Abstract:High Performance Polymers, Ahead of Print. The properties of a RTM bismaleimide resin with low viscosity and ultra-high temperature resistance were systematically investigated, including its curing kinetics and rheological properties, and the thermal and mechanical properties of its cured resins. The thermal curing kinetics was investigated by differential scanning calorimetry (DSC) method with multiple heating rates. DSC curves display a cure regime in the temperature range of 150∼300°C and the exothermic peaks shift from 194°C to 231°C with heating rate. The apparent activation energy of curing reaction is calculated as 78.2 kJ/mol. The rheological properties were studied in terms of the changes of the non-isothermal and isothermal viscosity tested using a rotary viscometer. The test results show that the RTM resin has a wide molding temperature window from 90°C to 200°C and long molding time at 110°C for 275 min with a flow viscosity less than 1000 mPas. Dual-Arrhenius model was established to predict the viscosity characteristics at different constant temperatures, showing a good agreement with the experimental data. Four curing cycles were designed to obtain cured networks with different microstructures, and the thermal and mechanical properties of the cured resins suffered from various curing cycles were characterized by dynamic mechanical analysis (DMA) and universal material testing machine. The results exhibit that the cured product has a ultra-high glass transition temperature of 373.5°C and larger flexural strength of 145.4 MPa after post-curing at 250°C for 10 h.

STUDY ON THE LONG SHELF-LIFE RESIN TRANSFER MOLDING(RTM)EPOXY RESIN

Contributions of Side Groups to the Water Diffusion in Cured Epoxy Resins (2) Study on Physical Aging

Study on Processing Performance of TDE-85 Epoxy Resin Matrixes Using RTM

Study on Chemorheology of Low Temperature Curing LT-01A Epoxy Resin System

Curing behavior and properties of ultra-high temperature resistant RTM bismaleimide resin

Numerical Study of Resin Transfer Molding (RTM) Curing Process

Preparation and characterization of a novel microcapsule-type latent curing agent for epoxy resin

Research progress of low temperature curing agent for epoxy resin composites

Rapid curing epoxy resin and the properties of carbon fiber/epoxy composite

Development and application of resin transfer moulding (RTM) to aviation industry

CHEMORHEOLOGICAL BEHAVIOR AND CURE KINETICS OF SILICON-RYLACETYLENE-CONTAINING RESIN FOR RESIN TRANSFER MOLDING

THE PREPARATION OF MODERATE-TEMPERATURE CURING EPOXY RESINS USED AS HOT-MELT PREPREG

A Moderate Temperature Curing Epoxy Resin System for Wet Fiber-winding

Monitoring for Residual Strain of Resin Cure During the Process of RTM Composites

Synthesis Characterization and Properties of Novel Latent Thermal Catalyst for Epoxy Resin

An acrylic resin system for in‐situ pultrusion: Curing performances and rheology

Study on the post-curing reaction of epoxy resin during aging

A New Method To Improve The Stability, Tensile Strength, And Heat Resistant Properties Of Shape-Memory Epoxy Resins: Two-Stages Curing

Study on the low-temperature toughness of rubber-modified epoxy resin

Thermal Behaviors of the Resin and Mold in the Process of Resin Transfer Molding

Effect of curing agents n‐octylamine and m‐xylene diamine on the mechanical and memory properties of E51 epoxy resin