Abstract:A major problem in membrane technology for applications such as wastewater treatment or desalination is often the loss of membrane permeability due to biofouling initiated froth protein adsorption and biofilm formation on the membrane surface. In this study, we developed a relatively simple and yet versatile approach to prepare polypropylene (PP) membrane with highly effective non-biofouling performance. Copolymer brushes were grafted to the surface of PP membrane through UV-induced polymerization of two oppositely charged monomers, i.e., [2-(methacryloyloxy)ethyl]trimethylammonium chloride (TM) and 3-sulfopropyl methacrylate potassium salt (SA), with varying TM:SA molar ratios. Surface analysis with scanning electron microscope (SEM) clearly showed the grafted copolymer brushes on the membrane surfaces and that with X-ray photoelectron spectroscope (XPS) revealed a similar TM:SA ratio of the grafted copolymer brushes to that of the monomer solution used for the polymerization. Water contact angle measurements indicated that the hydrophilicity of the membrane: surfaces was remarkably improved by the grafting of the TM/SA copolymer brushes, with the lowest water contact angle of 27 degrees being achieved at the TM:SA ratio of around 1:1. Experiments for antiprotein adsorption with bovine serum album (BSA) and lysozyme (LYZ) and antibiofilm formation with Escherichia coli (E. coli) demonstrated a great dependence of the membrane performance on the TM:SA ratios of the grafted copolymer brushes. It was found that the characteristics of the surface charges of the membrane surfaces played a very important role in the non-biofouling performance, and the membrane surface with balanced positive and negative charges showed the best non-biofouling performance for the proteins and bacteria tested in this study.

The graft modification of poly acrylonitrile(PAN) membranes in NVP aqueous solution by low-temperature plasma

Nanofiltration Membrane Prepared from Polyacrylonitrile Ultrafiltration Membrane by Low-Temperature Plasma: 4. Grafting of N-Vinylpyrrolidone in Aqueous Solution

Bulk Graft Modification of Polyolefin Membranes by Combining Pre-Irradiation-Induced Graft and Supercritical Co2-Swelling Polymerization

Improving the Hydrophilicity of Poly(vinylidene Fluoride) Porous Membranes by Electron Beam Initiated Surface Grafting of AA/SSS Binary Monomers

Nanofiltration Membrane Prepared from Polyacrylonitrile Ultrafiltration Membrane by Low-Temperature Plasma: 5. Grafting of Styrene in Vapor Phase and Its Application

Surface modification of PVDF porous membranes by electron irradiation

Surface Modification of Polyvinylidene Fluoride （PVDF） Membranes by Low-Temperature Plasma with Grafting Styrene

Low-temperature plasma modification of polyvinylidene fluoride (PVDF) membrane by graft of styrene in gas

Thermo-responsive polyacrylonitrile membranes prepared with poly(acrylonitrile-g-isopropylacrylamide) as an additive

Surface Modification of Poly(tetrafluoroethylene) Films Via Plasma Treatment and Graft Copolymerization of Acrylic Acid

Surface Modification of Porous Polypropylene Membrane by PlasmaInitiated RAFT Graft Polymerization of Hydroxyethyl Methacrylate

Surface Modification of Porous Polypropylene Membrane by Plasma-Initiated RAFT Graft Polymerization

SYNTHESIS OF ACRYLONITRILE-N-ISOPROPYLACRYLAMIDE GRAFT COPOLYMERS FOR THE PREPARATION OF THERMAL RESPONSIVE POLYACRYLONITRILE MEMBRANAES

A Novel Plasma-Induced Surface Hydrophobization Strategy for Membrane Distillation: Etching, Dipping and Grafting

Graft polymerization of N-isopropylacrylamide into a microporous polyethylene membrane by the plasma method: technique and morphology

Surface modification of polypropylene microfiltration membranes by graft polymerization of N-vinyl-2-pyrrolidone

Temperature-sensitive membranes prepared by the plasma-induced graft polymerization ofN-Isopropylacrylamide into porous polyethylene membranes

PREPARATION OF STIMULI-RESPONSIVE MEMBRANE BY PLASMA GRAFT POLYMERIZATION OF POLY(N-ISOPROPYLACRYLAMIDE) ONTO PE MEMBRANE

Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

Study on the hydrophobic modification of PVDF membrane by low-temperature plasma etching in combination with grafting in supercritical carbon dioxide

Surface Modification Of Microporous Polypropylene Membranes By Plasma-Induced Graft Polymerization Of Alpha-Allyl Glucoside