Abstract:Poly(vinylidene fluoride) (PVDF) membranes possessing interconnected bicontinuous structures with superior mechanical properties and improved hydrophilicity were obtained from PVDF/N,N-dimethylacetamide (DMAc)/Tween 80/water systems via non-solvent induced phase separation (NIPS) with 60 °C and ambient temperature casting solution. Tween 80/H2O mixtures were adopted as dopant; water/ethanol (50:50, mass ratio) and ethanol were chosen as coagulants. The effects of process parameters in terms of variations in dopant contents, casting solution temperatures, and coagulant compositions on the phase inversion process and performance of the resultant membranes were investigated. During the demixing process, water diffused from the interior of Tween 80 reverse micelles, resulting in an accelerated precipitation rate and surface segregation process of the polar head groups of Tween 80. The high temperature of the casting solution contributed to enhancing the diffusion rate of liquid–liquid demixing on crystallization. The coagulant compositions changed the liquid–liquid and solid–liquid demixing dynamics of the casting solutions. Ethanol coagulant contributed to crystallization of PVDF/DMAc/Tween 80/water systems prior to liquid–liquid demixing. This delayed demixing process favored the formation of porous foliage-type top structures with fibril or lath bicontinuous fine structure of membrane bulk, increasing flux, and significant hydrophilicity improvement. Casting solutions in water/ethanol coagulant exhibited a less delayed demixing process with both liquid–liquid demixing and crystallization, resulting in formation of fine structure in the form of strings or stripes and limited hydrophilicity improvement. The predominant typical α- and β-type crystallinity in PVDF was attributed to the existence of dopants, the high temperature of the casting solution, and water/ethanol coagulant. This was consistent with the superior mechanical properties of the corresponding PVDF membrane. The newly developed hydrophilic PVDF membranes with superior mechanical properties and low-fouling of bovine serum albumin (BSA) are anticipated to be suitable not only for wastewater treatment, but also for bioseparation.

Study on the hydrophobic modification of PVDF membrane by low-temperature plasma etching in combination with grafting in supercritical carbon dioxide

Preparation Of Superhydrophobic Pvdf Membrane By Chemical Vapor Deposition

Superhydrophobicity of polyvinylidene fluoride membrane fabricated by chemical vapor deposition from solution

Surface immobilization of polymer brushes onto porous poly(vinylidene fluoride) membrane by electron beam to improve the hydrophilicity and fouling resistance

Fabrication of Self‐cleaning Poly(vinylidene Fluoride) Membrane with Micro/nanoscaled Two‐tier Roughness

Improving the Hydrophilicity of Poly(vinylidene Fluoride) Porous Membranes by Electron Beam Initiated Surface Grafting of AA/SSS Binary Monomers

Superhydrophobic poly(vinylidene fluoride) film fabricated by alkali treatment enhancing chemical bath deposition

Porous poly(vinylidene fluoride) membrane modified with hyperbranched poly(amine-ester)

Surface modification of PVDF porous membranes by electron irradiation

Surface Modification of Polyvinylidene Fluoride （PVDF） Membranes by Low-Temperature Plasma with Grafting Styrene

Low-temperature plasma modification of polyvinylidene fluoride (PVDF) membrane by graft of styrene in gas

Hydrophobic Modification of a PVDF Hollow Fiber Membrane by Plasma Activation and Silane Grafting for Membrane Distillation

Surface modification of polyvinylidene fluoride (PVDF) membrane via radiation grafting: novel mechanisms underlying the interesting enhanced membrane performance

Preparation and Characterization of Pvdf Microporous Membrane with Highly Hydrophobic Surface

Controllable construction of zwitterionic polymer grafting modified polyvinylidene fluoride (PVDF) microfiltration membrane

Surface Modification of Poly(Vinylidene Fluoride) Membrane with Hydrophilic and Anti-Fouling Performance Via A Two-Step Polymerization

Porous Poly(Vinylidene Fluoride) Membrane with Highly Hydrophobic Surface

Plasma etching assisted fabrication of PDA/PEI modified PVDF membranes for oil/water emulsion separation

A Novel Plasma-Induced Surface Hydrophobization Strategy for Membrane Distillation: Etching, Dipping and Grafting

Characterization and Preparation of Poly(vinylidene Fluoride) (PVDF) Microporous Membranes with Interconnected Bicontinuous Structures Via Non-Solvent Induced Phase Separation (NIPS)

Surface modification of a PVDF membrane by co‐grafting hydroxyl and zwitterionic polymers to enhance wettability and antifouling property