Abstract:Hexavalent chromium (Cr(VI)) waste produced by chrome plating activities pollutes the surrounding environment and harms human health. However, information about the chromium (Cr) pollution characteristics of actual electroplating sites is still lacking. In this study, the concentration, leachability and speciation of Cr in soils from a typical chrome plating site were analyzed. Our results showed that this site was severely contaminated by Cr (7.2 to 7735.2 mg/kg) and Cr(VI) reached the mean concentration of 138.7 mg/kg. The spatial distribution of Cr(VI) was related to the plating processes. Chrome plating and sewage treatment areas could be considered as the hot spots of contaminated sites. The vertical distribution of Cr(VI) was mainly affected by soil properties, where the loam layer retained and reduced a large amount of Cr(VI) due to its high content of iron minerals and finer particle fractions. Additionally, the chemical extraction results showed that Cr was mainly in non-residual fractions and the existence of Cr(VI) led to a high leaching toxicity based on the toxicity characteristic leaching procedure (TCLP) results. Moreover, X-ray photoelectron spectroscopy (XPS) results revealed the speciation of Cr in the long-term contaminated soils. A large amount of Cr(VI) was reduced into Cr(III) and mainly existed as Cr(OH)3 and Cr2O3. Furthermore, Cr(VI) tended to precipitate as CaCrO4 and persisted in soils. Therefore, it is necessary to find appropriate strategies to remediate these contaminated soils. Overall, these findings strengthen our understanding of Cr(VI) behaviors and lay a foundation for the future pollution investigation, ecological remediation and risk assessment of sites contaminated by electroplating.

Progress in Research on Chromium-Free Passivation of Galvanized Wares

Progress on the Technology of Treating Wastewater from Electroplating and Resource Recovery

Study on environment-friendly passivation for hot-dip galvanized steel with high corrosion resistance

Preparation and Characterization of Cr-free passivation films on zinc coating using Response Surface Methodology and Electrochemical Methods

A Review of Recent Developments in Coating Systems for Hot-Dip Galvanized Steel

Effects of Silanes on the Structure and Properties of Chromium-Free Passivation

Design of a Ti-Zr-P-Si Chromium-Free Passivation Composite Film with High Corrosion Resistance and Eco-Friendliness on Tinplate

Trivalent Chromium Passivation Process for Zinc Coating

Recycling technology and progress of research on chromium

Trivalent chromium passivation for zinc coating and sealing of passivation film

Comparisons of Air and Water Oxidation on the Passive Properties of Chromium

Chromium Distribution, Leachability and Speciation in a Chrome Plating Site

Method for production of substrate with chromium vi free and cobalt-free passivation

Blue-white trivalent chromium passivation process on zinc coating with high corrosion resistance

Investigations on corrosion resistance of steel coated with chromium-free ZTM conversion coating

The Development of Low-Cost Cleaning Agent for Zinc Coat

Trivalent chromium passivating agent with high corrosion resistance used for rapid film formation on steel plate surface

Comparison of the corrosion resistances of chromium-passivated and cerium-passivated Zn/NdFeB magnets

The Investigation and Application of A.V.Passivation of Stainless Steel

Preparation and performance study of manganate and PU composite passivation film

Investigation of the Preparation, Corrosion Inhibition, and Wear Resistance of the Chromized Layer on the Surfaces of T9 and SPCC Steels