METHOD AND IMPLEMENTATION OF LINUX DEVICE DRIVER DEVELOPMENT

WANG Xiao-long,HE Ke-zhong,FANG Xiao-cui,DING Dong-hua

DOI: https://doi.org/10.3969/j.issn.1671-1513.2005.03.007

2005-01-01

Abstract:This paper introduced the method for Linux device driver development, wrote driver program for THIPC-7462 Measure/Control Board and described it's implementation on THMR-V telepresence system.

What problem does this paper attempt to address?

Device Driver under Real-time Windows Target Based on C MEX S Function

HOU Dian-qing,GONG Guo-fang,WANG Lin-tao

2012-01-01

Journal of Computer Applications

Abstract:Considering the Real-time Windows Target of Matlab only supports some well-known international vendors' equipment,while a large number of domestic equipment cannot be used,the driver of analog output channels was written based on C MEX S function taking Advantech's PCI1727U card as hardware platform.Different from xPC driver,Matlab did not provide related hardware operating functions and device driver programing tutorials on Real-time Windows Target,therefore the device driver programing under Real-time Windows Target mostly depended on exploration and testing.In the end,the written driver was tested taking PCI1713 as an aided card.The testing results indicate that the written driver of PCI1727U can output the given signal to the test system,which provides theoretical foundation and guiding principle for the further utilization of data acquisition system based on Real-time Windows Target.
Progrmming of a Device Driver for VxWorks

李立志,张朝阳,陈文正

DOI: https://doi.org/10.3969/j.issn.1000-3428.2003.04.073

2003-01-01

Abstract:After describing the real time operating system VxWorks in brief, this paper discusses how to write a VxWorks device driver in a general fashion including writing an character-specific device driver and block device driver . The non-standard interface device driver is also discussed here . Moreover , it discusses what device driver is needed to implement in a gateway project and their implementations.
Video Driver Development Based on V4L2

徐家,陈奇

2010-01-01

Abstract:In embedded system,especially with low system resources,good driver structural design can effectively reduce memory and CPU occupation,hence improve the system’s performance.V4L2 is a new framework for video device driver development under Linux,and a in-depth study on the running mechanism of V4L2 is given.By making full use of its properties,a V4L2 driver develop method is presented for video device based on reducing system resource consumption and promoting driver’s behavior,and its validity is proven by experiment.
Study on the Real-time Serial Communication Based on Virtual Device Driver in Win9x

冷洪滨,邬义杰

DOI: https://doi.org/10.3969/j.issn.1001-4551.2004.05.004

2004-01-01

Abstract:To meet the real-time request of serial communication between upper and under computer under Win9x, this paper studies the mechanism of serial communication and VxD, and presents the programming method of serial communication based on VxD using VtoolsD.
Design of device driver based on stream interface driver model under WinCE

DING Wei,QI Donglian

DOI: https://doi.org/10.3969/j.issn.1000-0682.2012.01.013

2012-01-01

Abstract:To enhance flexibility of embed system,USB floppy driver is developed under WinCE.NET,based on the structure of stream interface driver,the characteristics of load mechanism of stream interface driver,UFI technology is used to control USB floppy,USB floppy format method and detailed process are presented finally.The driver has been successfully applied in the regional water monitoring and measuring instrument based on ARM9,and it extended the functionality of the instrument,a good reference value is provided for similar device.
Design of Device Driver Base on RTEMS Operation System

蒋文杰,陈文智

DOI: https://doi.org/10.3969/j.issn.1001-182X.2006.06.018

2006-01-01

Abstract:This paper explains the framework of the RTEMS--an embedded real time operation system. and emphasizes on the design of device driver.
Design of USB Floppy Driver Based on WinCE

Ding Wei,Lü Liang,Zhao Guangzhou

DOI: https://doi.org/10.3969/j.issn.1000-0380.2009.03.005

2009-01-01

Abstract:Aiming at the problem of the currently popular embedded operating system WinCE.NET,that is not fully supporting USB floppy driver,an implementing strategy for USB floppy based on WinCE.NET is put forward.By adopting stream interface driver model,the USB floppy driving program is developed;The control of USB floppy is implemented with UFI technology.The method and whole procedures for formatting USB floppy are given;the program has been applied successfully in ARM9-based multi-functional computerized embroidery machine.The program is simple and easy to use;it is good reference for developing driving program for similar USB devices.
Developing of device driver for DPR basing on embedded linux

Zhao Wei,Zhang Xinkai,Tan Caihong

DOI: https://doi.org/10.3321/j.issn:0254-3087.2006.z3.113

2006-01-01

Abstract:In this article, some relative concepts of embedded operating system and its development are introduced. emphases are on the character of embedded Linux and how to program for device driver basing on it, on the other hand, some knowledge, such as interrupt handle and data exchange between kernel space and user space, are mentioned simply.
Study on the Real-Time Serial Communication Based on Windows

陈月斌,邬义杰,刘楚辉

DOI: https://doi.org/10.3969/j.issn.1001-2265.2003.12.003

2003-01-01

Abstract:Aiming at the real-time property of serial communication between upper and lower computer of distributed control system under Windows, based on the study on VxD work characteristic and the mechanism of serial communication, this paper describes the programming method of real-time serial communication,by using VtoolsD tool, which is good solution to the key technology of developing control system of precision machining.
Development of Linux Network Driver Based on USB Device

WU QIANG,ZHOU SHUHUA,MA ZHENGXIN

DOI: https://doi.org/10.3969/j.issn.1008-0570.2007.02.003

2007-01-01

Abstract:A design method of USB network driver in Linux is described, together with introductions to architecture and network sub-system of Linux. By getting full use of both Linux network sub-system and USB bus, this method largely decreases program complex-ity,and increases the robustness of network driver.
Instrument Driver for Signal-Oreinted ATS

Feng Qin Wang,Chang Jin Wang,Tian Jie Guo,Yu Liu

DOI: https://doi.org/10.4028/www.scientific.net/amm.198-199.678

2012-01-01

Applied Mechanics and Materials

Abstract:The virtual instrument technology and auto test system software architecture for the Signal-Oriented test are first introduced, and then the requirement of virtual instrument driver module is analyzed. Finally, the design scheme of virtual instrument driver module based on Component Object Model component technology is given. Using the scheme, we developed 22 kinds of the test instruments driver. Experiment results show that the scheme improved the driver scalability, maintainability and reusability greatly.
Design and implement of the video capture card device driver under Linux

Wang Jianfei,Meng Yanjie,Zhao Yong

DOI: https://doi.org/10.3969/j.issn.1008-0570.2007.02.037

2007-01-01

Abstract:This paper introduce the structure of the video capture device driver under Linux, describe the detail implementation of the Philip 7146 based video capture card device driver using v4l2 API.
Research on Linux Device Driver Rense

Huan WANG,Jun-jie MAO,Dan WANG,Yu CHEN

DOI: https://doi.org/10.11896/j.issn.1002-137X.2017.04.009

2017-01-01

Abstract:Device drivers is an important factor affecting the applicability of the operating system.Considering the large cost of completely developing a device driver,reusing existing device drivers in the operating system became the preferred method for improving the applicability of operating system.Reuse of device driver process is essentially a target environment set up process of device drivers,reusing a device driver does not need to implement all of the kernel services.Code dependency analysis could recognize the dependency between device driver and kernel service.Device driver environment can be built by code dependency analysis technology automatically.Through reusing the e1000 network adapter driver,the feasibility of this method was proved.
Embedded Linux Device Drivers Development

Shiju Li

2006-01-01

Abstract:With Linux operating system being already more and more acceptable,many enterprises apply Linux as development platform.The concept of Linux device drivers program is mainly elaborated and the general module framework and particular development process of the device drivers under embedded Linux are dissected in the article.The relationship between Linux device driver and kernel is illustrated.Furthermore,how to design and program the modulesized device drivers under embedded Linux are expounded by examples.Moreover,the core code is explained.
Design and Create Saving Data Base on Embedded System

Ruiyang Wang

2006-01-01

Abstract:Iintroduced a method of saving data base on embedded Linux OS,and expatiated the design process of the device driver programming of IDE hard disk in embedded Linux OS,then discussed the subject about saving a great deal of data in embedded system.
DVB-CI Device Driver Development on Embedded Linux System

ZHOU Qing-xi,LIU Qiang

2005-01-01

Abstract:The method was introduced to encapsulate the detailed controls of the concrete DVB-CI device with device driver and provide the up-layer program an Abstract device on the embedded Linux system. A DVB-CI device driver based on MontaVista's Hard Hat Linux system and IBM STB02500 Set-Top Box Integrated Controller was implemented as an example.
Design and Implementation of the Expansion AD7705 Device Driver Based on S3C2440A

GAN Kaifeng,WANG Jun,WANG Jizhou

DOI: https://doi.org/10.3969/j.issn.1673-1980.2012.05.039

2012-01-01

Abstract:The application that the microprocessor(S3C2440A) uses SPI to expand AD7705 is studied, constructing the development platform by the embedded Linux operating system,giving the hardware connection diagram of AD7705 and S3C2440A and the realization of the AD7705 driver.It provides a solution for the embedded devices drive in data acquisition,having a high value of engineering application.
Programming of Drivers for DSP Extension Bus Interface in Embedded Linux

盛健,王锋,季晓勇

DOI: https://doi.org/10.3969/j.issn.2095-347x.2004.01.021

2004-01-01

Abstract:This paper discusses the programming of drivers for DSP extension bus interface on embedded Linux platform, and implements the communication between MCF5272 MCU and TMS320C6202 DSP. The cooperation to each other makes both powerful enough to meet those occasions that requires high speed computations, controls and communications.
Design and implementation of multi-channel CAN communication interface based on embedded Linux

Dai Gang,Gong Guanghua,Shao Beibei,Su Wei

DOI: https://doi.org/10.1109/ICEMI.2009.5274256

2009-01-01

Abstract:According to the communication and control requirement of multi-channel Control Area Network(CAN) bus by the HLA simulation platform, this paper described a embedded PowerPC system based method of design and implementation of multi-channel CAN communication platform. The corresponding Linux multi-channel CAN device driver has also been developed. This flexible system can connect to different number of CAN daughter boards. It can work stable with low CPU usage under the condition of high data rate on multi channels. ©2009 IEEE.
Application of Device Driver in EPP_CAN Experimental Communication System

Qian Cao

2005-01-01

Abstract:EPP model parallel port and CAN bus are generally introduced. The definition and use of virtual device driver VxD are specified. Also, the application of VxD driver in the interface realization of EPP model parallel port and CAN bus is focused on. Combining with the VxD application, an EPP-CAN based experimental communication system is introduced. Using VxD driver, this system successfully realizes the interface of CAN bus and EPP model parallel port. It can well accomplish the information transmission between them and response interruptions in time, thus realizes the real-time net communications of CAN bus.

METHOD AND IMPLEMENTATION OF LINUX DEVICE DRIVER DEVELOPMENT

Device Driver under Real-time Windows Target Based on C MEX S Function

Progrmming of a Device Driver for VxWorks

Video Driver Development Based on V4L2

Study on the Real-time Serial Communication Based on Virtual Device Driver in Win9x

Design of device driver based on stream interface driver model under WinCE

Design of Device Driver Base on RTEMS Operation System

Design of USB Floppy Driver Based on WinCE

Developing of device driver for DPR basing on embedded linux

Study on the Real-Time Serial Communication Based on Windows

Development of Linux Network Driver Based on USB Device

Instrument Driver for Signal-Oreinted ATS

Design and implement of the video capture card device driver under Linux

Research on Linux Device Driver Rense

Embedded Linux Device Drivers Development

Design and Create Saving Data Base on Embedded System

DVB-CI Device Driver Development on Embedded Linux System

Design and Implementation of the Expansion AD7705 Device Driver Based on S3C2440A

Programming of Drivers for DSP Extension Bus Interface in Embedded Linux

Design and implementation of multi-channel CAN communication interface based on embedded Linux

Application of Device Driver in EPP_CAN Experimental Communication System