Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

Experimental Investigation of the Sharp Effect on Irregular Particles Mixing Behavior in Fluidized Bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Effect of Agitation on the Fluidization Behavior of a Gas–solid Fluidized Bed with a Frame Impeller

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

Experimental Investigation of Electrostatic Effect on Particle Motions in Gas-Solid Fluidized Beds

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

Experimental and Modeling Investigation of Liquid-Induced Agglomeration in a Gas–Solid Fluidized Bed with Liquid Spray

Investigation on Particle Mixing Characteristics of Municipal Solid Wastes Fluidized Bed Incinerator

Experimental Investigation of Electrostatic Effect on Bubble Behaviors in Gas-Solid Fluidized Bed

EXPERIMENTAL STUDY ON PARTICLE MOTION CHARACTERISTIC IN THE INTERNAL CIRCULATING FLUIDIZED BED

Research on Mixing Character of Fluidized Bed Particles with Image Processing Technique

Experimental Study of the Effect of Fluidization Velocity on the Segregation of Two Size Particles System

Experimental and numerical investigations on the hydrodynamics of gas-solid fluidized bed with an inclined agitator

Study on Mixing Performance of Municipal Solid Waste (MSW) in Differential Density Fluidized Beds (Fbs)

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

An Experimental Study on the Mixing Characteristics of Solids in an Annular Spouted Bed

Particle-Scale Simulation of Solid Mixing Characteristics of Binary Particles in a Bubbling Fluidized Bed

Visual Research on Big Particle Behavior in Dense-Phase Zone of Circulating Fluidized Bed

Comprehensive Study on the Mixing Behavior of Small Dissimilar Particles in a Fluidized Bed

Experimental study on particles mixing in an annular spouted bed