Abstract:Surface discharge induced by metal particles is a common insulation failure in many high-voltage equipment. In order to further understand the mechanisms of this surface discharge, a 2D simulation model of a plate-surface-plate structure with a pin is established and verified by experiments in this paper to simulate the actual discharge configurations, and the evolution characteristics of the positive and negative surface discharges are compared. The evolutions of both positive and negative discharges could be divided into two phases: the bridging phase and the expansion phase. As the electric field in the gap between the streamer and the dielectric surface is strengthened by the effect of the space charge, the ionization sources and the secondary electrons excited on the dielectric surface, the dielectric surface presents attraction to the streamer, and subsequently the two streamer routes first touch the dielectric surface and then arrive at the grounding electrode. However, the channel branching is the most distinctive characteristic of the positive and negative discharges. In the positive discharge, the channel first branches, then merges, and finally expands, and the gaps of pin to dielectric surface and pin to grounding electrode are broken down by two slender positive branches, respectively. The negative discharge presents a stout channel without branching, which develops and expands simultaneously. This is ascribed to the thinner space charge layer, the weaker shielding effect of the internal electric field and the more active movement of the internal charges in the positive discharge. Another important factor for the discharge branching is the appropriate matching of the sheath thickness and the curvature radius of the channel's head.

Experiment Project of Analysis on Long Air Gap Discharge

Analysis of Positive DC and AC Discharge on Long Air Gap under Rain Conditions

Simplified Modeling of the Power-electronized Load Based on Sensitivity Analysis

Experimental Study of Protection Measures for Preventing 10 KV Insulated Conductors from Breakage Caused by Lightning Stroke

Analysis of Standard Operation Wave and Lightning Wave on Long Air Gap Discharge under Rain Conditions

Research on Calculation of Rod-plane Long Air Gaps Breakdown Voltage

Dynamic development model for long gap discharge streamer-leader system based on fractal theory

Experiment and Simulation of Air Gap Breakdown Characteristics Under Short-tail Impulse Waveform

Research on the DC Rain Flashover Mechanism of Polluted Post Insulators

Discharge Performance of Different Models at Low Pressure Air

A Modified Model for Discharge Voltage of AC Transmission Line-Tower Air Gaps

Simulation comparison of the positive and negative surface discharges induced by metal particles in a plate-surface-plate structure under DC excitation in atmospheric air

Study on Structural Parameters and Analysis Method of Soil Successive Impulse Discharge Channel

Modelling for switching impulse breakdown of live working gaps between equipotential worker and transmission towers

Experiment Research of DC External Insulation in High Attitude Area

Effect of a floating conductor on discharge characteristics of a long air gap under switching impulse

Modeling of Positive Switching Impulse Discharge of UHV Transmission Line Air Gaps

Research Progress on Parameters Measurement of Air Gap Discharge

Arc-extinguishing simulation and experiment on gas blast arc-extinguishing lightning protection gap

Research on the Characteristic of Streamer Discharge at Low Air Pressure

Experimental Study on Streamer Discharge Characteristics Along Contamination Insulator Surface