Abstract:Much of surplus ammunition stockpile inevitably requires demilitarized processing technology in the explosives industry. For the safe waste treatment and recycle, the thermoplastic polymer bonded explosive (PBX) can effectively reduce the military cost and non-conforming products. In addition, the thermoplastic PBX has excellent application prospect as the future explosive due to the good mechanical properties and insensitivity. However, for high solid content, most of thermoplastic PBXs still maintain a considerable viscosity even in high-temperature melting state, rendering traditional casting process unsuitable. In this study, a measuring method was adopted to accurately obtain the correlation of Pressure-Volume-Temperature (PVT) for the simulative materials of thermoplastic PBX at first. The equations of state for PVT and viscosity model were then created, which are of great significance in single screw extrusion. An experiment system of single screw extrusion was designed to implement the molding process considering the poor liquidity problem of the thermoplastic materials. Excellent molding stability (rho<0.5 % variation) was achieved for the extrusion system. Moreover, a numerical investigation was also performed. Good agreements were yielded by comparing the simulation data and experimental results. The effects of operational parameters, i. e., the entrance pressure, barrel temperature and rotation speed on molding process of the thermoplastic materials were investigated in detail. The wall shear stress decreases with the feed inlet well sealed whereas the maximum temperature rise increases a little due to limited thermal diffusion. Either increasing temperature or decreasing rotation speed is beneficial to overall process safety. However, production cycle and attainable molding density also need to be considered at the same time. Furthermore, the process parameters should be optimized on the basis of the PVT and viscosity properties of material in practice. The investigations above can be a better guidance for the development and implementation of thermoplastic PBXs molding process.

Effect of speed sinusoidal pulsating enhancement on the mixing property of plastic machinery

Progress on agitated apparatus for polymer devolatilization and its CFD simulation

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Study on the Effect of Axial Vibration of Screw in Plasticating Process (Extrusion Part)

Theoretical and Computational Analysis on the Melt Flow Behavior of Polylactic Acid in Material Extrusion Additive Manufacturing under Vibration Field

Effect of Vibration Parameters on Properties of Polypropylene in Dynamic Plasticizing Process

Mixing performance in a miniature conical twin screw extruder with batch filling

Experimental Study on Improving the Mechanical Properties of Material Extrusion Rapid Prototyping Polylactic Acid Parts by Applied Vibration

Study of Dynamic Flow and Mixing Performances of Tri-Screw Extruders with Finite Element Method

Development of pulsating extensional stress induced melt mixer and its application for polypropylene/carbon fibers composites

Study on Mechanical Properties and Molecular Aggregate of the Dynamic Extrusion Polymer Filling System

Enhancing a Multi-Field-synergy Process for Polymer Composite Plasticization: A Novel Design Concept for Screw to Facilitate Phase-to-phase Thermal and Molecular Mobility

Simultaneously achieving self-toughening and self-reinforcing of polyethylene on an industrial scale using volume-pulsation injection molding

Study on Properties of Filling Systems in Plastic Axial Vibration Injection Processing

Mixing and Thermal Transport Behavior in a Pin or Non-Pin Extruder Equipped with a Field Synergy Elongation Screw

Study on Dynamic Mixing Quality During Twin-screw Extrusion

Study of screw configuration vs UPVC plastic injection moulding mixing influence

Experimental and Numerical Analysis of Single Screw Extrusion Process for Thermoplastic PBX Based on PVT Properties

Key technology of plastic forming with low frequency vibration

The Design and Simulation of Vibrate Impact Extrusion Die

The Optimization Of Several Technological Parameters Of Ultrasonic Vibration Aided Flow-Forming