Abstract:Herein, the ZM61 alloys extruded at the extrusion ratios of 39 and 84 are named as ZM61‐39 alloy and ZM61‐84 alloy, respectively. The tensile mechanical properties and microstructure of both ZM61‐39 and ZM61‐84 alloys deformed at room temperature and different high strain rates (100, 500, and 1000 s−1) along extrusion direction (ED) are investigated. The results show that, with the increase of strain rate, the strength of ZM61‐39 alloy changes a little, while the strength of ZM61‐84 alloy gradually increases. The fracture strain of both ZM61‐39 and ZM61‐84 alloys decreases as strain rate increases. The strength of ZM61‐39 and ZM61‐84 alloys shows different trends with increasing strain rates, which is mainly attributed to their different deformation mechanisms. The tension twinning‐basal slip dominates the deformation of ZM61‐39 alloy at high strain rates. And the nonbasal slip is the main deformation mechanism of ZM61‐84 alloy at high strain rates. In addition, ZM61‐39 alloy exhibits lower strength and better ductility than ZM61‐84 alloy at same high strain rates, which is strongly affected by the grain size. The tensile deformation behavior and deformation mechanism of the extruded ZM61 alloy with different initial microstructure (ZM61‐39/ZM61‐84 alloy) at high strain rates are investigated. The results clearly show that the deformation characteristics of ZM61 alloy with different initial microstructure are obviously different at high strain rates, which is mainly attributed to their different deformation mechanisms.

Microstructure and Mechanical Properties of Large ZK60 Magnesium Alloy Extruded Profiles

High-strength and high-plasticity ZK60 magnesium alloy prepared by rapid solidification and high-speed extrusion

Investigation of microstructure and mechanical properties of ZK60 magnesium alloy achieved by extrusion-shearing process

Microstructure and Mechanical Properties of Thin ZK61 Magnesium Alloy Sheets by Extrusion and Multi–pass Rolling with Lowered Temperature

Microstructure and Mechanical Properties of Extruded Mg-Zn-Y Alloy

Numerical and Experimental Investigation on Hot Backward Extrusion Process of Mg-Gd-Y-Zn-Zr Magnesium Alloy

Anisotropic Plastic Deformation Behavior of As-Extruded ZK60 Magnesium Alloy at Room Temperature

Microstructure and mechanical properties of extruded ZK60 magnesium alloy containing rare earth

Microstructure and mechanical properties of Mg-Gd-Zn-Zr alloy after hot extrusion

Microstructural characterization and mechanical response of the extruded ZK61 magnesium alloy under dynamic and quasi-static loading

Microstructure and High Tensile Ductility of ZK60 Magnesium Alloy Processed by Cyclic Extrusion and Compression

Tensile Mechanical Properties and Deformation Mechanism of the Extruded ZM61 Magnesium Alloy at High Strain Rates

Investigation of the microstructure and properties of extrusion-shear deformed ZC61 magnesium alloy under high strain rate deformation

Hot Deformation Behavior and Workability of Pre-Extruded ZK60A Magnesium Alloy

Dynamic precipitation and enhanced mechanical properties of ZK60 magnesium alloy achieved by low temperature extrusion

Microstructure Evolution of ZK61m Magnesium Alloy Sheet during Erichsen Test

Cyclic Hardening Behavior of Extruded ZK60 Magnesium Alloy with Different Grain Sizes

Study of the microstructure, texture and tensile properties of as-extruded AZ91 magnesium alloy

Evolution of Microstructure and Tensile Properties of Extruded Mg-4Zn-1Y Alloy

Study on Partial Remelting Microstructures and Mechanical Properties of ZK60-RE Magnesium Alloy

Microstructures and Mechanical Properties of Hot-extruded Mg-6Zn-xCu-0.6Zr(x=0,0.5,1.0,1.5) Alloys