of processing parameters on the corrosion resistance of passivated zinc coating was determined in 50g/L NaCl solution soaking test.The results show that the corrosion resistance of zinc coating was improved obviously after the modified trivalent chromium solution passivation.There was no white rust on the coating after 168 hours soaking test,which is equivalent with the coating passivated by hexavalent chromium solution.

Materials Science
Trivalent Chromium Black Passivation for Zinc Deposit and Its Influence on Corrosion Resistance

LIU Guo-qin,LI Jin-hua,ZHOU Bao-xue

DOI: https://doi.org/10.3969/j.issn.1000-4742.2009.01.009

2009-01-01

Abstract:Trivalent chromium black passivation with Fe~(2+) and Ni~(2+) as blackening reagents was studied,and the effect of the passivation process on the corrosion resistance and decoration property of the black passivation film was investigated.The results show that passivation-sealing-finishing varnish can significantly improve the corrosion resistance and decoration property of the passivated parts,meeting the requirement for high corrosion resistance.The corrosion resistance and decoration property of the passivated parts can be improved by controlling the temperature,pH value,passivation time and concentration of passivation solution.
Research Development of Non-chromate and Tri-chromium Passivation

YU Yuan-chun,LI Ning,HU Hui-li,ZHANG Jing-shuang,TU Zhen-mi

DOI: https://doi.org/10.3969/j.issn.1001-3660.2005.05.002

2005-01-01

Surface Technology

Abstract:Cr~(6+) chromate passivation has great toxicity with environmental pollution.Non-toxic or low toxic passivation is imperative.At present tri-chrome passivation deals with environmentally acceptable alternatives for Cr~(+6),and non-chromium passivation is the new orientation in environmental protection.The uses of non-chromate passivation,tri-chromium passivation and passivate sealers are expounded.Non-chromate passivation;Tri-chrome passivation;Seal treatment;Corrosion resistance;Research development
Progress of Research on Chromium Plating with Trivalent Chromium Compound

HONG Yan,JI Meng-bo,HE An-guo,WEI Zi-dong

DOI: https://doi.org/10.3969/j.issn.1001-3849.2005.04.005

2005-01-01

Abstract:The removal of impurities in the bath and the hard chromium plating process were discussed. Trivalent chromium plating is highly sensitive to impurities. A trace of impurity would exacerbate the coatings quality down. Usually sedimentation, ion exchange resin and chelater are adopted to remove impurities. The difficulty to get hard chromium coating is another obstacle need to be solved in production. There are two reasons responsible to this difficulty. One is the hydrogen evolution at cathode that leads to the rise of pH value at the cathode, and in turn makes the Cr~(3+) change into a hydroxides, adsorption of which on the substrate results in the trivalent chromium coating non-compact and loose, and prevents the plating from conduction. Then a thick coating cannot be obtained and only soft chromium coating could be expected. Another one of the reasons is related to Cr~(6+), the products of Cr~(3+) oxidation which poisons the plating solution. It is necessary for getting a hard coating to control the pH value of the plating solution or to use a better pH adjustor in the plating bath.
Informations of Cr Plating in Trivalent Chromium Electrolytes

杨防祖,蒋义锋,许书楷,周绍民

DOI: https://doi.org/10.3969/j.issn.1001-3849.2009.08.005

2009-01-01

Abstract:Traditional chromium electroplating is carried out in a plating bath containing hexavalent chromium.Hexavalent chromium is very harmful to environment and human health,therefore,research on trivalent chromium plating has been promoted.Comparing with hexavalent chromium plating,trivalent chromium plating has a lot of advantages.Whereas,there are still some problems need to be solved for wide application of trivalent chromium plating,such as that the bath composition is complicated,the plating process is difficult to maintain and control,it is hard to select anode and not easy to thicken coating,surface appearance of coating is not perfect enough,etc.This paper reviews the development of trivalent chromium plating,introduces the current existing problems,and discusses the solutions of the problems and future developing trends.
Blue-white trivalent chromium passivation process on zinc coating with high corrosion resistance

Liu Ke-gao

Abstract:An environment-friendly trivalent chromium blue-white passivation process for zinc coatings was developed. The effects of bath components such as CrCl3 ·6H2O, Na3C6H5O7 , NaNO3 and cobalt salt, and process parameters including pH and temperature on the appearance and corrosion resistance of passivation coating were studied. The optimal process conditions are as follows: CrCl3·6H2O 48 g/L, NaNO3 20 g/L, Na3C6H5O7 18 g/L, cobalt salt 18 g/L, room temperature, pH 1.5, and passivation time 8 s. The passivation coating obtained under the optimal process conditions is bright and blue-white, uniform, smooth and compact, and has better corrosion resistance than zinc coating.

Engineering,Materials Science
Causes for the Formation of Cr6+in Cr3+ Passivation Film and the Affecting Factors

LIU Guo-qin,LI Jin-hua,ZHOU Bao-xue

DOI: https://doi.org/10.3969/j.issn.1000-4742.2008.03.009

2008-01-01

Abstract:Trace hexavalent chromium will appear in the trivalent chromium passivation film of zinc coating after a period of time in the air.The effects of various parameters(passivation solution temperature,pH value,passivation time,concentration,and ingredients,etc.) on the formation of hexavalent chromium in trivalent chromium passivation film for zinc coating and the causes for the formation are discussed.
Progress in Research of Film-Formation and Anticorrosion Mechanisms of Rare Earth Passivation Coatings on Zinc Substrate

孔纲,吴双,刘玲艳,卢锦堂

DOI: https://doi.org/10.16577/j.cnki.42-1215/tb.2011.11.025

2011-01-01

Abstract:An overview was provided of the research progress about the film-formation and anticorrosion mechanisms of rare earth passivation coatings on Zn substrate.Currently available film - formation and anticorrosion mechanisms of rare earth passivation coatings on Zn substrate,accepted by a majority of scholars at home and abroad,were summarized.Besides,suggestions had been made concerning existing problems and development trend of study on rare earth passivation.
A Study of Non-Chromium Passivating for Zinc Coating

孙克宁,李敏,石伟,胡平

DOI: https://doi.org/10.3969/j.issn.1001-3474.2003.01.001

2003-01-01

Abstract:In order to improve corrosion resistance of zinc coating,it usually use chromate passivation.However,the chromate wastewater heavily pollutes the water source and environment,the chromates are prohibited in electroplating and passivation in some western countries.For technique development and environment protection,it is very important to study a low toxicity alternative to chromate passivation treatment. 

Research Progress of Trivalent Chrome Passivation on Zinc Plating

Research Status of Trivalent Chromium Passivation for Zinc Coatings

Research Advances of Trivalent Chromium Black Passivation Process

PROGRESS OF NON-CHROME PASSIVATION FOR ZINC COATING

Progress in Research of Chromate-free Passivation of Zinc and Zinc Alloy Galvanized Steel

Advances in Research on Chromate-free Passivation for Zinc Coating

Study of Trivalent Chromium Bright Blue Passivation for Zinc Coating

Advances in Research on Unchromium Passivation of Galvanized Zinc Layer

Review on effects of components in passivation bath on trivalent chromium passivation of zinc coating

Progress in Research on Chromium-Free Passivation of Galvanized Wares

Study on Trivalent Chromium Iridescent Passivation Process for Zinc Coating

Chromium-Free Passivating Technology for Zinc Plating

Trivalent Chromium Passivation Process for Zinc Coating

Trivalent Chromium Black Passivation for Zinc Deposit and Its Influence on Corrosion Resistance

Research Development of Non-chromate and Tri-chromium Passivation

Progress of Research on Chromium Plating with Trivalent Chromium Compound

Informations of Cr Plating in Trivalent Chromium Electrolytes

Blue-white trivalent chromium passivation process on zinc coating with high corrosion resistance

Causes for the Formation of Cr6+in Cr3+ Passivation Film and the Affecting Factors

Progress in Research of Film-Formation and Anticorrosion Mechanisms of Rare Earth Passivation Coatings on Zinc Substrate

A Study of Non-Chromium Passivating for Zinc Coating