Abstract:Conventional methods for hot extrusion of magnesium (Mg) alloy sheets have limitations for microstructure improvement and mechanical property enhancement. Co-extrusion of Mg alloy with an Al alloy core provides an opportunity for refining the grain size and improving basal texture. This study introduces a novel severe plastic deformation (SPD) method, Direct Extrusion-Continuous Shear (DE-CS), utilizing 6063 Al alloy as the core to fabricate innovative Mg/Al clad composite sheets. Monolithic Mg sheets (non-co-extruded condition) are extruded under identical conditions for comparison. By evaluating the microstructure and mechanical properties of AZ31 Mg alloy under co-extrusion and non-co-extrusion conditions, the positive effect of Mg-Al composite billet co-extrusion on AZ31 Mg alloy is established. The grain refinement effect in co-extruded samples is superior, enhancing plasticity without significant reduction in tensile strength. The microstructure evolution and dynamic recrystallization (DRX) behaviour of AZ31 Mg alloy during co-extrusion were analyzed comprehensively. The results indicate that, in the initial stages of deformation, various variants of {10-12} extension twins (ETs) play a crucial role in refining the original grains, forming initial [10-10]//ED fiber texture components alongside other non-basal components. Upon entering the shear deformation (SD) zone, deformed twins disappear, and small dynamically recrystallized (DRXed) grains emerge along boundaries of coarse deformation grains and within the grains. Strong shear deformations and compressive stress from transverse direction (TD) induce intensified prismatic and pyramidal slip, promoting continuous dynamic recrystallization (CDRX) and discontinuous dynamic recrystallization (DDRX). CDRX predominantly affects elongated deformed grains, forming an [10-10]//ED fiber texture through high-energy grain boundary segmentation. Subsequently, compatible stress increases due to the activity of non-basal slip dislocation and the reduction in grain boundary (GB) size. DDRX emerges as the dominant mechanism, generating randomized [10-10]//ED fiber and non-fiber textures within parent grains and at boundaries.

Microstructural characterization and mechanical response of the extruded ZK61 magnesium alloy under dynamic and quasi-static loading

Investigation of the microstructure and properties of extrusion-shear deformed ZC61 magnesium alloy under high strain rate deformation

Microstructure and mechanical properties of extrusion ZC61 alloys under different dynamic compression loading directions

Dynamic plasticity of AZ31 magnesium alloy: Experimental investigation and constitutive modeling

Dynamic mechanical response and microstructural evolution of extruded Mg AZ31B plate over a wide range of strain rates

Investigation of microstructure and mechanical properties of ZK60 magnesium alloy achieved by extrusion-shearing process

Dynamic compression properties and microstructural evolution of ZCW612 alloy under different strain levels

Tensile Mechanical Properties and Deformation Mechanism of the Extruded ZM61 Magnesium Alloy at High Strain Rates

Revealing the dynamic recrystallization mechanism, extrusion deformation mechanism, and tensile deformation behavior of Mg–6Al–1Zn–1.1Sc alloy

Microstructure and Mechanical Properties of As-Cast and Hot Extruded–Sheared ZG61 Alloy

Microstructure Evolution of ZK61m Magnesium Alloy Sheet during Erichsen Test

Deformation behaviour, microstructure evolution and dynamic recrystallization mechanism of AZ31 magnesium alloy under co-extruded by Mg-Al composite billet

Microstructural evolution and dynamic recrystallization model of extruded homogenized AZ31 magnesium alloy during hot deformation

High-strength and high-plasticity ZK60 magnesium alloy prepared by rapid solidification and high-speed extrusion

Flow Curve and Microstructure Analysis of a ZK60 Magnesium Alloy during Hot Compression Tests

Dynamic recrystallization of a wrought magnesium alloy: Grain size and texture maps and their application for mechanical behavior predictions

Microstructure evolution and characterization of the adiabatic shear bands in AZ31 magnesium alloy

High-speed deformation behaviour of 45° extruded magnesium alloy under quasi-in-situ conditions

Dynamic compression behaviour and microstructural evolution of the Mg–6Zn–2Ce–0.6Zr alloy

The Effect of Grain Size on the Strain Hardening Behavior for Extruded ZK61 Magnesium Alloy

Dynamic precipitation and enhanced mechanical properties of ZK60 magnesium alloy achieved by low temperature extrusion