Abstract:(A) Effect of various micro‐structure development (scheme images) in EWF‐fracture behavior (FESEM images) of PP/EPDM/SiO2 ternary blend‐nanocomposites, (B) FESEM images taken from the sub‐surface zones of EWF‐fractured specimen of PP/EPDM/SiO2 (One‐step) ternary sample showing the sequence of micromechanical deformations under quasi‐static EWF test. This study investigates the mechanical properties and fracture behavior of polypropylene (PP)‐based blend‐nanocomposites comprising 30 wt.% ethylene–propylene–diene monomer (EPDM) and 5 wt.% SiO2 nanoparticles. Different mixing sequences were employed to prepare the nanocomposites, and the resulting morphology development and dispersion states of modifiers were analyzed. Mechanical performance of the nanocomposites was evaluated through quasi‐static and high‐speed dynamic fracture tests. The dispersion and distribution of SiO2 nanoparticles within the nanocomposites were significantly influenced by the mixing protocol. In impact fracture tests, the presence of nanoparticles exhibited a beneficial efffect on fracture energy, demonstrating a synergistic toughening effect of the soft EPDM and rigid SiO2 particles. Conversely, adverse effects were observed in quasi‐static tests. Essential work of fracture (EWF) parameters indicated an increase in the yielding component and a decrease in the necking‐to‐tearing component with SiO2 incorporation into the PP/EPDM blends. During impact loadings, the highest improvement in crack propagation resistance was observed in nanocomposites with nanoparticles localized around the rubbery domains forming a network‐like structure of EPDM/SiO2‐nanoparticles. Morphologies where rubber domains and nanoparticles were separately distributed in the PP matrix resulted in the lowest fracture parameters. Energy dissipation mechanisms were elucidated, revealing multiple void formation followed by matrix shear yielding as the primary source under both quasi‐static and impact fracture conditions. In the latter case, stress‐concentrating percolated structures in the PP matrix facilitated the nucleation of dilatational bands evolving into highly stretched void‐fibrillar structures upon further loading. These findings contribute valuable insights into tailoring nanocomposite morphologies for enhanced mechanical performance in different loading scenarios. Highlights Fracture behavior of PP/EPDM/SiO2 ternary systems was evaluated by EWF methodology and Izod impact test. Rubber particles surrounded by silica nanoparticles led to a percolated morphology and as a result to superior impact resistance. EWF parameters were mostly controlled by the tearing‐related parts regardless of phase morphology. The impact toughness was mainly controlled by the dispersion and distribution characteristics of the SiO2 nanoparticles.

Study on the Cooperative Toughening of Dynamic Vulcanized PP/EPDM/nano-SiO2 Composites with Double Particles

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

Effects of nano-SiO_2 on reinforcing and toughening polypropylene

Effect of Wet Surface Treated Nano-Sio2 on Mechanical Properties of Polypropylene Composite

Mechanical Properties Of Pp/Epdm/Nano-Sio2 Ternary Composites

Study on PP/EPDM Blend Toughened by Dynamic Vulcanization

Crystallization Behaviour and Mechanical Properties of Polypropylene Copolymer/Silicon Dioxide Nanocomposites

Study on the Crystalline Structure and Crystallization of PP/nano-SiO2 Composite

Synergistic Effect of Compound Rubber and SiO2 Nanoparticles on Low-Temperature Toughening and Balanced Stiffness-Toughness of Random Copolymer Polypropylene Nanocomposites

Structure And Mechanical Properties Controlling Of Elastomer Modified Polypropylene By Compounded Beta/Alpha Nucleating Agents

Synergistic effect of compound rubber and SiO 2 nanoparticles on low-temperature toughening and balanced stiffness-toughness of random copolymer polypropylene nanocomposites

Investigations on Nano-CaCO3 Reinforced and Toughening Polypropylene/Elastomer Composites

STUDY ON FABRICATION AND SYNERGISTIC EFFECTS OF POLYPROPYLENE COMPOSITES FILLED WITH COMPOUND INORGANIC PARTICLES

Crystallization Behavior of PP in Composites with EPDM and a Surface Modified Nano-Calcium Carbonate

Study on the Properties and Structure of Polypropylene Modified with Nano-Sized CaCO_3

Relations between morphology and dynamic mechanical properties of SiO2/EPDM composites

Processing–microstructure–fracture toughness relationships in PP/EPDM/SiO2 blend‐nanocomposites: Effect of mixing sequence

The Relationship between Microstructure and Properties in PP/Rubber Powder/nano-CaCO3 Ternary Blends

Synergistic Effect of Compound Particles Reinforcing and Toughening Recycled Polypropylene

The Properties and Morphologies of Composites Based on Sulfated EPDM Ionomer Toughed Polypropylene Highly Filled with Mg(OH)2

Mechanical Properties and Morphologies of Polypropylene Composites Synergistically Filled by Styrene‐butadiene Rubber and Silica Nanoparticles