Analysis of Data Processing Mechanism of RasDD

沈重谦,潘金贵

DOI: https://doi.org/10.3969/j.issn.1000-3428.2002.02.099

2002-01-01

Abstract:In this paper, we provide the detailed analysis of RasDD mechanism of data processing , and put forward a novel method to develop the customized printer driver in Windows NT by combining the RasDD and minidriver. It can improve the mere minidriver preformance and give more flexiblity for printer driver.

What problem does this paper attempt to address?

Research and Development on PCI Bridge IP

沈海斌,潘国振,何乐年,严晓浪

DOI: https://doi.org/10.3969/j.issn.1007-0249.2003.06.003

2003-01-01

Abstract:High performance PCI (Peripheral Component Interconnect) bridge IP (Intellectual Property) compliant with the PCI 2.2 specification is designed and two circuit structures with improved reusablity is proposed. Key techniques are analyzed. A verification platform of PCI protocol is built to facilitate performance tests including PCI compatibility. In order to ensure the correctness of the testing platform, a method of format examination is adopted to realize the correct description of PCI protocol.
Data Compression and Storage under High Speed Network

ZHANG Bao-jun,PING Ling-di,PAN Xue-zeng,WANG Jie-bing

DOI: https://doi.org/10.3785/j.issn.1008-973x.2009.09.007

2009-01-01

Abstract:A practical scheme was proposed aiming at the problem of data compression and storage under high speed network.The scheme compressed the data with hardware and software,and without any performance affection to the network speed.HIFN data reduction(DR) series high performance lossless data compression card was used in hardware.The card had multi 9630 compression chips and used the eLZS compression algorithm to provide fast data compression and decompression with satisfactory compression ratio.An eLZS module embedded in the DR device driver compressed and decompressed the data seamlessly when the hardware was failure in order to make the system run normally.The Windows driver of DR was developed in order to make DR compression card work on Windows effectively.The scheme was realized on both Linux and Windows platform and showed good performance under the test.
Device Driver under Real-time Windows Target Based on C MEX S Function

HOU Dian-qing,GONG Guo-fang,WANG Lin-tao

2012-01-01

Journal of Computer Applications

Abstract:Considering the Real-time Windows Target of Matlab only supports some well-known international vendors' equipment,while a large number of domestic equipment cannot be used,the driver of analog output channels was written based on C MEX S function taking Advantech's PCI1727U card as hardware platform.Different from xPC driver,Matlab did not provide related hardware operating functions and device driver programing tutorials on Real-time Windows Target,therefore the device driver programing under Real-time Windows Target mostly depended on exploration and testing.In the end,the written driver was tested taking PCI1713 as an aided card.The testing results indicate that the written driver of PCI1727U can output the given signal to the test system,which provides theoretical foundation and guiding principle for the further utilization of data acquisition system based on Real-time Windows Target.
Study on the Real-Time Serial Communication Based on Windows

陈月斌,邬义杰,刘楚辉

DOI: https://doi.org/10.3969/j.issn.1001-2265.2003.12.003

2003-01-01

Abstract:Aiming at the real-time property of serial communication between upper and lower computer of distributed control system under Windows, based on the study on VxD work characteristic and the mechanism of serial communication, this paper describes the programming method of real-time serial communication,by using VtoolsD tool, which is good solution to the key technology of developing control system of precision machining.
Design of AC-PDP Data Driver IC

HONG Hui,HAN Yan,YE Xiao-wei

DOI: https://doi.org/10.3969/j.issn.1001-9146.2006.05.007

2006-01-01

Abstract:An advanced PDP data driver IC is designed for the PDP system.Based on analyzing the structure and characteristic of HV-VDMOS and HV-PMOS,the process and the basic parameters for PDP data driver IC are proposed.Then the data driver IC is fabricated in 2.0um Bipolar-CMOS-DMOS process.The test results show that the designed high voltage device can meet practice needs.
Program Design and Application of Stepping Motor Driven by Parallel Printer Interface

宫闽军,商俊敏,宋立军,吴乘波,徐志农,周晓军

DOI: https://doi.org/10.3969/j.issn.1001-2265.2004.06.023

2004-01-01

Abstract:This article introduces a convenience and feasible system that can take advantage of program to control the I/O of parallel printer interface to drive the stepping motors and that is applied in the experiment device of detection. In order to drive the stepping motors, this system makes use of the data-output ports of parallel printer interface that have the flip-latch function to transmit required-frequency pulse by controlling parallel printer interface's I/O.
Design of USB Floppy Driver Based on WinCE

Ding Wei,Lü Liang,Zhao Guangzhou

DOI: https://doi.org/10.3969/j.issn.1000-0380.2009.03.005

2009-01-01

Abstract:Aiming at the problem of the currently popular embedded operating system WinCE.NET,that is not fully supporting USB floppy driver,an implementing strategy for USB floppy based on WinCE.NET is put forward.By adopting stream interface driver model,the USB floppy driving program is developed;The control of USB floppy is implemented with UFI technology.The method and whole procedures for formatting USB floppy are given;the program has been applied successfully in ARM9-based multi-functional computerized embroidery machine.The program is simple and easy to use;it is good reference for developing driving program for similar USB devices.
Study on the Real-time Serial Communication Based on Virtual Device Driver in Win9x

冷洪滨,邬义杰

DOI: https://doi.org/10.3969/j.issn.1001-4551.2004.05.004

2004-01-01

Abstract:To meet the real-time request of serial communication between upper and under computer under Win9x, this paper studies the mechanism of serial communication and VxD, and presents the programming method of serial communication based on VxD using VtoolsD.
Research on Linux Device Driver Rense

Huan WANG,Jun-jie MAO,Dan WANG,Yu CHEN

DOI: https://doi.org/10.11896/j.issn.1002-137X.2017.04.009

2017-01-01

Abstract:Device drivers is an important factor affecting the applicability of the operating system.Considering the large cost of completely developing a device driver,reusing existing device drivers in the operating system became the preferred method for improving the applicability of operating system.Reuse of device driver process is essentially a target environment set up process of device drivers,reusing a device driver does not need to implement all of the kernel services.Code dependency analysis could recognize the dependency between device driver and kernel service.Device driver environment can be built by code dependency analysis technology automatically.Through reusing the e1000 network adapter driver,the feasibility of this method was proved.
Design and Implementation of Device Driver for Encryption Card under Windows 2000

姜明华,丁益祥

DOI: https://doi.org/10.3969/j.issn.1009-5160.2004.01.017

2004-01-01

Abstract:WDM is a new type development model of device driver. This paper has analyzed the basic mechanism in combination with development, detailedly introduced specific methods and main details of developing device driver using Windows DDK under Windows 2000, and given a main framework of the program.
The Floppy Driver Control System Based on DSP

戈挺克,颜钢锋

DOI: https://doi.org/10.3969/j.issn.1001-4551.2004.12.011

2004-01-01

Abstract:The DSP(Digital Signal Processor) have got extensive application in the realtime control system because of its rapid instruction processing.This paper proposes a means of controlling the floopy driver based on the TMS320LF2407 of the TI Corp., provides the circuit architecture of the floppy control system, and develops the software with C language . The system completes all kinds of functions of the floppy and the file access function based on the FAT12 file system.
Design of device driver based on stream interface driver model under WinCE

DING Wei,QI Donglian

DOI: https://doi.org/10.3969/j.issn.1000-0682.2012.01.013

2012-01-01

Abstract:To enhance flexibility of embed system,USB floppy driver is developed under WinCE.NET,based on the structure of stream interface driver,the characteristics of load mechanism of stream interface driver,UFI technology is used to control USB floppy,USB floppy format method and detailed process are presented finally.The driver has been successfully applied in the regional water monitoring and measuring instrument based on ARM9,and it extended the functionality of the instrument,a good reference value is provided for similar device.
Design of Device Driver Base on RTEMS Operation System

蒋文杰,陈文智

DOI: https://doi.org/10.3969/j.issn.1001-182X.2006.06.018

2006-01-01

Abstract:This paper explains the framework of the RTEMS--an embedded real time operation system. and emphasizes on the design of device driver.
MECHANISM OF SOFTWARE RAID DRIVER IN LINUX

王沛,韩耀伟,刘斌,潘金贵

DOI: https://doi.org/10.3969/j.issn.1000-1220.2001.03.013

2001-01-01

Abstract:This paper introduces the meaning of the RAID (Redundant Array ofInexpensive Disks), its classification and its applications in Linux. It also discusses the architecture of the software RAID device driver and the mechanism of the buffer cache. Furthermore, the detailed implementation of the RAID1 is analyzed as an example.
Design and Implementation of Distributed Raster Spatial Database Engine

LU Lizhen,ZHU Guangliang,LIU Renyi

DOI: https://doi.org/10.3969/j.issn.1560-8999.2007.04.012

2007-01-01

Geo-information Science

Abstract:Raster spatial database engine(RasSDE) is a key technique to achieve distributed query and efficient management of massive rater data. An object-oriented raster spatial data organizing model is proposed. A distributed four-tired architecture of RasSDE is designed. Database services,application interface and appli-cation services are analyzed. Core component framework and its object classes of RasSDE are discussed. MAMS V2.0 system based on RasSDE is given. The main aims of the system are to realize the object-oriented raster spatial data organization,integrative massive spatial data management and distributed spatial data computing. The comparison experiments of disk read-write and network transmission synthesized capabilities between RasSDE and ArcSDE are performed. The results show that raster data network transmission efficiency of RasSDE is higher than that of ArcSDE,and RasSDE can satisfy the demand of massive raster spatial data transfers.
Design and Implementation of Printer Monitor System

REN Li-xue,LIU Zhi-gui,ZHAO Qiang,PENG Gui-li

DOI: https://doi.org/10.3969/j.issn.1001-3695.2007.12.070

2007-01-01

Abstract:Aim at the problem that it is difficult to manage the printer of factory,Used active directory to manage printers,and designed a printer monitor system based on active directory.By this system,the registered user could print documents,and the process could be record into the database as a log document no matter the task be success or not.The unregistered user could not print documents.It would delete the print task and record the print log when the system checked out an illegal user.This system accomplishes an effective monitor to the users and print tasks,affords a convenience and quick way to the monitor of print in factory.
METHOD AND IMPLEMENTATION OF LINUX DEVICE DRIVER DEVELOPMENT

WANG Xiao-long,HE Ke-zhong,FANG Xiao-cui,DING Dong-hua

DOI: https://doi.org/10.3969/j.issn.1671-1513.2005.03.007

2005-01-01

Abstract:This paper introduced the method for Linux device driver development, wrote driver program for THIPC-7462 Measure/Control Board and described it's implementation on THMR-V telepresence system.
Computer Parallel Port Communication Control and Cooperation With Printer

丁宋威,宁新宝,赵玉成

DOI: https://doi.org/10.3969/j.issn.1002-2279.2001.02.020

2001-01-01

Microprocessors

Abstract:The article describes the implementation of an adapted circuit which can make the parallel port communication control cooperate with the printer and assure the security and reliability of the application control system's hardware and software.
WDM Driver Program for Digital Film Image Decoding Board According with DCI Specification

沈宏伟,许超

DOI: https://doi.org/10.16208/j.issn1000-7024.2008.08.041

2008-01-01

Abstract:The methods to design WDM driver programs of PCI devices using Microsoft DDK and Compuware DriverWorks are intro-duced,and an example,the design of driver program for digital film image decoding board according with DCI(digital cinema initiatives,LLC) specification,are given.The following aspects of driver program design are discussed including the structure of WDM driver programs for PCI devices,the different handling methods for different kinds of I/O requests,the processing procedure of DMA in driver program and the synchronization of DMA threads,the main points to port driver programs from single-CPU system to multi-CPU system.The experimental results shows that the driver program can control the circuit board to decode in real time the DCI specified film image sequences whose maximum data rate reaches the upper limit(250 M Bits/sec) suggested by DCI specification.
Design of EPP Driver and Inspection of Data Exchange Program on Tank Bottom Floor Inspector

王珅,黄松岭,赵伟

DOI: https://doi.org/10.3969/j.issn.1000-7466.2008.05.009

2008-01-01

Abstract:The design of enhanced parallel port(EPP) driver and data exchange program used for portable PC on oil tank floor inspection device were introduced.The EPP driver module was developed with WinDriver tool in kernel mode in response to parallel port interrupts,read and buffer port data.The data exchange module communicates with main program developed with LabVIEW through Windows Socket mechanism.The limitation of LabVIEW of not supporting EPP in interrupt working mode was got over to ensure the inspection of data transmitting.

Analysis of Data Processing Mechanism of RasDD

Research and Development on PCI Bridge IP

Data Compression and Storage under High Speed Network

Device Driver under Real-time Windows Target Based on C MEX S Function

Study on the Real-Time Serial Communication Based on Windows

Design of AC-PDP Data Driver IC

Program Design and Application of Stepping Motor Driven by Parallel Printer Interface

Design of USB Floppy Driver Based on WinCE

Study on the Real-time Serial Communication Based on Virtual Device Driver in Win9x

Research on Linux Device Driver Rense

Design and Implementation of Device Driver for Encryption Card under Windows 2000

The Floppy Driver Control System Based on DSP

Design of device driver based on stream interface driver model under WinCE

Design of Device Driver Base on RTEMS Operation System

MECHANISM OF SOFTWARE RAID DRIVER IN LINUX

Design and Implementation of Distributed Raster Spatial Database Engine

Design and Implementation of Printer Monitor System

METHOD AND IMPLEMENTATION OF LINUX DEVICE DRIVER DEVELOPMENT

Computer Parallel Port Communication Control and Cooperation With Printer

WDM Driver Program for Digital Film Image Decoding Board According with DCI Specification

Design of EPP Driver and Inspection of Data Exchange Program on Tank Bottom Floor Inspector