Abstract:Corona discharge is being detected by UV-light imaging technology at home and abroad these years.There are many factors causing corona discharge.Many factors during the design,manufacture,installation,operation and maintenance of the electrical equipments will cause defect of external insulation,which results in electric field concentration and the phenomenon of corona discharge.The phenomenon of discharge could be detected by the UV-light imaging technology more sensitively and more conveniently so that the discharge points can be located very quickly and exactly at field.The external insulation structure of the most electrical equipments in power system has the characteristic of the severe non-uniform electric field.The typical physical models are the "rod-plate" gap and the "rod-rod"gap.While the electric field of the "rodrod" gap is more uniform than the "rod-plate" gap(the maximum electric field intensity of the former disperses near the top of the both rod electrodes,and that of the latter concentrates the rod electrodes).Therefore,in the structure designs of the external insulation of HV electrical equipments and the air gap,the "rod-plate" gap is considered as the physical model to check and design.The characteristic variable of UV-light(the photon number within unit interval detected by the UV-light imaging device) is adopted as the characterizing parameter of quantifying the intensity of corona discharge;the discharge level(the quantity of discharge) and the corona impulse current at the same power frequency voltage level are adopted as the comparing parameter;under the circumstance of almost the same atmosphere,the study on corona discharge test under the power frequency voltage of the severe non-uniform electric field based on the UV-light imaging technology is conducted.The results illuminate that the corresponding relationship between the characterizing parameter of quantifying the intensity of corona discharge and the comparing parameter is accordant;the characterizing parameter can reflect each stage of corona discharge;it can also distinguish each stage of corona discharge and the distribution of the characteristic variable of UV-light at each stage of corona discharge accords with the statistical regularity.The criterion of selecting the intersection of the characteristic variable of UV-light at the stage of stream discharge as the advertent range is proposed.

Study on Time-Lag of Void Discharge Based on CIGRE-Ⅱelectrode System

Partial discharge diagnosis by simultaneous observation of discharge pulses and vibration signal

Influence of Void Dimensions on Partial Discharge in Solid Insulation

Study on Structural Parameters and Analysis Method of Soil Successive Impulse Discharge Channel

Experimental Research on Effect of Applied Voltage on One-Dimensional Electroosmotic Drainage

Partial discharge modeling with increasing applied voltages across different void sizes

Experiment and Simulation of Air Gap Breakdown Characteristics Under Short-tail Impulse Waveform

A Method for Measurement of Step Voltage Rise Time of Partial Discharge Calibrators

Study on Relationships Between High-Frequency High-Voltage Pulse Breakdown Voltage of Air-Gaps and Pulse Delay Time

Experiment Project of Analysis on Long Air Gap Discharge

Corona Discharge of the Severe Non-uniform Electric Field Based on the UV-light Imaging Technology

Simulation comparison of the positive and negative surface discharges induced by metal particles in a plate-surface-plate structure under DC excitation in atmospheric air

Internal Electrostatic Discharge Modeling: Validation and Fitting Using Tests on Insulated Wires

Study on Pulse Current of Partial Discharge by Using Joint Time-Frequency Analysis Methods

Estimation time delay from field emission to secondary electron emission avalanche in vacuum surface flashover

Characterization and Comprehension of Corona Partial Discharge in Air under Power Frequency to Very Low Frequency Voltage

Dynamic development model for long gap discharge streamer-leader system based on fractal theory

Partial Discharge Characteristics of a Void Defect inside an Actual 252-kV GIS Post Insulator

Comparison of different impulse current measurement method during long air gap breakdown

Study on waveform characteristics of partial discharge pulses in air

Effect of a floating conductor on discharge characteristics of a long air gap under switching impulse