Abstract:This work managed the extrusion strain path by designing various extrusion die cavities, successfully realizing the texture modification for the ZK60 magnesium alloy. The mechanisms involving the texture dependence on the extrusion die cavity as well as their effects on the mechanical properties were emphatically investigated. Results showed that dynamic recrystallization refined the grain size and improved the microstructure homogeneity in the three extrusion specimens, but did not produce too large microstructure differences. By comparison, significant texture differences developed owing to the various extrusion die cavities, which here were mainly reflected in the strong or weak texture components for the c-axes//TD and the c-axes//ND. Such texture differences started from the deformation texture instead of the recrystallization texture whose roles only consisted in dispersing the texture component and reducing the texture intensity. The results from the finite element analysis and the visco-plastic self-consistent model indicated that, in order to accommodate the different strain components induced by the extrusion die cavities, slip systems or tension twinning were activated differently, and this was the critical reason causing the above texture differences. One modified Hall-Petch relationship was adopted to analyze the conjoint effects of grain refinement and texture variation on the yield stress. Additionally, the quantitative results about deformation mechanism activation fractions demonstrated that the texture variations influenced the competition relationships between the twinning induced deformation and the slip dominant deformation, and the former generally produced the lower yield stress and the increasing stage of strain hardening rate, while the latter produced the higher yield stress and the continuous decline of strain hardening rate.

Cyclic Hardening Behavior of Extruded ZK60 Magnesium Alloy with Different Grain Sizes

The Effect of Grain Size on the Strain Hardening Behavior for Extruded ZK61 Magnesium Alloy

Numerical and Experimental Investigation on Hot Backward Extrusion Process of Mg-Gd-Y-Zn-Zr Magnesium Alloy

Investigation of the microstructure and properties of extrusion-shear deformed ZC61 magnesium alloy under high strain rate deformation

Effects of extrusion die cavity on the texture components and the associated mechanical properties for ZK60 magnesium alloy

Tensile Mechanical Properties and Deformation Mechanism of the Extruded ZM61 Magnesium Alloy at High Strain Rates

Effects of initial grain size and orientation on the twin behavior in ZK60 Mg alloy

In Situ Monitoring of Dislocation, Twinning, and Detwinning Modes in an Extruded Magnesium Alloy under Cyclic Loading Conditions

Evolution of microstructure and texture of AZ80 magnesium alloy under hot torsion with constant decreasing temperature rate

High-strength and high-plasticity ZK60 magnesium alloy prepared by rapid solidification and high-speed extrusion

Dynamic precipitation and enhanced mechanical properties of ZK60 magnesium alloy achieved by low temperature extrusion

Investigation of microstructure and mechanical properties of ZK60 magnesium alloy achieved by extrusion-shearing process

Work-Hardening Behavior of a ZX10 Magnesium Alloy Sheet under Monotonic and Reverse Loadings

Relationship Between the Fatigue Behavior and Grain Structures of an As-Extruded Mg-6.2%Zn-0.6%Zr (in Wt.%) Alloy

High-speed deformation behaviour of 45° extruded magnesium alloy under quasi-in-situ conditions

Microstructure Evolution of ZK61m Magnesium Alloy Sheet during Erichsen Test

Flow Curve and Microstructure Analysis of a ZK60 Magnesium Alloy during Hot Compression Tests

Microstructural Evolution and Mechanical Properties of Extruded AZ80 Magnesium Alloy during Room Temperature Multidirectional Forging Based on Twin Deformation Mode

Dynamic Recrystallization, Texture Evolution, and Improved Mechanical Properties of Mg-Y-Zn-V Alloy during Forging and Subsequent Extruding Deformation

Microstructure, Tensile Properties and Work Hardening Behavior of an Extruded Mg–Zn–Ca–Mn Magnesium Alloy

Dynamic recrystallization of a wrought magnesium alloy: Grain size and texture maps and their application for mechanical behavior predictions