Abstract:Taking the fluidized pre-reduction process of iron ore powder bubbling fluidized bed as the background, for the problem of non-uniform structure in the bed of gas-solid fluidization process, the non-uniform fluidization characteristics of bicomponent particles are investigated in a cold two-dimensional bubbling fluidized bed by using a combination of physical experiments and mathematical simulations. Fluidization experiments were carried out under typical working conditions by using glass beads to study the effects of apparent gas velocity, mass ratio, and other factors on the non-uniform structure in the bed. Through the experimental observation of the bubble behavior, the effect of the cyclic change in bubble formation, rise and growth to rupture on the bed uniformity were analyzed. The experiments showed that the fluidized bed of two-component particles would be stratified, and the non-uniformity was strong in the upper part and weak in the lower part, and the apparent gas velocity and particle size were the main influencing factors. Based on the Euler-Lagrange reference frame modeling, the fluidization process of the two-dimensional bubble bed was simulated by the CFD-DEM method. The simulations of typical experimental conditions were carried out to further analyze the velocity distribution and the volume ratio of each phase in the bed from the gas-solid interaction level, revealing that the velocity distribution in the upper part of the bed is not uniform, and the gas flow is strongly perturbed, with intense bubble aggregation. The results reveal the reasons for the non-uniform phenomenon of gas-solid fluidization, which can provide a theoretical basis for the regulation of the non-uniform structure of the fluidization process.

Experimental Study of the Effect of Fluidization Velocity on the Segregation of Two Size Particles System

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Minimum fluidization velocity of bimodal polyethylene particles

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

Size Segregation of Binary Mixture of Solids in Bubbling Fluidized Beds

A Numerical Investigation on Segregation in Gas-Fluidized Beds of Short, Flexible Fibers

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

Computational fluid study of radial and axial segregation characteristics in a dual fluidized bed reactor system

Segregation and mixing of binary mixtures of spherical particles in a bubbling fluidized bed

Mixing/segregation characteristics and bubble behaviors of density-segregated binary particles in a pressurized fluidized bed

Bubble Dynamics and Particle Orientation in a Binary Fluidized Bed Containing Spherocylinders and Spheres

Investigation of flow behaviors in a fluidized bed reactor with binary mixture of Geldart-A and B particles

Effect of bed density on the segregation behavior of fine coal particles (<6 mm) in a gas–solid separation fluidized bed

Particle-Scale Simulation of Solid Mixing Characteristics of Binary Particles in a Bubbling Fluidized Bed

Segregation of binary particles in gas-solid fluidized bed

Investigation of mixing/segregation of mixture particles in gas-solid fluidized beds

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Experimental Simulation Studies on Non-Uniform Fluidization Characteristics of Two-Component Particles in a Bubbling Fluidized Bed

Micro-scale Simulation and Analysis of Gas-Solid Fluidized Bed with Multi-Density Distribution of Particles