Abstract:Hybrid toughening approach for PP using sustainable reinforcements. We did not add to the manuscript since we are not sure of the format. Hybrid interaction/co‐working mechanisms of waste cellulose (WC) fibers and expanded vermiculite (V) in polypropylene (PP) resulted in stronger, stiffer, and thermally durable composites are presented. Fibrous WC and particulate V inclusions were mixed with the PP matrix via high shear thermokinetic mixer under 4000 rpm. Thermal and mechanical characterization efforts assisted with fractographic investigations are performed on five sample sets such as (i) two‐phase WC fibrous PP composites and (ii) three‐phase WC–V hybrid composites. Results suggested that as the main reinforcement agent WC is able to increase the axial stiffness of PP (1.7 GPa) up to 4 GPa (30WC) as the weight fraction increases with a reduction in ductility. However, a strength threshold due to WC cluster entanglement, which leaves partially non‐wet clusters of WC and limited crystallization volume for PP at high WC weight fractions, is noted. In situ formed V platelets placed between WC fibers are proven to provide PP crystallization loci to further increase the axial stiffness (4.1 GPa) and matrix brittleness. When used with 10WC, they significantly increased the ability of PP matrix r to resist the failure events associated with the presence of randomly aligned WC fibers. Such ability is further highlighted in the 20WC10V case where the inherent problem of WC entanglement increased the contribution of polymer shear failure to the overall tensile response of manufactured composites. A significant increase in tensile strength (55%) for this case was recorded which makes the proposed hybridization effort more advantageous to conventional short fiber reinforcing strategies. Highlights Stiffer and stronger PP‐based hybrid composites with waste cellulose and vermiculite. Tensile failure/toughening mechanisms in hybrid PP composites Sustainable approach for reinforcement selection.

Development of pulsating extensional stress induced melt mixer and its application for polypropylene/carbon fibers composites

In-Situ Bubble Stretching Assisted Melt Extrusion for the Preparation of HDPE/UHMWPE/CF Composites

Self-Toughening and Self-Reinforcing of Polypropylene Via Melt-Volume-Pulsation-Induced Crystalline Network

The Optimization of Process Parameters and Characterization of High-Performance CF/PEEK Composites Prepared by Flexible CF/PEEK Plain Weave Fabrics

Highly Filled Waste Polyester Fiber/Low-Density Polyethylene Composites with a Better Fiber Length Retention Fabricated by a Two-Rotor Continuous Mixer

Modification of polypropylene by melt vibration blending with ultra high molecular weight polyethylene

Enhancing Mixing and Thermal Management of Recycled Carbon Composite Systems by Torsion-Induced Phase-to-Phase Thermal and Molecular Mobility

Effect of Material Properties on the Foaming Behaviors of PP-Based Wood Polymer Composites Prepared with the Application of Spherical Cavity Mixer

Enhancement in the Mechanical Properties of in Situ Microfibrillar PLA/POE Composites

Preparation of MWCNTs/CF/PEEK Multi-Scale Composites with Good Mechanical and Electrical Conductivity by a Two-Step Process of AFP and Out-of-autoclave Tempering

Preparation of super-toughened Poly(L-lactide) composites under elongational flow: A strategy for balancing stiffness and ductility

The Injected Foaming Study of Polypropylene/Multiwall Carbon Nanotube Composite with In Situ Fibrillation Reinforcement

"Like binding a book": Interfacial improvement of pre-melted ultrahigh molecular weight polyethylene by pulse vibration molding

Toughening and reinforcing wood flour/polypropylene composites with high molecular weight polyethylene under elongation flow

A novel PLA/P(3HB-co-4HB)/MWCNT composite featuring enhanced mechanical properties and excellent thermal stability based on elongational rheology

Carbon Fiber Reinforced Recycled Polypropylene/Polyolefin Elastomer Composites with High Mechanical Properties

Interfacial control and dispersion characteristics of polylactic acid fiber/pulp fiber composites

Improving the interfacial shear strength of polypropylene/carbon fiber nonwoven composite by three different methods

A sustainable hybrid strengthening/stiffening approach for injection molded polypropylene matrix thermoplastic composites

Toughening and reinforcing waste polypropylene with POE / nano‐SiO 2 under elongational flow

Ink-Eliminated Waste Paper Sludge Flour-Filled Polypropylene Composites with Different Coupling Agent Treatments