Abstract:Using tert-butyl peroxy-2-ethyl hexanoate (TPRO) as initiator,the vinyl acetate (VAc) bulk grafting polymerization in the presence of polyethylene glycol (PEG) to get the PEG-g-PVAc was studied. The time evolution of polymerization rate,grafting ratio,grafting efficiency and molecular weight of the grafted copolymer were investigated respectively for various weight ratios of VAc to PEG. The results show that,with increasing VAc?PEG ratio,the polymerization rate and final conversion ratio are both enhanced,and an observable automatic acceleration phenomenon begins to appear. The overall reaction rate coefficient K increases with reaction time at higher VAc:PEG ratio,while a tendency of decrease of K with reaction time at lower VAc:PEG ratio was observed. At almost all VAc:PEG ratios,the grafting ratio was found to increase linearly with the conversion ratio,and the grafting efficiency keeps almost unchanged throughout the whole conversion. The grafting ratio is in proportion to VAc:PEG ratio,while the grafting efficiency is generally very high and can reach above 95% at low VAc?PEG ratio. Although the PEG grafted efficiency increases with both monomer consumption and rising VAc?PEG ratio,the overall PEG grafted efficiency is low,it indicates that a great amount of undrafted PEG exists. The phenomenon of high VAc grafting efficiency accompanying with low PEG grafted efficiency indicates that the 'Graft From' polymerization system may undergo a 'Graft Onto' mechanism. According to the definition,the PEG-g-PVAc number-average molecular weights were calculated,and the results show that the number-average molecular weights reduce at first with the increase of conversion ratio,and then approach to a constant; the higher the VAc?PEG ratio,the higher the number-average molecular weight. Via GPC analysis and PVAc universal calibration,the PDI (polydispersity index) of the grafted copolymer was determined to be between 1.5 ～ 2.5 and it aggrandizes with the increase of VAc concentration and conversion. It might be considered that,all these phenomena are related to the gel effect in the polymerization system.

STUDY OF GRAFTING NVP MONOMER ON POLYPROPYLENE NOV-WOVEN

Kinetic Study of Vinyl Acetate Graft Polymerization on PEG

Simultaneous Graft Polymerization of Polypropylene with Maleic Anhydride and Butyl Acrylate

Bulk Graft Modification of Polyolefin Membranes by Combining Pre-Irradiation-Induced Graft and Supercritical Co2-Swelling Polymerization

Graft Copolymerization of Styrene and Acrylonitrile in the Presence of Poly(propylene glycol): Kinetics and Modeling

Study of LDPE/NVP system surface grafting polymerization

Preparation of Temperature-Sensitive Polymer Films by Surface Photografting Techniques

Surface modification of polypropylene microfiltration membranes by graft polymerization of N-vinyl-2-pyrrolidone

Study on the Graft Reaction of Poly(propylene) Fiber with Acrylic Acid

Study on Solid Phase Grafting of Acrylic Acid onto Polypropylene to Prepare Hydrophilic Polypropylene

Surface Grafting Polymerization of Acrylonitrile Onto Polypropylene Film

Study on the surface grafting of polypropylene fibers

The graft modification of poly acrylonitrile(PAN) membranes in NVP aqueous solution by low-temperature plasma

Study on Novel Graft Copolymer EVA-g-PU

Vapor Phase Grafting of Vinyltrimethoxysilane and Its Crosslinking on Polypropylene

Preparation and Characterization of Graft Copolymer EVA-g-PU

Study of multi-monomer melt-grafting onto polypropylene in an extruder

Advance in Solid-Phase Graft Polymerization of Polypropylene and Graft Mechanism

THE STUDY OF APPLIED BEHAVIOR OF PP/PA6 BY USING GRAFTED POLYPROPYLENE AS COMPATILIZER

Study of Maleic Anhydride and Styrene Grafted Onto Polypropylene Induced by UV Irradiation

Synthesis of multifunctional polypropylene via solid phase cografting and its grafting mechanism