Abstract:The change rule of forming force and the load-restraining mechanism of vibration machining during the extrusion process of spline under low frequency vibration were studied. Using the frequency modulated and amplitude modulated vibration extrusion forming machine developed by our research group as the experimental equipment, a forming force measurement system was built to measure the change of forming force during vibration extrusion spline, and the data were analyzed. The results show that the forming force is mainly related to the amplitude of vibration, especially the retreat stroke. When the retreat stroke is large enough, the friction between the die and the workpiece stretches the workpiece to the yield stage and immediately reverses the extrusion. Because of Bauschinger effect, the forming force decreases significantly. In addition, good lubrication conditions can effectively reduce the forming force and the instantaneous retreat of the die. When the material deformation zone is opened, the lubricant enters, which reduces the friction between the material and the die, thus reducing the forming force. The experimental results show that for extrusion forming of involute external spline with 0.47 modulus and 36 teeth, the forming force decreases by 27% when the frequency is 10 Hz, the forward travel is 1.38 mm and the backward travel is 0.67 mm, and the load reduction effect is remarkable.

Key technology of plastic forming with low frequency vibration

Experimental Study of High-Frequency Vibration Assisted Micro/Mesoscale Forming of Metallic Materials

Effects of superimposed high-frequency vibration on deformation of aluminum in micro/meso-scale upsetting

Mechanism and Experimental Research on High Frequency Vibratory Stress Relief

Acoustic softening and hardening of aluminum in high-frequency vibration-assisted micro/meso forming

Applying Low-Frequency Vibration For The Experimental Investigation Of Clutch Hub Forming

Study on Metal Forming Patterns of the Ultrasonic Vibration Assisted Upset-extruding Process

Acoustic Softening and Residual Hardening in Aluminum: Modeling and Experiments

Influence of ultrasonic vibration on forming force of 1060 aluminum sheet single point incremental forming

Modeling of Metallic Surface Topography Modification by High-Frequency Vibration

The Effect Of Superimposed Low-Frequency Vibration On Tensile Deformation Of Low-Carbon Steel

Experimental and Numerical Study of Forming Limit in 1060 Aluminum Ultrasonic Vibration Single Point Incremental Forming

Research Progress and Outlook of High-frequency/ultrasonic Vibration Assisted Microforming

Mechanical Behavior and Microstructure of Low-Carbon Steel Undergoing Low-Frequency Vibration-Assisted Tensile Deformation

Status Analysis of Plastic Processing Technology with Ultrasonic Vibration

Microstructure and forming mechanism of metals subjected to ultrasonic vibration plastic forming: A mini review

Mechanism of Superplastic Deformation of Magnetron Sputtering Nanomaterial under the Condition of Ultrasonic Vibration

Effect of speed sinusoidal pulsating enhancement on the mixing property of plastic machinery

Research on forming performance of TA1 subjected to ultrasonic vibration

Experimental study on the forming process of spline by frequency and amplitude modulated axial vibration extrusion

Experimental Study on Improving the Mechanical Properties of Material Extrusion Rapid Prototyping Polylactic Acid Parts by Applied Vibration